From: Zenghui Yu <yuzenghui@huawei.com>
To: Suzuki K Poulose <suzuki.poulose@arm.com>,
<linux-arm-kernel@lists.infradead.org>
Cc: <kvmarm@lists.cs.columbia.edu>, <kvm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <eric.auger@redhat.com>,
<marc.zyngier@arm.com>, <christoffer.dall@arm.com>,
<zhengxiang9@huawei.com>, <andrew.murray@arm.com>,
<wanghaibin.wang@huawei.com>
Subject: Re: [PATCH] kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP
Date: Tue, 9 Apr 2019 16:05:58 +0800 [thread overview]
Message-ID: <1b398e29-e2d5-2a58-b4ca-c72979a170d8@huawei.com> (raw)
In-Reply-To: <730c25b4-dbc5-8d8b-514c-4ed8641701ce@arm.com>
On 2019/4/9 2:40, Suzuki K Poulose wrote:
> Hi Zenhui,
>
> On 04/08/2019 04:11 PM, Zenghui Yu wrote:
>> Hi Suzuki,
>>
>> Thanks for the reply.
>>
>
> ...
>
>>>> Hi Suzuki,
>>>>
>>>> Why not making use of fault_supports_stage2_huge_mapping()? Let it do
>>>> some checks for us.
>>>>
>>>> fault_supports_stage2_huge_mapping() was intended to do a *two-step*
>>>> check to tell us that can we create stage2 huge block mappings, and
>>>> this
>>>> check is both for hugetlbfs and THP. With commit a80868f398554842b14,
>>>> we pass PAGE_SIZE as "map_size" for normal size pages (which turned out
>>>> to be almost meaningless), and unfortunately the THP check no longer
>>>> works.
>>>
>>> Thats correct.
>>>
>>>>
>>>> So we want to rework *THP* check process. Your patch fixes the first
>>>> checking-step, but the second is still missed, am I wrong?
>>>
>>> It fixes the step explicitly for the THP by making sure that the GPA and
>>> the HVA are aligned to the map size.
>>
>> Yes, I understand how your patch had fixed the issue. But what I'm
>> really concerned about here is the *second* checking-step in
>> fault_supports_stage2_huge_mapping().
>>
>> We have to check if we are mapping a non-block aligned or non-block
>> sized memslot, if so, we can not create block mappings for the beginning
>> and end of this memslot. This is what the second part of
>> fault_supports_stage2_huge_mapping() had done.
>>
>> I haven't seen this checking-step in your patch, did I miss something?
>>
>
> I see.
>
>>> I don't think this calls for a VM_BUG_ON(). It is simply a case where
>>> the GPA is not aligned to HVA, but for normal VMA that could be made
>>> THP.
>>>
>>> We had this VM_BUG_ON(), which would have never hit because we would
>>> have set force_pte if they were not aligned.
>>
>> Yes, I agree.
>>
>>>>> + /* Skip memslots with unaligned IPA and user address */
>>>>> + if ((gfn & mask) != (pfn & mask))
>>>>> + return false;
>>>>> if (pfn & mask) {
>>>>> *ipap &= PMD_MASK;
>>>>> kvm_release_pfn_clean(pfn);
>>>>>
>>>>
>>>> ---8>---
>>>>
>>>> Rework fault_supports_stage2_huge_mapping(), let it check THP again.
>>>>
>>>> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
>>>> ---
>>>> virt/kvm/arm/mmu.c | 11 ++++++++++-
>>>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
>>>> index 27c9583..5e1b258 100644
>>>> --- a/virt/kvm/arm/mmu.c
>>>> +++ b/virt/kvm/arm/mmu.c
>>>> @@ -1632,6 +1632,15 @@ static bool
>>>> fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
>>>> uaddr_end = uaddr_start + size;
>>>>
>>>> /*
>>>> + * If the memslot is _not_ backed by hugetlbfs, then check if it
>>>> + * can be backed by transparent hugepages.
>>>> + *
>>>> + * Currently only PMD_SIZE THPs are supported, revisit it later.
>>>> + */
>>>> + if (map_size == PAGE_SIZE)
>>>> + map_size = PMD_SIZE;
>>>> +
>>>
>>> This looks hackish. What is we support PUD_SIZE huge page in the future
>>> ?
>>
>> Yes, this might make the code a little difficult to understand. But by
>> doing so, we follow the same logic before commit a80868f398554842b14,
>> that said, we do the two-step checking for normal size pages in
>> fault_supports_stage2_huge_mapping(), to decide if we can create THP
>> mappings for these pages.
>>
>> As for PUD_SIZE THPs, to be honest, I have no idea now :(
>
> How about the following diff ?
>
> diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
> index 97b5417..98e5cec 100644
> --- a/virt/kvm/arm/mmu.c
> +++ b/virt/kvm/arm/mmu.c
> @@ -1791,7 +1791,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu,
> phys_addr_t fault_ipa,
> * currently supported. This code will need to be
> * updated to support other THP sizes.
> */
> - if (transparent_hugepage_adjust(&pfn, &fault_ipa))
> + if (fault_supports_stage2_huge_mappings(memslot, hva, PMD_SIZE) &&
> + transparent_hugepage_adjust(&pfn, &fault_ipa))
> vma_pagesize = PMD_SIZE;
> }
I think this is good enough for the issue.
(One minor concern: With this change, it seems that we no longer need
"force_pte" and can just use "logging_active" instead. But this is not
much related to what we're fixing.)
thanks.
next prev parent reply other threads:[~2019-04-09 8:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-02 11:06 Suzuki K Poulose
2019-04-02 15:53 ` Andrew Murray
2019-04-08 3:50 ` Zenghui Yu
2019-04-08 10:35 ` Suzuki K Poulose
2019-04-08 15:11 ` Zenghui Yu
2019-04-08 18:40 ` Suzuki K Poulose
2019-04-09 8:05 ` Zenghui Yu [this message]
2019-04-09 14:59 ` Suzuki K Poulose
2019-04-10 2:20 ` Zenghui Yu
2019-04-10 8:39 ` Suzuki K Poulose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1b398e29-e2d5-2a58-b4ca-c72979a170d8@huawei.com \
--to=yuzenghui@huawei.com \
--cc=andrew.murray@arm.com \
--cc=christoffer.dall@arm.com \
--cc=eric.auger@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=wanghaibin.wang@huawei.com \
--cc=zhengxiang9@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®