Re: [PATCH v1 1/1] hp-wmi: Setting thermal profile fails with 0x06

[Hans de Goede <hdegoede@redhat.com>]

Hi Jorge,

On 9/6/22 19:02, Jorge Lopez wrote:
> Error 0x06 (invalid command parameter) is reported by hp-wmi module
> when reading the current thermal profile and then proceed to set it
> back. The failing condition occurs in Linux NixOS after user
> configures the thermal profile to ‘quiet mode’ in Windows.  Quiet Fan
> Mode is supported in Windows but was not supported in hp-wmi module.
> 
> This fix adds support for PLATFORM_PROFILE_QUIET in hp-wmi module for
> HP notebooks other than HP Omen series.  Quiet thermal profile is not
> supported in HP Omen series notebooks.
> 
> Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>

Thank you for looking into this!



> 
> ---
> Based on the latest platform-drivers-x86.git/for-next
> ---
>  drivers/platform/x86/hp-wmi.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
> index bc7020e9df9e..f5c13df35af0 100644
> --- a/drivers/platform/x86/hp-wmi.c
> +++ b/drivers/platform/x86/hp-wmi.c
> @@ -177,7 +177,8 @@ enum hp_thermal_profile_omen_v1 {
>  enum hp_thermal_profile {
>  	HP_THERMAL_PROFILE_PERFORMANCE	= 0x00,
>  	HP_THERMAL_PROFILE_DEFAULT		= 0x01,
> -	HP_THERMAL_PROFILE_COOL			= 0x02
> +	HP_THERMAL_PROFILE_COOL			= 0x02,
> +	HP_THERMAL_PROFILE_QUIET		= 0x03,
>  };
>  
>  #define IS_HWBLOCKED(x) ((x & HPWMI_POWER_FW_OR_HW) != HPWMI_POWER_FW_OR_HW)
> @@ -1194,6 +1195,9 @@ static int hp_wmi_platform_profile_get(struct platform_profile_handler *pprof,
>  	case HP_THERMAL_PROFILE_COOL:
>  		*profile =  PLATFORM_PROFILE_COOL;
>  		break;
> +	case HP_THERMAL_PROFILE_QUIET:
> +		*profile = PLATFORM_PROFILE_QUIET;
> +		break;
>  	default:
>  		return -EINVAL;
>  	}
> @@ -1216,6 +1220,10 @@ static int hp_wmi_platform_profile_set(struct platform_profile_handler *pprof,
>  	case PLATFORM_PROFILE_COOL:
>  		tp =  HP_THERMAL_PROFILE_COOL;
>  		break;
> +	case PLATFORM_PROFILE_QUIET:
> +		tp = HP_THERMAL_PROFILE_QUIET;
> +		break;
> +
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -1266,6 +1274,7 @@ static int thermal_profile_setup(void)
>  	}
>  
>  	set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
> +	set_bit(PLATFORM_PROFILE_QUIET, platform_profile_handler.choices);

In the commit msg you say that quiet profile is only supported on the non Omen
models, should this then not be inside the else branch of the:

if (is_omen_thermal_profile()) { ... } else { ... }

just above this code block ?

>  	set_bit(PLATFORM_PROFILE_BALANCED, platform_profile_handler.choices);
>  	set_bit(PLATFORM_PROFILE_PERFORMANCE, platform_profile_handler.choices);
>  


Regards,

Hans