+ more people.

On Thu, 1 Oct 2026, Daniel Lezcano wrote:

> Tie the keyboard thermal mitigation temperature to the platform profile
> selected through the ThinkPad embedded controller.
> 
> The EC reports Fn+L, Fn+M and Fn+H events corresponding to low-power,
> balanced and performance operating modes. Use these events to update the
> passive trip point of the "keyboard-thermal" zone to 49.85°C, 57.85°C
> and 59.85°C respectively.
> 
> These thresholds match the thermal mitigation temperatures used by the
> platform for the corresponding operating profiles.
> 
> Look up the keyboard thermal zone at probe time and locate the passive
> trip named "keyboard-ec-alert". The trip name is used deliberately so
> the EC driver can identify the device-tree trip associated with the
> platform thermal profile without depending on its position in the trip
> table.
> 
> Initialize the thermal mitigation threshold to the balanced profile,
> matching the default platform behaviour, and update the thermal zone
> whenever a profile change event is reported by the EC so that the new
> mitigation temperature takes effect immediately.
> 
> Using the platform_profile API would provide a more appropriate interface
> for exposing and managing these operating modes. However, while the API
> itself is generic, the platform profile core implementation currently
> lives under the ACPI framework. Making it available to device-tree based
> platforms requires separating the generic infrastructure from ACPI,
> which is a larger and independent piece of work.

So the only problem is that platform profile resides underneath acpi 
namespace in sysfs?

--
 i.

> For now, handle the EC profile events directly and use them to adjust the
> thermal mitigation threshold while keeping the thermal policy described
> in the device tree.
> 
> This change depends on the keyboard thermal zone and the
> "keyboard-ec-alert" trip introduced by the following series.
> 
> Link: https://lore.kernel.org/all/20261001181055.9149-1-daniel.lezcano@oss.qualcomm.com/
> Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
> ---
>  drivers/platform/arm64/lenovo-thinkpad-t14s.c | 109 ++++++++++++++++++
>  1 file changed, 109 insertions(+)
> 
> diff --git a/drivers/platform/arm64/lenovo-thinkpad-t14s.c b/drivers/platform/arm64/lenovo-thinkpad-t14s.c
> index e7acb66b77f2..ee39b0382219 100644
> --- a/drivers/platform/arm64/lenovo-thinkpad-t14s.c
> +++ b/drivers/platform/arm64/lenovo-thinkpad-t14s.c
> @@ -18,8 +18,10 @@
>  #include <linux/leds.h>
>  #include <linux/lockdep.h>
>  #include <linux/module.h>
> +#include <linux/platform_profile.h>
>  #include <linux/regmap.h>
>  #include <linux/slab.h>
> +#include <linux/thermal.h>
>  #include <linux/pm.h>
>  
>  #define T14S_EC_CMD_ECRD	0x02
> @@ -93,9 +95,16 @@ struct t14s_ec_led_classdev {
>  	struct t14s_ec *ec;
>  };
>  
> +struct t14s_ec_thermal_profile {
> +	struct thermal_zone_device *tzd;
> +	struct thermal_trip *keyboard_alert;
> +	enum platform_profile_option current_profile;
> +};
> +
>  struct t14s_ec {
>  	struct regmap *regmap;
>  	struct device *dev;
> +	struct t14s_ec_thermal_profile profile;
>  	struct t14s_ec_led_classdev led_pwr_btn;
>  	struct t14s_ec_led_classdev led_chrg_orange;
>  	struct t14s_ec_led_classdev led_chrg_white;
> @@ -472,6 +481,99 @@ static int t14s_input_probe(struct t14s_ec *ec)
>  	return input_register_device(ec->inputdev);
>  }
>  
> +static int t14s_platform_profile_temp(enum platform_profile_option profile)
> +{
> +	/*
> +	 * These thresholds match the temperatures used by the
> +	 * platform firmware for the corresponding operating profiles.
> +	 */
> +	switch (profile) {
> +	case PLATFORM_PROFILE_LOW_POWER:
> +		return 49850;
> +	case PLATFORM_PROFILE_BALANCED:
> +		return 57850;
> +	case PLATFORM_PROFILE_PERFORMANCE:
> +		return 59850;
> +	default:
> +		return THERMAL_TEMP_INVALID;
> +	}
> +}
> +
> +static int t14s_platform_profile_set(struct t14s_ec_thermal_profile *tp,
> +				     enum platform_profile_option profile)
> +{
> +	int temp;
> +
> +	if (!tp->tzd)
> +		return -ENODEV;
> +
> +	if (tp->current_profile == profile)
> +		return 0;
> +
> +	temp = t14s_platform_profile_temp(profile);
> +	if (temp == THERMAL_TEMP_INVALID)
> +		return -EINVAL;
> +
> +	thermal_zone_set_trip_temp(tp->tzd, tp->keyboard_alert, temp);
> +	thermal_zone_device_update(tp->tzd, THERMAL_TRIP_CHANGED);
> +
> +	tp->current_profile = profile;
> +
> +	return 0;
> +}
> +
> +static int t14s_profile_find_keyboard_alert(struct thermal_trip *tt, void *data)
> +{
> +	struct device_node *np;
> +	struct t14s_ec_thermal_profile *tp = data;
> +
> +	if (tt->type != THERMAL_TRIP_PASSIVE)
> +		return 0;
> +
> +	np = tt->priv;
> +
> +	if (!np)
> +		return -EINVAL;
> +
> +	if (!of_node_name_eq(np, "keyboard-ec-alert"))
> +		return 0;
> +
> +	tp->keyboard_alert = tt;
> +
> +	return 1;
> +}
> +
> +static int t14s_profile_probe(struct t14s_ec_thermal_profile *tp)
> +{
> +	struct thermal_zone_device *tzd;
> +	int ret;
> +
> +	tzd = thermal_zone_get_zone_by_name("keyboard-thermal");
> +	if (IS_ERR(tzd)) {
> +		ret = PTR_ERR(tzd);
> +
> +		if (ret == -ENODEV)
> +			return -EPROBE_DEFER;
> +
> +		return ret;
> +	}
> +
> +	tp->tzd = tzd;
> +
> +	ret = thermal_zone_for_each_trip(tzd, t14s_profile_find_keyboard_alert, tp);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (!tp->keyboard_alert)
> +		return -ENODEV;
> +
> +	ret = t14s_platform_profile_set(tp, PLATFORM_PROFILE_BALANCED);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
>  static irqreturn_t t14s_ec_irq_handler(int irq, void *data)
>  {
>  	struct t14s_ec *ec = data;
> @@ -534,12 +636,15 @@ static irqreturn_t t14s_ec_irq_handler(int irq, void *data)
>  		break;
>  	case T14S_EC_EVT_KEY_FN_L:
>  		dev_dbg(ec->dev, "FN + L - low performance mode\n");
> +		t14s_platform_profile_set(&ec->profile, PLATFORM_PROFILE_LOW_POWER);
>  		break;
>  	case T14S_EC_EVT_KEY_FN_M:
>  		dev_dbg(ec->dev, "FN + M - medium performance mode\n");
> +		t14s_platform_profile_set(&ec->profile, PLATFORM_PROFILE_BALANCED);
>  		break;
>  	case T14S_EC_EVT_KEY_FN_H:
>  		dev_dbg(ec->dev, "FN + H - high performance mode\n");
> +		t14s_platform_profile_set(&ec->profile, PLATFORM_PROFILE_PERFORMANCE);
>  		break;
>  	case T14S_EC_EVT_KEY_FN_T:
>  		dev_dbg(ec->dev, "FN + T - toggle intelligent cooling mode\n");
> @@ -590,6 +695,10 @@ static int t14s_ec_probe(struct i2c_client *client)
>  	if (ret < 0)
>  		return ret;
>  
> +	ret = t14s_profile_probe(&ec->profile);
> +	if (ret < 0)
> +		return ret;
> +
>  	ret = devm_request_threaded_irq(dev, client->irq, NULL,
>  					t14s_ec_irq_handler,
>  					IRQF_ONESHOT, dev_name(dev), ec);
> 

-- 
 i.