From: Peter Rosin <peda@axentia.se>
To: Eddie James <eajames@linux.ibm.com>, linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org, wsa@kernel.org, jic23@kernel.org,
lars@metafoo.de, miltonm@us.ibm.com, joel@jms.id.au,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] iio: si7020: Lock root adapter to wait for reset
Date: Wed, 7 Sep 2022 16:17:14 +0200 [thread overview]
Message-ID: <1ba9cf9d-2980-974f-e9a5-ea53e1915d45@axentia.se> (raw)
In-Reply-To: <c7f6baa3-8181-a612-72cc-23f570f31ab3@linux.ibm.com>
Hi!
2022-09-07 at 15:53, Eddie James wrote:
>
> On 9/7/22 02:10, Peter Rosin wrote:
>> Hi!
>>
>> First off, I'm very sorry for being too busy and too unresponsive.
>>
>> 2022-09-06 at 22:28, Eddie James wrote:
>>> Use the new mux root operations to lock the root adapter while waiting for
>>> the reset to complete. I2C commands issued after the SI7020 is starting up
>>> or after reset can potentially upset the startup sequence. Therefore, the
>>> host needs to wait for the startup sequence to finish before issuing
>>> further I2C commands.
>>>
>>> Signed-off-by: Eddie James <eajames@linux.ibm.com>
>>> ---
>>> drivers/iio/humidity/si7020.c | 16 ++++++++++++++--
>>> 1 file changed, 14 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
>>> index ab6537f136ba..76ca7863f35b 100644
>>> --- a/drivers/iio/humidity/si7020.c
>>> +++ b/drivers/iio/humidity/si7020.c
>>> @@ -106,6 +106,7 @@ static const struct iio_info si7020_info = {
>>> static int si7020_probe(struct i2c_client *client,
>>> const struct i2c_device_id *id)
>>> {
>>> + struct i2c_adapter *root;
>>> struct iio_dev *indio_dev;
>>> struct i2c_client **data;
>>> int ret;
>>> @@ -115,13 +116,24 @@ static int si7020_probe(struct i2c_client *client,
>>> I2C_FUNC_SMBUS_READ_WORD_DATA))
>>> return -EOPNOTSUPP;
>>> + root = i2c_lock_select_bus(client->adapter);
>>> + if (IS_ERR(root))
>>> + return PTR_ERR(root);
>>> +
>>> /* Reset device, loads default settings. */
>>> - ret = i2c_smbus_write_byte(client, SI7020CMD_RESET);
>>> - if (ret < 0)
>>> + ret = __i2c_smbus_xfer(root, client->addr, client->flags,
>>> + I2C_SMBUS_WRITE, SI7020CMD_RESET,
>>> + I2C_SMBUS_BYTE, NULL);
>> I'd say that this is too ugly. We should not add stuff that basically
>> hides the actual xfer from the mux like this. That is too much of a
>> break in the abstraction.
>
>
> Hm, I guess I'm not sure I follow - I see several drivers that use the raw __i2c_smbus_xfer or __i2c_transfer, some without a lock in sight. If it's not acceptable to use the unlocked versions in some cases, why are they exported in the header file?
Doing unlocked xfers w/o manually doing the locking is a bug. If you are
aware of code doing this, please point them out!
Issuing an unlocked xfer on the same adapter that has been manually locked
has been a thing since forever. But issuing that xfer on the root adapter
"behind the back" of e.g. an address translator is simply not going to work
at all if it never sees the xfer and thus never gets a chance to modify it.
A mux might also in theory add quirks or adjust xfers for whatever reason,
and that possibility will be made impossible by hiding the xfer from the
mux.
>
>
>>
>> Looking back, expanding on the previous series [1] so that it installs
>> the hook on the root adapter, handles smbus xfers and clears out the
>> callback afterwards is much more sensible. No?
>
>
> Maybe so, though adding the callback is a more intrusive change, in my opinion, since every transfer has to check if the pointer is null.
The runtime cost will be negligible. The bigger cost is IMO the maintenance
overhead.
Cheers,
Peter
>
>
> Thanks for your feedback!
>
> Eddie
>
>
>
>>
>> Maybe the callback in that series should also include a reference to
>> the xfer that has just been done, so that the hook can potentially
>> discriminate and only do the delay for the key xfer. But maybe that's
>> overkill?
>>
>> Cheers,
>> Peter
>>
>> [1] https://lore.kernel.org/lkml/20220518204119.38943-1-eajames@linux.ibm.com/
>>
>>> + if (ret < 0) {
>>> + i2c_unlock_deselect_bus(client->adapter);
>>> return ret;
>>> + }
>>> +
>>> /* Wait the maximum power-up time after software reset. */
>>> msleep(15);
>>> + i2c_unlock_deselect_bus(client->adapter);
>>> +
>>> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>>> if (!indio_dev)
>>> return -ENOMEM;
next prev parent reply other threads:[~2022-09-07 14:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-06 20:28 [PATCH v2 0/2] i2c: core: Add mux root adapter operations Eddie James
2022-09-06 20:28 ` [PATCH v2 1/2] " Eddie James
2022-09-06 20:28 ` [PATCH v2 2/2] iio: si7020: Lock root adapter to wait for reset Eddie James
2022-09-07 7:10 ` Peter Rosin
2022-09-07 13:53 ` Eddie James
2022-09-07 14:17 ` Peter Rosin [this message]
2022-09-07 16:02 ` Eddie James
2022-09-07 20:58 ` Peter Rosin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ba9cf9d-2980-974f-e9a5-ea53e1915d45@axentia.se \
--to=peda@axentia.se \
--cc=eajames@linux.ibm.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=lars@metafoo.de \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miltonm@us.ibm.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®