From: Andre Przywara <andre.przywara@arm.com>
To: Debbie Horsfall <debbie.horsfall@arm.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liviu Dudau <liviu.dudau@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Linus Walleij <linusw@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] arm64: dts: zena: Add support for Zena CSS
Date: Mon, 2 Mar 2026 17:40:41 +0100 [thread overview]
Message-ID: <1e2db927-6ffd-40a1-9ff5-6713631e989b@arm.com> (raw)
In-Reply-To: <20260212-zena-css-v2-2-d33ea23cb9c2@arm.com>
Hi Debbie,
On 2/12/26 12:16, Debbie Horsfall wrote:
> Introduce the Zena CSS Fixed Virtual Platform (FVP) dts. This is
> currently the only Zena CSS variant, however the common definitions are
> included in a common dtsi for extensibility.
Many thanks for the changes! I can confirm that the concerns I had on v1
have all been addressed. The other changes you did are indeed
cosmetical: upper case/lower case conversions, and moving of nodes and
properties. Thanks for addressing those coding style issues proactively!
I checked the CPU nodes again: they match each other apart from the
obvious differences due to the MPIDRs and cluster/cache numbers.
Also the rest looks as reasonable as one could expect.
> Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Cheers,
Andre
> ---
> arch/arm64/boot/dts/arm/Makefile | 1 +
> arch/arm64/boot/dts/arm/zena-css-fvp.dts | 55 +++
> arch/arm64/boot/dts/arm/zena-css.dtsi | 777 +++++++++++++++++++++++++++++++
> 3 files changed, 833 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
> index f30ee045dc95..770fb145b4a9 100644
> --- a/arch/arm64/boot/dts/arm/Makefile
> +++ b/arch/arm64/boot/dts/arm/Makefile
> @@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
> dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
> dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
> dtb-$(CONFIG_ARCH_VEXPRESS) += morello-sdp.dtb morello-fvp.dtb
> +dtb-$(CONFIG_ARCH_VEXPRESS) += zena-css-fvp.dtb
> diff --git a/arch/arm64/boot/dts/arm/zena-css-fvp.dts b/arch/arm64/boot/dts/arm/zena-css-fvp.dts
> new file mode 100644
> index 000000000000..b75204a91882
> --- /dev/null
> +++ b/arch/arm64/boot/dts/arm/zena-css-fvp.dts
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2025, Arm Limited. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "zena-css.dtsi"
> +
> +/ {
> + model = "Zena CSS Fixed Virtual Platform";
> + compatible = "arm,zena-css-fvp", "arm,zena-css", "arm,vexpress";
> +
> + chosen {
> + stdout-path = &soc_serial0;
> + };
> +};
> +
> +&soc {
> + virtio@30020000 {
> + compatible = "virtio,mmio";
> + reg = <0x0 0x30020000 0x0 0x10000>;
> + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + virtio@30030000 {
> + compatible = "virtio,mmio";
> + reg = <0x0 0x30030000 0x0 0x10000>;
> + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + virtio@30040000 {
> + compatible = "virtio,mmio";
> + reg = <0x0 0x30040000 0x0 0x10000>;
> + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + virtio@30050000 {
> + compatible = "virtio,mmio";
> + reg = <0x0 0x30050000 0x0 0x10000>;
> + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + virtio@30060000 {
> + compatible = "virtio,mmio";
> + reg = <0x0 0x30060000 0x0 0x10000>;
> + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + virtio@30080000 {
> + compatible = "virtio,mmio";
> + reg = <0x0 0x30080000 0x0 0x10000>;
> + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/arm/zena-css.dtsi b/arch/arm64/boot/dts/arm/zena-css.dtsi
> new file mode 100644
> index 000000000000..9899d2883337
> --- /dev/null
> +++ b/arch/arm64/boot/dts/arm/zena-css.dtsi
> @@ -0,0 +1,777 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2025, Arm Limited. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> +
> + soc_clk24mhz: clock-24000000 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + clock-output-names = "refclk24mhz";
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + /*
> + * The latency and residency numbers below are for illustrative
> + * purposes only and may vary on actual silicon. These values are
> + * considered just to demonstrate that the cpuidle governor logic
> + * works.
> + */
> + idle-states {
> + entry-method = "psci";
> +
> + cpu_sleep: cpu-sleep {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x10000>;
> + entry-latency-us = <800>;
> + exit-latency-us = <3200>;
> + local-timer-stop;
> + min-residency-us = <4200>;
> + };
> +
> + cluster_sleep: cluster-sleep {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x1010000>;
> + entry-latency-us = <1000>;
> + exit-latency-us = <3200>;
> + local-timer-stop;
> + min-residency-us = <4500>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 { cpu = <&cpu0>; };
> + core1 { cpu = <&cpu1>; };
> + core2 { cpu = <&cpu2>; };
> + core3 { cpu = <&cpu3>; };
> + };
> +
> + cluster1 {
> + core0 { cpu = <&cpu4>; };
> + core1 { cpu = <&cpu5>; };
> + core2 { cpu = <&cpu6>; };
> + core3 { cpu = <&cpu7>; };
> + };
> +
> + cluster2 {
> + core0 { cpu = <&cpu8>; };
> + core1 { cpu = <&cpu9>; };
> + core2 { cpu = <&cpu10>; };
> + core3 { cpu = <&cpu11>; };
> + };
> +
> + cluster3 {
> + core0 { cpu = <&cpu12>; };
> + core1 { cpu = <&cpu13>; };
> + core2 { cpu = <&cpu14>; };
> + core3 { cpu = <&cpu15>; };
> + };
> + };
> +
> + cpu0: cpu@0 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x0000>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl0_l2_0>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl0_l2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl0_l3>;
> + };
> + };
> +
> + cpu1: cpu@100 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x0100>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl0_l2_1>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl0_l2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl0_l3>;
> + };
> + };
> +
> + cpu2: cpu@200 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x0200>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl0_l2_2>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl0_l2_2: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl0_l3>;
> + };
> + };
> +
> + cpu3: cpu@300 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x0300>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl0_l2_3>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl0_l2_3: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl0_l3>;
> + };
> + };
> +
> + cpu4: cpu@10000 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x10000>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl1_l2_0>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl1_l2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl1_l3>;
> + };
> + };
> +
> + cpu5: cpu@10100 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x10100>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl1_l2_1>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl1_l2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl1_l3>;
> + };
> + };
> +
> + cpu6: cpu@10200 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x10200>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl1_l2_2>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl1_l2_2: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl1_l3>;
> + };
> + };
> +
> + cpu7: cpu@10300 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x10300>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl1_l2_3>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl1_l2_3: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl1_l3>;
> + };
> + };
> +
> + cpu8: cpu@20000 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x20000>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl2_l2_0>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl2_l2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl2_l3>;
> + };
> + };
> +
> + cpu9: cpu@20100 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x20100>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl2_l2_1>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl2_l2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl2_l3>;
> + };
> + };
> +
> + cpu10: cpu@20200 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x20200>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl2_l2_2>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl2_l2_2: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl2_l3>;
> + };
> + };
> +
> + cpu11: cpu@20300 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x20300>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl2_l2_3>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl2_l2_3: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl2_l3>;
> + };
> + };
> +
> + cpu12: cpu@30000 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x30000>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl3_l2_0>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl3_l2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl3_l3>;
> + };
> + };
> +
> + cpu13: cpu@30100 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x30100>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl3_l2_1>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl3_l2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl3_l3>;
> + };
> + };
> +
> + cpu14: cpu@30200 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x30200>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl3_l2_2>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl3_l2_2: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl3_l3>;
> + };
> + };
> +
> + cpu15: cpu@30300 {
> + compatible = "arm,cortex-a720ae";
> + device_type = "cpu";
> + reg = <0x00 0x30300>;
> + enable-method = "psci";
> +
> + clocks = <&scmi_dvfs 0>;
> + cpu-idle-states = <&cpu_sleep &cluster_sleep>;
> + next-level-cache = <&cl3_l2_3>;
> +
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + i-cache-size = <0x10000>;
> +
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + d-cache-size = <0x10000>;
> +
> + cl3_l2_3: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-line-size = <64>;
> + cache-sets = <0x400>; /* 8-way set */
> + cache-size = <0x80000>; /* 512KB */
> + cache-unified;
> + next-level-cache = <&cl3_l3>;
> + };
> + };
> +
> + cl0_l3: l3-cache0 {
> + compatible = "cache";
> + cache-level = <3>;
> + cache-line-size = <64>;
> + cache-sets = <0x1000>; /* 16-way set */
> + cache-size = <0x400000>; /* 4MB */
> + cache-unified;
> + };
> +
> + cl1_l3: l3-cache1 {
> + compatible = "cache";
> + cache-level = <3>;
> + cache-line-size = <64>;
> + cache-sets = <0x1000>; /* 16-way set */
> + cache-size = <0x400000>; /* 4MB */
> + cache-unified;
> + };
> +
> + cl2_l3: l3-cache2 {
> + compatible = "cache";
> + cache-level = <3>;
> + cache-line-size = <64>;
> + cache-sets = <0x1000>; /* 16-way set */
> + cache-size = <0x400000>; /* 4MB */
> + cache-unified;
> + };
> +
> + cl3_l3: l3-cache3 {
> + compatible = "cache";
> + cache-level = <3>;
> + cache-line-size = <64>;
> + cache-sets = <0x1000>; /* 16-way set */
> + cache-size = <0x400000>; /* 4MB */
> + cache-unified;
> + };
> + };
> +
> + firmware {
> + scmi {
> + compatible = "arm,scmi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mbox-names = "tx", "tx_reply", "rx";
> + mboxes = <&mbox_db_tx 0 0 0>,
> + <&mbox_db_rx 0 0 0>,
> + <&mbox_db_rx 0 0 2>;
> + shmem = <&scmi_shmem_tx &scmi_shmem_rx>;
> +
> + scmi_dvfs: protocol@13 {
> + reg = <0x13>;
> + #clock-cells = <1>;
> + };
> + };
> + };
> +
> + dsu-pmu-0 {
> + compatible = "arm,dsu-pmu";
> + cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + dsu-pmu-1 {
> + compatible = "arm,dsu-pmu";
> + cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
> + interrupts = <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + dsu-pmu-2 {
> + compatible = "arm,dsu-pmu";
> + cpus = <&cpu8 &cpu9 &cpu10 &cpu11>;
> + interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + dsu-pmu-3 {
> + compatible = "arm,dsu-pmu";
> + cpus = <&cpu12 &cpu13 &cpu14 &cpu15>;
> + interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0", "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + timer@1a810000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0 0x1a810000 0x0 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + /*
> + * Map child space [0x0..0x30000) to parent @ 0x1a810000
> + */
> + ranges = <0x0 0x0 0x1a810000 0x00030000>;
> +
> + frame@20000 {
> + reg = <0x20000 0x10000>;
> + frame-number = <0>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + gic: interrupt-controller@20800000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #redistributor-regions = <16>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + ranges;
> +
> + /*
> + * With GIC-A720AE multiview enabled, GICR_TYPER.Last is
> + * always reported as 1 on redistributor views other than
> + * view 0. This breaks discovery of a single contiguous
> + * GICR frame region, so each core is described with its own
> + * redistributor region.
> + */
> + reg = <0x0 0x20800000 0x0 0x10000>, /* GICD */
> + <0x0 0x20880000 0x0 0x40000>, /* 16 * GICR */
> + <0x0 0x208c0000 0x0 0x40000>,
> + <0x0 0x20900000 0x0 0x40000>,
> + <0x0 0x20940000 0x0 0x40000>,
> + <0x0 0x20980000 0x0 0x40000>,
> + <0x0 0x209c0000 0x0 0x40000>,
> + <0x0 0x20a00000 0x0 0x40000>,
> + <0x0 0x20a40000 0x0 0x40000>,
> + <0x0 0x20a80000 0x0 0x40000>,
> + <0x0 0x20ac0000 0x0 0x40000>,
> + <0x0 0x20b00000 0x0 0x40000>,
> + <0x0 0x20b40000 0x0 0x40000>,
> + <0x0 0x20b80000 0x0 0x40000>,
> + <0x0 0x20bc0000 0x0 0x40000>,
> + <0x0 0x20c00000 0x0 0x40000>,
> + <0x0 0x20c40000 0x0 0x40000>;
> +
> + its: msi-controller@20840000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x0 0x20840000 0x0 0x40000>;
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + /*
> + * UART is fixed at 24MHz, both UARTCLK and PCLK.
> + */
> + soc_serial0: serial@1a400000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x0 0x1a400000 0x0 0x10000>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&soc_clk24mhz>, <&soc_clk24mhz>;
> + clock-names = "uartclk", "apb_pclk";
> + };
> +
> + watchdog@1a420000 {
> + compatible = "arm,sbsa-gwdt";
> + reg = <0x0 0x1a420000 0x0 0x10000>,
> + <0x0 0x1a430000 0x0 0x10000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + rtc@300d0000 {
> + compatible = "arm,pl031", "arm,primecell";
> + reg = <0x0 0x300d0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&soc_clk24mhz>;
> + clock-names = "apb_pclk";
> + };
> +
> + mbox_db_tx: mailbox@40020000 {
> + compatible = "arm,mhuv3";
> + reg = <0x0 0x40020000 0x0 0x30000>;
> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "combined";
> + clocks = <&soc_clk24mhz>;
> + #mbox-cells = <3>;
> + };
> +
> + mbox_db_rx: mailbox@40060000 {
> + compatible = "arm,mhuv3";
> + reg = <0x0 0x40060000 0x0 0x30000>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "combined";
> + clocks = <&soc_clk24mhz>;
> + #mbox-cells = <3>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + sram: sram@104000 {
> + compatible = "mmio-sram";
> + reg = <0x0 0x00104000 0x0 0x00001000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0x00104000 0x00001000>;
> +
> + scmi_shmem_tx: scpshmem-sram-section@0 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x0 0x100>;
> + };
> +
> + scmi_shmem_rx: scpshmem-sram-section@100 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x100 0x100>;
> + };
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> +
> + /* ~2GB mapped at 2GB, another 2GB at 2TB */
> + reg = <0x00000000 0x80000000 0x00000000 0x7f000000>,
> + <0x00000200 0x00000000 0x00000000 0x80000000>;
> + };
> +};
>
next prev parent reply other threads:[~2026-03-02 16:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-12 11:16 [PATCH v2 0/2] Add Arm Zena CSS support Debbie Horsfall
2026-02-12 11:16 ` [PATCH v2 1/2] dt-bindings: arm: Add Zena CSS compatibility Debbie Horsfall
2026-02-12 11:16 ` [PATCH v2 2/2] arm64: dts: zena: Add support for Zena CSS Debbie Horsfall
2026-03-02 16:40 ` Andre Przywara [this message]
2026-03-08 15:41 ` Krzysztof Kozlowski
2026-03-09 9:20 ` Sudeep Holla
2026-03-08 12:45 ` [PATCH v2 0/2] Add Arm Zena CSS support Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1e2db927-6ffd-40a1-9ff5-6713631e989b@arm.com \
--to=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=debbie.horsfall@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liviu.dudau@arm.com \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®