From: "Andy Yan" <andyshrk@163.com>
To: dmitry.baryshkov@oss.qualcomm.com, heiko@sntech.de
Cc: hjc@rock-chips.com, mripard@kernel.org, naoki@radxa.com,
stephen@radxa.com, cristian.ciocaltea@collabora.com,
neil.armstrong@linaro.org, Laurent.pinchart@ideasonboard.com,
yubing.zhang@rock-chips.com, krzk+dt@kernel.org,
devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
robh@kernel.org, sebastian.reichel@collabora.com,
"Andy Yan" <andy.yan@rock-chips.com>
Subject: Re:[PATCH v6 00/10] Add support for RK3588 DisplayPort Controller
Date: Thu, 21 Aug 2025 18:44:21 +0800 (CST) [thread overview]
Message-ID: <1ebeae81.8b20.198cc3ac94a.Coremail.andyshrk@163.com> (raw)
In-Reply-To: <20250728082846.3811429-1-andyshrk@163.com>
Hello Dmitry,
At 2025-07-28 16:28:25, "Andy Yan" <andyshrk@163.com> wrote:
>From: Andy Yan <andy.yan@rock-chips.com>
>
>
>There are two DW DPTX based DisplayPort Controller on rk3588 which
>are compliant with the DisplayPort Specification Version 1.4 with
>the following features:
>
>* DisplayPort 1.4a
>* Main Link: 1/2/4 lanes
>* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
>* AUX channel 1Mbps
>* Single Stream Transport(SST)
>* Multistream Transport (MST)
>* Type-C support (alternate mode)
>* HDCP 2.2, HDCP 1.3
>* Supports up to 8/10 bits per color component
>* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
>* Pixel clock up to 594MHz
>* I2S, SPDIF audio interface
>
>The current version of this patch series only supports basic display outputs.
>I conducted tests with DP0 in 1080p and 4K@60 YCbCr4:2:0 modes; the ALT/Type-C
>mode was tested on Rock 5B, DP1 was tested on Rock 5 ITX by Stephen and Piotr.
>HDCP and audio features remain unimplemented.
>For RK3588, it's only support SST, while in the upcoming RK3576, it can support
>MST output.
Could you take this series? It would be nice if they could land Linux 6.18.
>
>
>Changes in v6:
>- Use drm_dp_vsc_sdp_supported
>- Store bpc/bpp/color format in dw_dp_bridge_state
>- Collect Reviewed-by tags
>- Link to V5: https://lore.kernel.org/linux-rockchip/20250716100440.816351-1-andyshrk@163.com/
>
>Changes in v5:
>- Use drm_dp_read_sink_count_cap instead of the private implementation.
>- First included in this version.
>- Link to V4: https://lore.kernel.org/linux-rockchip/20250619063900.700491-1-andyshrk@163.com/
>
>Changes in v4:
>- Drop unnecessary header files
>- Switch to devm_drm_bridge_alloc
>- Drop unused function
>- Add platform_set_drvdata
>- Link to V3: https://lore.kernel.org/linux-rockchip/20250403033748.245007-1-andyshrk@163.com/
>
>
>Changes in v3:
>- Rebase on drm-misc-next
>- Switch to common helpers to power up/down dp link
>- Only pass parameters to phy that should be set
>- First introduced in this version.
>- First introduced in this version.
>- Add RA620 into bridge chain.
>- Link to V2: https://lore.kernel.org/linux-rockchip/20250312104214.525242-1-andyshrk@163.com/
>
>Changes in v2:
>- Fix a character encoding issue
>- Fix compile error when build as module
>- Add phy init
>- Only use one dw_dp_link_train_set
>- inline dw_dp_phy_update_vs_emph
>- Use dp_sdp
>- Check return value of drm_modeset_lock
>- Merge code in atomic_pre_enable/mode_fixup to atomic_check
>- Return NULL if can't find a supported output format
>- Fix max_link_rate from plat_data
>- no include uapi path
>- switch to drmm_encoder_init
>- Sort in alphabetical order
>- Link to V1: https://lore.kernel.org/linux-rockchip/20250223113036.74252-1-andyshrk@163.com/
>
>Andy Yan (10):
> dt-bindings: display: rockchip: Add schema for RK3588 DPTX Controller
> drm/bridge: synopsys: Add DW DPTX Controller support library
> drm/rockchip: Add RK3588 DPTX output support
> MAINTAINERS: Add entry for DW DPTX Controller bridge
> dt-bindings: display: simple-bridge: Add ra620 compatible
> drm/birdge: simple-bridge: Add support for radxa ra620
> arm64: dts: rockchip: Add DP0 for rk3588
> arm64: dts: rockchip: Add DP1 for rk3588
> arm64: dts: rockchip: Enable DisplayPort for rk3588s Cool Pi 4B
> arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX
>
> .../display/bridge/simple-bridge.yaml | 1 +
> .../display/rockchip/rockchip,dw-dp.yaml | 150 ++
> MAINTAINERS | 8 +
> arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 30 +
> .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 30 +
> .../boot/dts/rockchip/rk3588-rock-5-itx.dts | 59 +
> .../boot/dts/rockchip/rk3588s-coolpi-4b.dts | 37 +
> drivers/gpu/drm/bridge/simple-bridge.c | 5 +
> drivers/gpu/drm/bridge/synopsys/Kconfig | 7 +
> drivers/gpu/drm/bridge/synopsys/Makefile | 1 +
> drivers/gpu/drm/bridge/synopsys/dw-dp.c | 2094 +++++++++++++++++
> drivers/gpu/drm/rockchip/Kconfig | 9 +
> drivers/gpu/drm/rockchip/Makefile | 1 +
> drivers/gpu/drm/rockchip/dw_dp-rockchip.c | 150 ++
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 1 +
> drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
> include/drm/bridge/dw_dp.h | 20 +
> 17 files changed, 2604 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-dp.c
> create mode 100644 drivers/gpu/drm/rockchip/dw_dp-rockchip.c
> create mode 100644 include/drm/bridge/dw_dp.h
>
>--
>2.43.0
>
next prev parent reply other threads:[~2025-08-21 10:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-28 8:28 [PATCH " Andy Yan
2025-07-28 8:28 ` [PATCH v6 01/10] dt-bindings: display: rockchip: Add schema for RK3588 DPTX Controller Andy Yan
2025-07-28 8:28 ` [PATCH v6 02/10] drm/bridge: synopsys: Add DW DPTX Controller support library Andy Yan
2025-07-28 12:05 ` Dmitry Baryshkov
2025-08-15 17:44 ` Sebastian Reichel
2025-07-28 8:28 ` [PATCH v6 03/10] drm/rockchip: Add RK3588 DPTX output support Andy Yan
2025-07-28 8:28 ` [PATCH v6 04/10] MAINTAINERS: Add entry for DW DPTX Controller bridge Andy Yan
2025-08-21 11:31 ` Dmitry Baryshkov
2025-07-28 8:28 ` [PATCH v6 05/10] dt-bindings: display: simple-bridge: Add ra620 compatible Andy Yan
2025-07-28 8:28 ` [PATCH v6 06/10] drm/birdge: simple-bridge: Add support for radxa ra620 Andy Yan
2025-08-21 11:36 ` Dmitry Baryshkov
2025-07-28 8:28 ` [PATCH v6 07/10] arm64: dts: rockchip: Add DP0 for rk3588 Andy Yan
2025-07-29 15:10 ` Sebastian Reichel
2025-07-28 8:28 ` [PATCH v6 08/10] arm64: dts: rockchip: Add DP1 " Andy Yan
2025-07-29 15:10 ` Sebastian Reichel
2025-07-28 8:28 ` [PATCH v6 09/10] arm64: dts: rockchip: Enable DisplayPort for rk3588s Cool Pi 4B Andy Yan
2025-07-29 17:09 ` Sebastian Reichel
2025-07-30 12:15 ` Andy Yan
2025-07-31 2:52 ` Andy Yan
2025-08-15 18:00 ` Sebastian Reichel
2025-07-28 8:28 ` [PATCH v6 10/10] arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX Andy Yan
2025-08-21 10:44 ` Andy Yan [this message]
2025-08-21 11:36 ` [PATCH v6 00/10] Add support for RK3588 DisplayPort Controller Dmitry Baryshkov
2025-08-22 9:34 ` Andy Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ebeae81.8b20.198cc3ac94a.Coremail.andyshrk@163.com \
--to=andyshrk@163.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=andy.yan@rock-chips.com \
--cc=cristian.ciocaltea@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mripard@kernel.org \
--cc=naoki@radxa.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=stephen@radxa.com \
--cc=yubing.zhang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®