mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>,
	jic23@kernel.org, robh+dt@kernel.org, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v7 2/4] dt-bindings:iio:frequency: add admv1014 binding
Date: Mon, 14 Feb 2022 22:41:15 +0100	[thread overview]
Message-ID: <1dff6f62-88dd-00e9-c9c0-bc148f4fb0b1@canonical.com> (raw)
In-Reply-To: <20220214073418.4528-2-antoniu.miclaus@analog.com>

On 14/02/2022 08:34, Antoniu Miclaus wrote:
> Add device tree bindings for the ADMV1014 Upconverter.

Add spaces in subject after ':'.

> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> changes in v7:
>  - add Reviewed-by tag
>  .../bindings/iio/frequency/adi,admv1014.yaml  | 137 ++++++++++++++++++
>  1 file changed, 137 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
> new file mode 100644
> index 000000000000..fe352c01dd94
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADMV1014 Microwave Downconverter
> +
> +maintainers:
> +  - Antoniu Miclaus <antoniu.miclaus@analog.com>
> +
> +description: |
> +   Wideband, microwave downconverter optimized for point to point microwave
> +   radio designs operating in the 24 GHz to 44 GHz frequency range.
> +
> +   https://www.analog.com/en/products/admv1014.html
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,admv1014
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    maximum: 1000000
> +
> +  clocks:
> +    minItems: 1

maxItems: 1
... or do you expect more clocks?

> +
> +  clock-names:
> +    items:
> +      - const: lo_in
> +    description:
> +      External clock that provides the Local Oscilator input.
> +
> +  vcm-supply:
> +    description:
> +      Common-mode voltage regulator.
> +
> +  vcc-if-bb-supply:
> +    description:
> +      BB and IF supply voltage regulator.
> +
> +  vcc-vga-supply:
> +    description:
> +      RF Amplifier supply voltage regulator.
> +
> +  vcc-vva-supply:
> +    description:
> +      VVA Control Circuit supply voltage regulator.
> +
> +  vcc-lna-3p3-supply:
> +    description:
> +      Low Noise Amplifier 3.3V supply voltage regulator.
> +
> +  vcc-lna-1p5-supply:
> +    description:
> +      Low Noise Amplifier 1.5V supply voltage regulator.
> +
> +  vcc-bg-supply:
> +    description:
> +      Band Gap Circuit supply voltage regulator.
> +
> +  vcc-quad-supply:
> +    description:
> +      Quadruple supply voltage regulator.
> +
> +  vcc-mixer-supply:
> +    description:
> +      Mixer supply voltage regulator.
> +
> +  adi,input-mode:
> +    description:
> +      Select the input mode.
> +      iq - in-phase quadrature (I/Q) input
> +      if - complex intermediate frequency (IF) input
> +    enum: [iq, if]
> +
> +  adi,detector-enable:
> +    description:
> +      Digital Rx Detector Enable. The Square Law Detector output is
> +      available at output pin VDET.
> +    type: boolean
> +
> +  adi,p1db-compensation-enable:
> +    description:
> +      Turn on bits to optimize P1dB.
> +    type: boolean
> +
> +  adi,quad-se-mode:
> +    description:
> +      Switch the LO path from differential to single-ended operation.
> +      se-neg - Single-Ended Mode, Negative Side Disabled.
> +      se-pos - Single-Ended Mode, Positive Side Disabled.
> +      diff - Differential Mode.
> +    enum: [se-neg, se-pos, diff]
> +
> +  '#clock-cells':
> +    const: 0

Is this really a clock provider?

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - vcm-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      admv1014@0{

Generic node name (see Devicetree spec), so a "converter"? "wifi"?
"sensor"? "radio"?

> +        compatible = "adi,admv1014";
> +        reg = <0>;
> +        spi-max-frequency = <1000000>;
> +        clocks = <&admv1014_lo>;
> +        clock-names = "lo_in";
> +        vcm-supply = <&vcm>;
> +        vcc-if-bb-supply = <&vcc_if_bb>;
> +        vcc-vga-supply = <&vcc_vga>;
> +        vcc-vva-supply = <&vcc_vva>;
> +        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
> +        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
> +        vcc-bg-supply = <&vcc_bg>;
> +        vcc-quad-supply = <&vcc_quad>;
> +        vcc-mixer-supply = <&vcc_mixer>;
> +        adi,quad-se-mode = "diff";
> +        adi,detector-enable;
> +        adi,p1db-compensation-enable;
> +      };
> +    };
> +...


Best regards,
Krzysztof

  reply	other threads:[~2022-02-14 21:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-14  7:34 [PATCH v7 1/4] iio:frequency:admv1014: add support for ADMV1014 Antoniu Miclaus
2022-02-14  7:34 ` [PATCH v7 2/4] dt-bindings:iio:frequency: add admv1014 binding Antoniu Miclaus
2022-02-14 21:41   ` Krzysztof Kozlowski [this message]
2022-02-14  7:34 ` [PATCH v7 3/4] Documentation:ABI:testing:admv1014: add ABI docs Antoniu Miclaus
2022-02-14  7:34 ` [PATCH v7 4/4] MAINTAINERS: add maintainer for ADMV1014 driver Antoniu Miclaus
2022-02-14 21:37 ` [PATCH v7 1/4] iio:frequency:admv1014: add support for ADMV1014 Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1dff6f62-88dd-00e9-c9c0-bc148f4fb0b1@canonical.com \
    --to=krzysztof.kozlowski@canonical.com \
    --cc=antoniu.miclaus@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®