From: Guenter Roeck <linux@roeck-us.net>
To: Mathieu Othacehe <othacehe@gnu.org>
Cc: nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com,
claudiu.beznea@tuxon.dev, wim@linux-watchdog.org,
linux-arm-kernel@lists.infradead.org,
linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] watchdog: sama5d4: readout initial state
Date: Sat, 19 Aug 2023 05:09:17 -0700 [thread overview]
Message-ID: <1cceb853-a844-494a-9f87-bf81159cb6ea@roeck-us.net> (raw)
In-Reply-To: <20230819084726.11037-1-othacehe@gnu.org>
On Sat, Aug 19, 2023 at 10:47:26AM +0200, Mathieu Othacehe wrote:
> Readout the AT91_WDT_MR bit at probe so that it becomes possible to get the
> pre-userspace handler working.
>
> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/sama5d4_wdt.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
> index aeee934ca51b..7d31bb6f6204 100644
> --- a/drivers/watchdog/sama5d4_wdt.c
> +++ b/drivers/watchdog/sama5d4_wdt.c
> @@ -255,6 +255,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
> struct sama5d4_wdt *wdt;
> void __iomem *regs;
> u32 irq = 0;
> + u32 reg;
> int ret;
>
> wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> @@ -305,6 +306,12 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
>
> watchdog_init_timeout(wdd, wdt_timeout, dev);
>
> + reg = wdt_read(wdt, AT91_WDT_MR);
> + if (!(reg & AT91_WDT_WDDIS)) {
> + wdt->mr &= ~AT91_WDT_WDDIS;
> + set_bit(WDOG_HW_RUNNING, &wdd->status);
> + }
> +
> ret = sama5d4_wdt_init(wdt);
> if (ret)
> return ret;
> --
> 2.41.0
>
prev parent reply other threads:[~2023-08-19 12:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-19 8:47 Mathieu Othacehe
2023-08-19 12:09 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1cceb853-a844-494a-9f87-bf81159cb6ea@roeck-us.net \
--to=linux@roeck-us.net \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=othacehe@gnu.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®