From: Anshuman Khandual <anshuman.khandual@arm.com>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Cc: Guo Ren <guoren@kernel.org>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paulburton@kernel.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
Rich Felker <dalias@libc.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Andy Lutomirski <luto@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
Steven Rostedt <rostedt@goodmis.org>,
Mel Gorman <mgorman@suse.de>,
linux-m68k@lists.linux-m68k.org, linux-mips@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH 2/5] mm/vma: Make vma_is_accessible() available for general use
Date: Mon, 17 Feb 2020 14:58:01 +0530 [thread overview]
Message-ID: <1d28a706-3232-2660-f2f2-2faca999a3ff@arm.com> (raw)
In-Reply-To: <1581915833-21984-3-git-send-email-anshuman.khandual@arm.com>
On 02/17/2020 10:33 AM, Anshuman Khandual wrote:
> Lets move vma_is_accessible() helper to include/linux/mm.h which makes it
> available for general use. While here, this replaces all remaining open
> encodings for VMA access check with vma_is_accessible().
>
> Cc: Guo Ren <guoren@kernel.org>
> Cc: Geert Uytterhoeven <geert@linux-m68k.org
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
> Cc: Rich Felker <dalias@libc.org>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: Andy Lutomirski <luto@kernel.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Mel Gorman <mgorman@suse.de>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-m68k@lists.linux-m68k.org
> Cc: linux-mips@vger.kernel.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-sh@vger.kernel.org
> Cc: linux-mm@kvack.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> ---
> arch/csky/mm/fault.c | 2 +-
> arch/m68k/mm/fault.c | 2 +-
> arch/mips/mm/fault.c | 2 +-
> arch/powerpc/mm/fault.c | 2 +-
> arch/sh/mm/fault.c | 2 +-
> arch/x86/mm/fault.c | 2 +-
> include/linux/mm.h | 5 +++++
> kernel/sched/fair.c | 2 +-
> mm/gup.c | 2 +-
> mm/memory.c | 5 -----
> mm/mempolicy.c | 3 +--
> 11 files changed, 14 insertions(+), 15 deletions(-)
There are couple of places in mm/mmap.c which could use vma_is_accessible()
as well. Probably missed them, as the order of the VMA flags were different.
Will fold the following changes next time around.
diff --git a/mm/mmap.c b/mm/mmap.c
index 6756b8bb0033..9b9bb4031fd4 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2338,8 +2338,7 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address)
gap_addr = TASK_SIZE;
next = vma->vm_next;
- if (next && next->vm_start < gap_addr &&
- (next->vm_flags & (VM_WRITE|VM_READ|VM_EXEC))) {
+ if (next && next->vm_start < gap_addr && vma_is_accessible(next)) {
if (!(next->vm_flags & VM_GROWSUP))
return -ENOMEM;
/* Check that both stack segments have the same anon_vma? */
@@ -2420,7 +2419,7 @@ int expand_downwards(struct vm_area_struct *vma,
prev = vma->vm_prev;
/* Check that both stack segments have the same anon_vma? */
if (prev && !(prev->vm_flags & VM_GROWSDOWN) &&
- (prev->vm_flags & (VM_WRITE|VM_READ|VM_EXEC))) {
+ vma_is_accessible(prev)) {
if (address - prev->vm_end < stack_guard_gap)
return -ENOMEM;
}
next prev parent reply other threads:[~2020-02-17 9:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-17 5:03 [PATCH 0/5] mm/vma: Use available wrappers when possible Anshuman Khandual
2020-02-17 5:03 ` [PATCH 1/5] mm/vma: Add missing VMA flag readable name for VM_SYNC Anshuman Khandual
2020-02-17 5:03 ` [PATCH 2/5] mm/vma: Make vma_is_accessible() available for general use Anshuman Khandual
2020-02-17 7:36 ` Geert Uytterhoeven
2020-02-17 9:28 ` Anshuman Khandual [this message]
2020-02-18 2:21 ` Guo Ren
2020-02-17 5:03 ` [PATCH 3/5] mm/vma: Replace all remaining open encodings with is_vm_hugetlb_page() Anshuman Khandual
2020-02-17 9:21 ` Anshuman Khandual
2020-02-19 1:14 ` kbuild test robot
2020-02-24 2:21 ` Anshuman Khandual
2020-02-17 5:03 ` [PATCH 4/5] mm/vma: Replace all remaining open encodings with vma_set_anonymous() Anshuman Khandual
2020-02-17 10:27 ` Kirill A. Shutemov
2020-02-17 11:56 ` Anshuman Khandual
2020-03-18 10:24 ` Greg Kroah-Hartman
2020-03-18 10:41 ` Anshuman Khandual
2020-02-17 5:03 ` [PATCH 5/5] mm/vma: Replace all remaining open encodings with vma_is_anonymous() Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1d28a706-3232-2660-f2f2-2faca999a3ff@arm.com \
--to=anshuman.khandual@arm.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=dalias@libc.org \
--cc=dave.hansen@linux.intel.com \
--cc=geert@linux-m68k.org \
--cc=guoren@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-sh@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=luto@kernel.org \
--cc=mgorman@suse.de \
--cc=mingo@redhat.com \
--cc=mpe@ellerman.id.au \
--cc=paulburton@kernel.org \
--cc=paulus@samba.org \
--cc=peterz@infradead.org \
--cc=ralf@linux-mips.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®