From: roucaries bastien <roucaries.bastien@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: [BUG] Ali snd soft lookup on 2.6.14 (regression)
Date: Thu, 10 Nov 2005 22:18:36 +0000 [thread overview]
Message-ID: <195c7a900511101418r25aa43e6gc5cdeeac17aa0c7c@mail.gmail.com> (raw)
Recently I upgrade from 2.6.10 to 2.6.14 and I my sound card doesn't
work anymore.
dmesg shows:
BUG: soft lockup detected on CPU#0!
Pid: 3798, comm: modprobe
EIP: 0060:[<dcb09031>] CPU: 0
EIP is at snd_ali_codec_ready+0x31/0x90 [snd_ali5451]
EFLAGS: 00000212 Not tainted (2.6.14-1-686)
EAX: 5374807e EBX: 5374807e ECX: 00008800 EDX: 00008840
ESI: fffbeeb4 EDI: dada6000 EBP: 00000040 DS: 007b ES: 007b
CR0: 8005003b CR2: b7f18000 CR3: 1acf4000 CR4: 000006d0
[<dcb092a8>] snd_ali_codec_peek+0xb8/0xf0 [snd_ali5451]
[<dcb09353>] snd_ali_codec_read+0x23/0x30 [snd_ali5451]
[<dcad9235>] snd_ac97_read+0x35/0x50 [snd_ac97_codec]
[<dcae0c91>] patch_ad1881_chained1+0x71/0x100 [snd_ac97_codec]
[<dcae0e85>] patch_ad1881_chained+0x165/0x1a0 [snd_ac97_codec]
[<dcae1057>] patch_ad1881+0x197/0x1e0 [snd_ac97_codec]
[<dcae13b0>] patch_ad1981b+0x10/0x50 [snd_ac97_codec]
[<dcadc74e>] snd_ac97_mixer+0x2ee/0xc90 [snd_ac97_codec]
[<dca069d4>] snd_info_register+0x34/0xa0 [snd]
[<c01492cf>] kzalloc+0x1f/0x50
[<dca0968d>] snd_device_new+0x1d/0x70 [snd]
[<dcadc338>] snd_ac97_bus+0x78/0xb0 [snd_ac97_codec]
[<dcb0b0cd>] snd_ali_mixer+0xed/0x120 [snd_ali5451]
[<dcb0afc0>] snd_ali_mixer_free_ac97+0x0/0x20 [snd_ali5451]
[<dcb0bbdf>] snd_ali_probe+0xcf/0x170 [snd_ali5451]
[<c01da326>] pci_match_device+0x26/0xc0
[<c01da436>] __pci_device_probe+0x56/0x70
[<c01da47f>] pci_device_probe+0x2f/0x50
[<c0231fa3>] driver_probe_device+0x43/0xd0
[<c02320b0>] __driver_attach+0x0/0x50
[<c02320f1>] __driver_attach+0x41/0x50
[<c02314dd>] bus_for_each_dev+0x5d/0x80
[<c0232125>] driver_attach+0x25/0x30
[<c02320b0>] __driver_attach+0x0/0x50
[<c0231a39>] bus_add_driver+0x89/0xf0
[<c01da6f2>] pci_register_driver+0x62/0x90
[<dca8f00f>] alsa_card_ali_init+0xf/0x11 [snd_ali5451]
[<c01371d1>] sys_init_module+0xc1/0x1a0
[<c01030b5>] syscall_call+0x7/0xb
lspci -v
0000:00:04.0 Multimedia audio controller: ALi Corporation M5451 PCI
AC-Link Controller Audio Device (rev 02)
Subsystem: Sony Corporation: Unknown device 8158
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort-<MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at e0401000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Regards
Bastien
next reply other threads:[~2005-11-10 22:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-10 22:18 roucaries bastien [this message]
2005-11-11 14:06 ` Takashi Iwai
2005-11-11 18:40 ` roucaries bastien
2005-11-11 18:49 ` Takashi Iwai
2005-11-11 19:02 ` roucaries bastien
2005-11-11 19:05 ` Takashi Iwai
2005-11-11 19:49 ` roucaries bastien
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=195c7a900511101418r25aa43e6gc5cdeeac17aa0c7c@mail.gmail.com \
--to=roucaries.bastien@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®