Re: [PATCH v2 3/3] KVM: SEV: Add support for SNP BTB Isolation

[Tom Lendacky <thomas.lendacky@amd.com>]

On 3/11/26 08:06, Kim Phillips wrote:
> This feature ensures SNP guest Branch Target Buffers (BTBs) are not
> affected by context outside that guest.  CPU hardware tracks each
> guest's BTB entries and can flush the BTB if it has been determined
> to be contaminated with any prediction information originating outside
> the particular guest's context.
> 
> To mitigate possible performance penalties incurred by these flushes,
> it is recommended that the hypervisor run with SPEC_CTRL[IBRS] set.
> Note that using Automatic IBRS is not an equivalent option here, since
> it behaves differently when SEV-SNP is active.  See commit acaa4b5c4c85
> ("x86/speculation: Do not enable Automatic IBRS if SEV-SNP is enabled")
> for more details.
> 
> Indicate support for BTB Isolation in sev_supported_vmsa_features,
> bit 7.
> 
> SNP-active guests can enable (BTB) Isolation through SEV_Status
> bit 9 (SNPBTBIsolation).
> 
> For more info, refer to page 615, Section 15.36.17 "Side-Channel
> Protection", AMD64 Architecture Programmer's Manual Volume 2: System
> Programming Part 2, Pub. 24593 Rev. 3.42 - March 2024 (see Link).
> 
> Link: https://bugzilla.kernel.org/attachment.cgi?id=306250
> Signed-off-by: Kim Phillips <kim.phillips@amd.com>
> ---
> v2: No changes
> v1: https://lore.kernel.org/kvm/20260224180157.725159-4-kim.phillips@amd.com/
> 
>  arch/x86/include/asm/svm.h | 1 +
>  arch/x86/kvm/svm/sev.c     | 3 +++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
> index edde36097ddc..2038461c1316 100644
> --- a/arch/x86/include/asm/svm.h
> +++ b/arch/x86/include/asm/svm.h
> @@ -305,6 +305,7 @@ static_assert((X2AVIC_4K_MAX_PHYSICAL_ID & AVIC_PHYSICAL_MAX_INDEX_MASK) == X2AV
>  #define SVM_SEV_FEAT_RESTRICTED_INJECTION		BIT(3)
>  #define SVM_SEV_FEAT_ALTERNATE_INJECTION		BIT(4)
>  #define SVM_SEV_FEAT_DEBUG_SWAP				BIT(5)
> +#define SVM_SEV_FEAT_BTB_ISOLATION			BIT(7)
>  #define SVM_SEV_FEAT_SECURE_TSC				BIT(9)
>  
>  #define VMCB_ALLOWED_SEV_FEATURES_VALID			BIT_ULL(63)
> diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
> index 3f9c1aa39a0a..ac29cf47dd08 100644
> --- a/arch/x86/kvm/svm/sev.c
> +++ b/arch/x86/kvm/svm/sev.c
> @@ -3167,6 +3167,9 @@ void __init sev_hardware_setup(void)
>  
>  	if (sev_snp_enabled && tsc_khz && cpu_feature_enabled(X86_FEATURE_SNP_SECURE_TSC))
>  		sev_supported_vmsa_features |= SVM_SEV_FEAT_SECURE_TSC;
> +
> +	if (sev_snp_enabled)
> +		sev_supported_vmsa_features |= SVM_SEV_FEAT_BTB_ISOLATION;

This would also need to update the SVM_SEV_FEAT_SNP_ONLY_MASK that Sean
suggested/created in the IBPB-On-Entry series.

Thanks,
Tom

>  }
>  
>  void sev_hardware_unsetup(void)