mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Juerg Haefliger" <juergh@gmail.com>
To: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: "Jean Delvare" <khali@linux-fr.org>,
	"LM Sensors" <lm-sensors@lm-sensors.org>,
	LKML <linux-kernel@vger.kernel.org>,
	"Hans de Goede" <j.w.r.degoede@hhs.nl>,
	"David Hubbard" <david.c.hubbard@gmail.com>,
	"Rudolf Marek" <r.marek@assembler.cz>,
	"Krzysztof Helt" <krzysztof.h1@wp.pl>
Subject: Re: [lm-sensors] Hardware monitoring subsystem maintainer position is open
Date: Sun, 15 Apr 2007 10:54:29 -0700	[thread overview]
Message-ID: <191fb4ca0704151054n17b1b423i3df50c292a0cb1cf@mail.gmail.com> (raw)
In-Reply-To: <20070415150320.GA3158@jupiter.solarsys.private>

Hi Mark,


On 4/15/07, Mark M. Hoffman <mhoffman@lightlink.com> wrote:
> Hi Jean, et al:
>
> * Jean Delvare <khali@linux-fr.org> [2007-04-10 15:02:27 +0200]:
> > I am resigning from my role as hardware monitoring subsystem
> > (drivers/hwmon) maintainer. This is too much work for me, I do not have
> > the necessary bandwidth to review all the incoming patches, in
> > particular new drivers, in a timely manner. Patch authors have been
> > complaining about this repeatedly. This is no fun for them, and even
> > less for me, so I'd rather let someone else with more spare time take
> > care of it. If there are volunteers, this is the right time to speak up.
> >
> > I will still be maintaining the individual hardware monitoring drivers
> > I am listed for in file MAINTAINERS (adm1025, f71805f, lm83 and lm90)
> > as well as the I2C subsystem. No change here.
> >
> > I will continue to feed -mm with pending hwmon patches until 2.6.21
> > final is released, then I'll send everything I have to Linus for
> > 2.6.22-rc1, the last of which will be:
> >  (...)
>
> /me throws hat in
>
> I volunteer to become the new MAINTAINER, but in a much more limited sense
> of the term than Jean is/was.  I can take care of a couple git trees, and do
> some detailed reviews when I have time.  For the most part, I will have to
> rely on others to do reviews as well.
>
> I would not be volunteering for this role, if Juerg and others had not also
> volunteered to be more active reviewers.
>
> As for the discussions later in this thread about process... IMHO that's a
> little premature.  I intend to get brand new stuff into -mm perhaps a little
> earlier than Jean did... but it still ain't going to Linus before it's ready.
> Other than that, I would rather just see what works for me and for you (other
> hwmon authors).
>
> Assuming no one else wants the job (ruik?) I'll start working with Jean to
> get things set up as soon as I can.

Thanks a lot Mark! I'm sure everybody appreciates very much that you
volunteer for this position.

...juerg


> Thanks & regards,
>
> --
> Mark M. Hoffman
> mhoffman@lightlink.com
>
>

  reply	other threads:[~2007-04-15 17:54 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20070410150227.1bac05b5@hyperion.delvare>
2007-04-10 13:56 ` David Hubbard
2007-04-10 15:40 ` Hans de Goede
2007-04-10 15:46   ` David Hubbard
2007-04-10 22:22     ` Rudolf Marek
2007-04-10 23:02       ` David Hubbard
2007-04-11  9:24       ` Hans de Goede
2007-04-11 15:08         ` Juerg Haefliger
     [not found]         ` <461dca480d7ec@wp.pl>
2007-04-12  7:27           ` [lm-sensors] Hardware monitoring subsystem maintainer positionis open Hans de Goede
2007-04-15  2:07             ` Dmitry Torokhov
2007-04-11  9:49   ` Hardware monitoring subsystem maintainer position is open Jean Delvare
2007-04-11 10:06     ` [lm-sensors] " David Hubbard
2007-04-11 14:49     ` Gene Heskett
2007-04-15 15:03 ` [lm-sensors] " Mark M. Hoffman
2007-04-15 17:54   ` Juerg Haefliger [this message]
2007-04-15 18:16   ` Rudolf Marek
2007-04-17  8:45   ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=191fb4ca0704151054n17b1b423i3df50c292a0cb1cf@mail.gmail.com \
    --to=juergh@gmail.com \
    --cc=david.c.hubbard@gmail.com \
    --cc=j.w.r.degoede@hhs.nl \
    --cc=khali@linux-fr.org \
    --cc=krzysztof.h1@wp.pl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=mhoffman@lightlink.com \
    --cc=r.marek@assembler.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®