mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mimi Zohar <zohar@linux.ibm.com>
To: Yeoreum Yun <yeoreum.yun@arm.com>,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-integrity@vger.kernel.org
Cc: paul@paul-moore.com, roberto.sassu@huaweicloud.com,
	noodles@earth.li, jarkko@kernel.org, sudeep.holla@kernel.org,
	jmorris@namei.org, serge@hallyn.com, dmitry.kasatkin@gmail.com,
	eric.snowberg@oracle.com, jgg@ziepe.ca
Subject: Re: [PATCH v5 2/4] security: ima: introduce IMA_INIT_LATE_SYNC option
Date: Tue, 02 Jun 2026 08:35:52 -0400	[thread overview]
Message-ID: <1cb6e74f1d63bd256d70e5c026234d4535acb662.camel@linux.ibm.com> (raw)
In-Reply-To: <20260601142749.3379697-3-yeoreum.yun@arm.com>

On Mon, 2026-06-01 at 15:27 +0100, Yeoreum Yun wrote:
> To generate the boot_aggregate log in the IMA subsystem with TPM PCR values,
> the TPM driver must be built as built-in and
> must be probed before the IMA subsystem is initialized.
> 
> However, when the TPM device operates over the FF-A protocol using
> the CRB interface, probing fails and returns -EPROBE_DEFER if
> the tpm_crb_ffa device — an FF-A device that provides the communication
> interface to the tpm_crb driver — has not yet been probed.
> 
> To ensure the TPM device operating over the FF-A protocol with
> the CRB interface is probed before IMA initialization,
> the following conditions must be met:
> 
> 1. The corresponding ffa_device must be registered,
>    which is done via ffa_init().
> 
> 2. The tpm_crb_driver must successfully probe this device via
>    tpm_crb_ffa_init().
> 
> 3. The tpm_crb driver using CRB over FF-A can then
>    be probed successfully. (See crb_acpi_add() and
>    tpm_crb_ffa_init() for reference.)
> 
> Unfortunately, ffa_init(), tpm_crb_ffa_init(), and crb_acpi_driver_init() are
> all registered with device_initcall, which means crb_acpi_driver_init() may
> be invoked before ffa_init() and tpm_crb_ffa_init() are completed.
> 
> When this occurs, probing the TPM device is deferred.
> However, the deferred probe can happen after the IMA subsystem
> has already been initialized, since IMA initialization is performed
> during late_initcall, and deferred_probe_initcall() is performed
> at the same level.
> 
> And the similar situation is reported on TPM devices attached on SPI
> bus[0].
> 
> To resolve this, introduce IMA_INIT_LATE_SYNC option to initialise
> IMA at late_inicall_sync so that IMA is initialized with the TPM
> device probed deferred.
> 
> When this option is enabled, modules that access files in the
> initramfs through usermode helper calls such as request_module()
> during initcall must not be built-in. Otherwise, IMA may miss
> measuring those files [1].
> 
> Link: https://lore.kernel.org/all/aYXEepLhUouN5f99@earth.li/ [0]
> Link: https://lore.kernel.org/all/2b3782398cc17ce9d355490a0c42ebce9120a9ae.camel@linux.ibm.com/ [1]
> Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>

Reviewed-by:  Mimi Zohar <zohar@linux.ibm.com>

  reply	other threads:[~2026-06-02 12:36 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-01 14:27 [PATCH v5 0/4] " Yeoreum Yun
2026-06-01 14:27 ` [PATCH v5 1/4] security: lsm: allow LSMs to register for late_initcall_sync init Yeoreum Yun
2026-06-01 14:27 ` [PATCH v5 2/4] security: ima: introduce IMA_INIT_LATE_SYNC option Yeoreum Yun
2026-06-02 12:35   ` Mimi Zohar [this message]
2026-06-02 12:58     ` Yeoreum Yun
2026-06-01 14:27 ` [PATCH v5 3/4] security: ima: rename boot_aggregate when ima is initialised at late_sync Yeoreum Yun
2026-06-02 12:34   ` Mimi Zohar
2026-06-02 12:58     ` Yeoreum Yun
2026-06-01 14:27 ` [PATCH v5 4/4] tpm: tpm_crb_ffa: revert defered_probed when tpm_crb_ffa is built-in Yeoreum Yun
2026-06-02  2:29   ` Jarkko Sakkinen
2026-06-02 12:56     ` Yeoreum Yun
2026-06-02 12:57       ` Yeoreum Yun
2026-06-08  4:01       ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1cb6e74f1d63bd256d70e5c026234d4535acb662.camel@linux.ibm.com \
    --to=zohar@linux.ibm.com \
    --cc=dmitry.kasatkin@gmail.com \
    --cc=eric.snowberg@oracle.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=jmorris@namei.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=noodles@earth.li \
    --cc=paul@paul-moore.com \
    --cc=roberto.sassu@huaweicloud.com \
    --cc=serge@hallyn.com \
    --cc=sudeep.holla@kernel.org \
    --cc=yeoreum.yun@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®