From mboxrd@z Thu Jan  1 00:00:00 1970
Received: from mail-io1-f45.google.com (mail-io1-f45.google.com [209.85.166.45])
	(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
	(No client certificate requested)
	by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6F21518FDCE
	for <linux-kernel@vger.kernel.org>; Mon, 30 Sep 2024 15:35:08 +0000 (UTC)
Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.166.45
ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116;
	t=1727710512; cv=none; b=Aii6T8/3iRQm4YL1BuaOkdEwNj8aOFWXSBO9QGb17OlNgViPG0fPaAsrPcmZW7rSI4KmLWsWjGeTgDDiQRJ22kikzCX+lgS8oOthJ/MiGW0d5F9x3A3xiinn1mD4nE+twJ6x3Z0/kS3S+5AmZw2L4CYEKGM4kzGiwOPJ+VjhC7s=
ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org;
	s=arc-20240116; t=1727710512; c=relaxed/simple;
	bh=WbX8hkH0X8va2GockTNxffv1VLL7xknAnMFMr+uyUnI=;
	h=Message-ID:Date:MIME-Version:Subject:To:Cc:References:From:
	 In-Reply-To:Content-Type; b=OSPnr75qh4sjVwdbCWNbig8IpgmtQvL4J9FKu81VF1xNLlzbzt4fah0OU/gLFishMlzQoEu+ZM/kLZozrp0gwQDqrLacdn0/zWq6kO7QpnCRUfJgLCsfLbaK7uM1olgp+GdRKABmo9HRMiech5dzp/dyV7satgW+eHFKNGjiMkE=
ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linuxfoundation.org; spf=pass smtp.mailfrom=linuxfoundation.org; dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.b=V8EkMU8L; arc=none smtp.client-ip=209.85.166.45
Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linuxfoundation.org
Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linuxfoundation.org
Authentication-Results: smtp.subspace.kernel.org;
	dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.b="V8EkMU8L"
Received: by mail-io1-f45.google.com with SMTP id ca18e2360f4ac-82aef2c1e5fso167193739f.1
        for <linux-kernel@vger.kernel.org>; Mon, 30 Sep 2024 08:35:08 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=linuxfoundation.org; s=google; t=1727710507; x=1728315307; darn=vger.kernel.org;
        h=content-transfer-encoding:in-reply-to:from:content-language
         :references:cc:to:subject:user-agent:mime-version:date:message-id
         :from:to:cc:subject:date:message-id:reply-to;
        bh=opvvxDdaM5/hMNmylGRLNY0fmEhnPy7cAbYhM+UtVOU=;
        b=V8EkMU8LcBPEkkBMaof4d1PMkRcrbQLtI58Blvyn7BH/swQYvENx/2puHKWNOQqebO
         eQTkB9MtyHhN+Z4EP1H8RWpRqZ6r9J1GxAZGG/Ou43S1NWm6AV6u9jCvP03Znh2JlZW5
         jhhPmfxjD6paHoMRuUDxBw349mX1/a2wzotsA=
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=1e100.net; s=20230601; t=1727710507; x=1728315307;
        h=content-transfer-encoding:in-reply-to:from:content-language
         :references:cc:to:subject:user-agent:mime-version:date:message-id
         :x-gm-message-state:from:to:cc:subject:date:message-id:reply-to;
        bh=opvvxDdaM5/hMNmylGRLNY0fmEhnPy7cAbYhM+UtVOU=;
        b=KbdJ4cBwmLiTKoqgP7Ofmm5j6rbb/MssQ32fOjRPCAB8PHGEi+15ny+OSzVDK+wd1Q
         KoZ638RxfJreaqXdVUL5SAeJYZJDORnzn2VwEq/nuajWHX/76VLdSpzMHCak9xufXVuq
         KYWL+0S40EkqZSs/hkeyOWXDnNUDOnHcEa4vvXfjL34XXH2SRV2TSfDiTBqgyLHonR06
         Eyd00nSIsxT3wqJxniNdoklJmPwkOtin2mT79svAA3TzyH3XF9fXqE5srs8zOLwz1iMj
         ADkbsx9hzEt1OTbQmijis9ouIICTtTnEV4ZLS+CtDwPY8lOwjWjVtr6XGGAgkAoz7Pqh
         RsYw==
X-Gm-Message-State: AOJu0Yy41rfF0kG/NcBg6PcYogJHFgFCSK3S2dRZSWI+tpCj9NsgyI/Y
	TRLmKlB8hsWpBfbsZ7pJVtbjSzXStvZ3VSFZwyJQC0kriT3cH4xsWAMKBcZECws=
X-Google-Smtp-Source: AGHT+IH8G63ZPFNw6Kucgp6zJdxLdHqEwS+xkGVz88ZO9GaKg/IctkEaj2No4Zl9L2810h2k4knmCg==
X-Received: by 2002:a05:6602:2dc2:b0:82a:a454:6306 with SMTP id ca18e2360f4ac-834931b41c7mr1197280739f.1.1727710507264;
        Mon, 30 Sep 2024 08:35:07 -0700 (PDT)
Received: from [192.168.1.128] ([38.175.170.29])
        by smtp.gmail.com with ESMTPSA id ca18e2360f4ac-83493744f7esm225584039f.55.2024.09.30.08.35.05
        (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128);
        Mon, 30 Sep 2024 08:35:06 -0700 (PDT)
Message-ID: <1f4dc3b7-f05d-487b-b22b-5f0c37921672@linuxfoundation.org>
Date: Mon, 30 Sep 2024 09:35:04 -0600
Precedence: bulk
X-Mailing-List: linux-kernel@vger.kernel.org
List-Id: <linux-kernel.vger.kernel.org>
List-Subscribe: <mailto:linux-kernel+subscribe@vger.kernel.org>
List-Unsubscribe: <mailto:linux-kernel+unsubscribe@vger.kernel.org>
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH] cpupower: Add Chinese Simplified translation
To: Kieran Moy <kfatyuip@gmail.com>, shuah@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
References: <20240522165745.76561-1-kfatyuip@gmail.com>
Content-Language: en-US
From: Shuah Khan <skhan@linuxfoundation.org>
In-Reply-To: <20240522165745.76561-1-kfatyuip@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit

On 5/22/24 10:57, Kieran Moy wrote:
> Add Chinese Simplified translation for cpupower
> 
> Signed-off-by: Kieran Moy <kfatyuip@gmail.com>

Sorry this got stuck in my Inbox.
Adding linux-pm

Also I would like Chineese speakers in the community review
and give me a Reviwed-by - any help is much appreciated.

> ---
>   tools/power/cpupower/Makefile    |   2 +-
>   tools/power/cpupower/po/zh_CN.po | 942 +++++++++++++++++++++++++++++++
>   2 files changed, 943 insertions(+), 1 deletion(-)
>   create mode 100644 tools/power/cpupower/po/zh_CN.po
> 
> diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
> index b53753dee..ccbd78da3 100644
> --- a/tools/power/cpupower/Makefile
> +++ b/tools/power/cpupower/Makefile
> @@ -57,7 +57,7 @@ LIB_MIN=			1
>   
>   PACKAGE =			cpupower
>   PACKAGE_BUGREPORT =		linux-pm@vger.kernel.org
> -LANGUAGES = 			de fr it cs pt ka
> +LANGUAGES = 			de fr it cs pt ka zh_CN
>   
>   
>   # Directory definitions. These are default and most probably
> diff --git a/tools/power/cpupower/po/zh_CN.po b/tools/power/cpupower/po/zh_CN.po
> new file mode 100644
> index 000000000..cca9a1725
> --- /dev/null
> +++ b/tools/power/cpupower/po/zh_CN.po
> @@ -0,0 +1,942 @@
> +# Chinese Simplified translations for cpufrequtils package
> +# Copyright (C) 2004 THE PACKAGE'S COPYRIGHT HOLDER
> +# This file is distributed under the same license as the cpufrequtils package.
> +#
> +#, fuzzy
> +msgid ""
> +msgstr ""
> +"Project-Id-Version: cpufrequtils 006\n"
> +"Report-Msgid-Bugs-To: \n"
> +"POT-Creation-Date: 2011-03-08 17:03+0100\n"
> +"PO-Revision-Date: 2024-05-22 15:36+0000\n"
> +"Last-Translator: Kieran Moy <kfatyuip@gmail.com>\n"
> +"Language-Team: NONE\n"
> +"Language: zh_CN\n"
> +"MIME-Version: 1.0\n"
> +"Content-Type: text/plain; charset=UTF-8\n"
> +"Content-Transfer-Encoding: 8bit\n"
> +"X-Generator: Poedit 3.4.2\n"
> +
> +#: utils/idle_monitor/nhm_idle.c:36
> +msgid "Processor Core C3"
> +msgstr "处理器核心 C3"
> +
> +#: utils/idle_monitor/nhm_idle.c:43
> +msgid "Processor Core C6"
> +msgstr "处理器核心 C6"
> +
> +#: utils/idle_monitor/nhm_idle.c:51
> +msgid "Processor Package C3"
> +msgstr "处理器套件 C3"
> +
> +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
> +msgid "Processor Package C6"
> +msgstr "处理器套件 C6"
> +
> +#: utils/idle_monitor/snb_idle.c:33
> +msgid "Processor Core C7"
> +msgstr "处理器核心 C7"
> +
> +#: utils/idle_monitor/snb_idle.c:40
> +msgid "Processor Package C2"
> +msgstr "处理器套件 C2"
> +
> +#: utils/idle_monitor/snb_idle.c:47
> +msgid "Processor Package C7"
> +msgstr "处理器套件 C7"
> +
> +#: utils/idle_monitor/amd_fam14h_idle.c:56
> +msgid "Package in sleep state (PC1 or deeper)"
> +msgstr "处于睡眠状态的包（PC1 或更深）"
> +
> +#: utils/idle_monitor/amd_fam14h_idle.c:63
> +msgid "Processor Package C1"
> +msgstr "处理器套件 C1"
> +
> +#: utils/idle_monitor/amd_fam14h_idle.c:77
> +msgid "North Bridge P1 boolean counter (returns 0 or 1)"
> +msgstr "北桥 P1 布尔计数器（返回 0 或 1）"
> +
> +#: utils/idle_monitor/mperf_monitor.c:35
> +msgid "Processor Core not idle"
> +msgstr "处理器核心不空闲"
> +
> +#: utils/idle_monitor/mperf_monitor.c:42
> +msgid "Processor Core in an idle state"
> +msgstr "处理器核心处于空闲状态"
> +
> +#: utils/idle_monitor/mperf_monitor.c:50
> +msgid "Average Frequency (including boost) in MHz"
> +msgstr "平均频率（包括增加频率），单位 MHz"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:66
> +#, c-format
> +msgid ""
> +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
> +"interval_sec | -c command ...]\n"
> +msgstr ""
> +"cpupower monitor：[-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
> +"interval_sec | -c command...]\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:69
> +#, c-format
> +msgid ""
> +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
> +"interval_sec | -c command ...]\n"
> +msgstr ""
> +"cpupower monitor：[-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
> +"interval_sec | -c command...]\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:71
> +#, c-format
> +msgid "\t -v: be more verbose\n"
> +msgstr "-v：更详细\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:73
> +#, c-format
> +msgid "\t -h: print this help\n"
> +msgstr "-h：打印此帮助\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:74
> +#, c-format
> +msgid "\t -i: time interval to measure for in seconds (default 1)\n"
> +msgstr "-i：测量的时间间隔（以秒为单位）（默认 1）\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:75
> +#, c-format
> +msgid "\t -t: show CPU topology/hierarchy\n"
> +msgstr "-t：显示CPU拓扑/层次结构\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:76
> +#, c-format
> +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
> +msgstr "-l：列出可用的 CPU 睡眠监视器（与 -m 一起使用）\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:77
> +#, c-format
> +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
> +msgstr "-m：仅显示特定的CPU睡眠监视器（按相同顺序）\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:79
> +#, c-format
> +msgid ""
> +"only one of: -t, -l, -m are allowed\n"
> +"If none of them is passed,"
> +msgstr ""
> +"仅允许以下之一：-t、-l、-m\n"
> +"如果都没有通过的话"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:80
> +#, c-format
> +msgid " all supported monitors are shown\n"
> +msgstr " 显示所有支持的显示器\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:197
> +#, c-format
> +msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
> +msgstr "监视器 %s、计数器 %s 无计数功能。 执行错误\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:207
> +#, c-format
> +msgid " *is offline\n"
> +msgstr " *离线\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:236
> +#, c-format
> +msgid "%s: max monitor name length (%d) exceeded\n"
> +msgstr "%s：超出最大监视器名称长度 (%d)\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:250
> +#, c-format
> +msgid "No matching monitor found in %s, try -l option\n"
> +msgstr "在 %s 中找不到匹配的监视器，请尝试 -l 选项\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:266
> +#, c-format
> +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
> +msgstr "监视器“%s”（%d 状态）- 可能会在 %u 秒后溢出\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:319
> +#, c-format
> +msgid "%s took %.5f seconds and exited with status %d\n"
> +msgstr "%s 用了 %.5f 秒并退出，状态为 %d\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:406
> +#, c-format
> +msgid "Cannot read number of available processors\n"
> +msgstr "无法读取可用处理器的数量\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:417
> +#, c-format
> +msgid "Available monitor %s needs root access\n"
> +msgstr "可用监视器 %s 需要 root 访问权限\n"
> +
> +#: utils/idle_monitor/cpupower-monitor.c:428
> +#, c-format
> +msgid "No HW Cstate monitors found\n"
> +msgstr "未找到 HW Cstate 监视器\n"
> +
> +#: utils/cpupower.c:78
> +#, c-format
> +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
> +msgstr "cpupower [ -c cpulist ] subcommand [ARGS]\n"
> +
> +#: utils/cpupower.c:79
> +#, c-format
> +msgid "cpupower --version\n"
> +msgstr "cpupower --version\n"
> +
> +#: utils/cpupower.c:80
> +#, c-format
> +msgid "Supported subcommands are:\n"
> +msgstr "支持的子命令有：\n"
> +
> +#: utils/cpupower.c:83
> +#, c-format
> +msgid ""
> +"\n"
> +"Some subcommands can make use of the -c cpulist option.\n"
> +msgstr ""
> +"\n"
> +"某些子命令可以使用 -c cpulist 选项。\n"
> +
> +#: utils/cpupower.c:84
> +#, c-format
> +msgid "Look at the general cpupower manpage how to use it\n"
> +msgstr "看看一般的cpupower manpage如何使用它\n"
> +
> +#: utils/cpupower.c:85
> +#, c-format
> +msgid "and read up the subcommand's manpage whether it is supported.\n"
> +msgstr "并阅读子命令的manpage是否受支持。\n"
> +
> +#: utils/cpupower.c:86
> +#, c-format
> +msgid ""
> +"\n"
> +"Use cpupower help subcommand for getting help for above subcommands.\n"
> +msgstr ""
> +"\n"
> +"使用 cpupower help subcommand获取上述子命令的帮助。\n"
> +
> +#: utils/cpupower.c:91
> +#, c-format
> +msgid "Report errors and bugs to %s, please.\n"
> +msgstr "请向 %s 报告错误和错误。\n"
> +
> +#: utils/cpupower.c:114
> +#, c-format
> +msgid "Error parsing cpu list\n"
> +msgstr "解析cpu列表时出错\n"
> +
> +#: utils/cpupower.c:172
> +#, c-format
> +msgid "Subcommand %s needs root privileges\n"
> +msgstr "子命令 %s 需要 root 权限\n"
> +
> +#: utils/cpufreq-info.c:31
> +#, c-format
> +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
> +msgstr "无法计算 CPU 数量（%s：%s），假设为 1\n"
> +
> +#: utils/cpufreq-info.c:63
> +#, c-format
> +msgid ""
> +"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
> +msgstr "最低 CPU 频率 - 最高 CPU 频率 - 调速器\n"
> +
> +#: utils/cpufreq-info.c:151
> +#, c-format
> +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
> +msgstr "评估 CPU %d 上的 Boost 功能时出错 - 您是 root 吗？\n"
> +
> +#. P state changes via MSR are identified via cpuid 80000007
> +#. on Intel and AMD, but we assume boost capable machines can do that
> +#. if (cpuid_eax(0x80000000) >= 0x80000007
> +#. && (cpuid_edx(0x80000007) & (1 << 7)))
> +#.
> +#: utils/cpufreq-info.c:161
> +#, c-format
> +msgid "  boost state support: \n"
> +msgstr "  升压状态支持：\n"
> +
> +#: utils/cpufreq-info.c:163
> +#, c-format
> +msgid "    Supported: %s\n"
> +msgstr "    支持：%s\n"
> +
> +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
> +msgid "yes"
> +msgstr "是"
> +
> +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
> +msgid "no"
> +msgstr "不是"
> +
> +#: utils/cpufreq-info.c:164
> +#, c-format
> +msgid "    Active: %s\n"
> +msgstr "    活跃：%s\n"
> +
> +#: utils/cpufreq-info.c:177
> +#, c-format
> +msgid "    Boost States: %d\n"
> +msgstr "    提升状态：%d\n"
> +
> +#: utils/cpufreq-info.c:178
> +#, c-format
> +msgid "    Total States: %d\n"
> +msgstr "    状态总数：%d\n"
> +
> +#: utils/cpufreq-info.c:181
> +#, c-format
> +msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
> +msgstr "    Pstate-Pb%d：%luMHz（升压状态）\n"
> +
> +#: utils/cpufreq-info.c:184
> +#, c-format
> +msgid "    Pstate-P%d:  %luMHz\n"
> +msgstr "    Pstate-P%d：%luMHz\n"
> +
> +#: utils/cpufreq-info.c:211
> +#, c-format
> +msgid "  no or unknown cpufreq driver is active on this CPU\n"
> +msgstr "  该 CPU 上没有或未知的 cpufreq 驱动程序处于活动状态\n"
> +
> +#: utils/cpufreq-info.c:213
> +#, c-format
> +msgid "  driver: %s\n"
> +msgstr "  驱动程序：%s\n"
> +
> +#: utils/cpufreq-info.c:219
> +#, c-format
> +msgid "  CPUs which run at the same hardware frequency: "
> +msgstr "  以相同硬件频率运行的 CPU："
> +
> +#: utils/cpufreq-info.c:230
> +#, c-format
> +msgid "  CPUs which need to have their frequency coordinated by software: "
> +msgstr "  需要通过软件协调频率的 CPU："
> +
> +#: utils/cpufreq-info.c:241
> +#, c-format
> +msgid "  maximum transition latency: "
> +msgstr "  最大转换延迟："
> +
> +#: utils/cpufreq-info.c:247
> +#, c-format
> +msgid "  hardware limits: "
> +msgstr "  硬件限制："
> +
> +#: utils/cpufreq-info.c:256
> +#, c-format
> +msgid "  available frequency steps: "
> +msgstr "  可用频率范围："
> +
> +#: utils/cpufreq-info.c:269
> +#, c-format
> +msgid "  available cpufreq governors: "
> +msgstr "  可用的cpufreq调节器："
> +
> +#: utils/cpufreq-info.c:280
> +#, c-format
> +msgid "  current policy: frequency should be within "
> +msgstr "  当前政策：频率应在"
> +
> +#: utils/cpufreq-info.c:282
> +#, c-format
> +msgid " and "
> +msgstr "和"
> +
> +#: utils/cpufreq-info.c:286
> +#, c-format
> +msgid ""
> +"The governor \"%s\" may decide which speed to use\n"
> +"                  within this range.\n"
> +msgstr ""
> +"调速器“%s”可以决定使用哪种速度\n"
> +"                   在这个范围内。\n"
> +
> +#: utils/cpufreq-info.c:293
> +#, c-format
> +msgid "  current CPU frequency is "
> +msgstr "  当前CPU频率是"
> +
> +#: utils/cpufreq-info.c:296
> +#, c-format
> +msgid " (asserted by call to hardware)"
> +msgstr " （通过调用硬件来断言）"
> +
> +#: utils/cpufreq-info.c:304
> +#, c-format
> +msgid "  cpufreq stats: "
> +msgstr "  cpu频率统计："
> +
> +#: utils/cpufreq-info.c:472
> +#, c-format
> +msgid "Usage: cpupower freqinfo [options]\n"
> +msgstr "用法：cpupower freqinfo [选项]\n"
> +
> +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
> +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
> +#, c-format
> +msgid "Options:\n"
> +msgstr "选项：\n"
> +
> +#: utils/cpufreq-info.c:474
> +#, c-format
> +msgid "  -e, --debug          Prints out debug information [default]\n"
> +msgstr "  -e, --debug 打印出调试信息[默认]\n"
> +
> +#: utils/cpufreq-info.c:475
> +#, c-format
> +msgid ""
> +"  -f, --freq           Get frequency the CPU currently runs at, according\n"
> +"                       to the cpufreq core *\n"
> +msgstr ""
> +"  -f, --freq 获取CPU当前运行的频率，根据\n"
> +"                        到 cpufreq 核心 *\n"
> +
> +#: utils/cpufreq-info.c:477
> +#, c-format
> +msgid ""
> +"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
> +"                       it from hardware (only available to root) *\n"
> +msgstr ""
> +"  -w, --hwfreq 通过读取获取CPU当前运行的频率\n"
> +"                        它来自硬件（仅适用于root）*\n"
> +
> +#: utils/cpufreq-info.c:479
> +#, c-format
> +msgid ""
> +"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
> +"allowed *\n"
> +msgstr "  -l, --hwlimits 确定允许的最小和最大 CPU 频率 *\n"
> +
> +#: utils/cpufreq-info.c:480
> +#, c-format
> +msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
> +msgstr "  -d, --driver 确定使用的 cpufreq 内核驱动程序 *\n"
> +
> +#: utils/cpufreq-info.c:481
> +#, c-format
> +msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
> +msgstr "  -p, --policy 获取当前使用的cpufreq策略 *\n"
> +
> +#: utils/cpufreq-info.c:482
> +#, c-format
> +msgid "  -g, --governors      Determines available cpufreq governors *\n"
> +msgstr "  -g, --governors 确定可用的 cpufreq 调节器 *\n"
> +
> +#: utils/cpufreq-info.c:483
> +#, c-format
> +msgid ""
> +"  -r, --related-cpus   Determines which CPUs run at the same hardware "
> +"frequency *\n"
> +msgstr "  -r, --lated-cpus 确定哪些 CPU 以相同的硬件频率运行 *\n"
> +
> +#: utils/cpufreq-info.c:484
> +#, c-format
> +msgid ""
> +"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
> +"                       coordinated by software *\n"
> +msgstr ""
> +"  -a, --affected-cpus 确定哪些 CPU 需要其频率\n"
> +"                        由软件协调*\n"
> +
> +#: utils/cpufreq-info.c:486
> +#, c-format
> +msgid "  -s, --stats          Shows cpufreq statistics if available\n"
> +msgstr "  -s, --stats 显示 cpufreq 统计信息（如果有）\n"
> +
> +#: utils/cpufreq-info.c:487
> +#, c-format
> +msgid ""
> +"  -y, --latency        Determines the maximum latency on CPU frequency "
> +"changes *\n"
> +msgstr "  -y, --latency 确定 CPU 频率变化的最大延迟*\n"
> +
> +#: utils/cpufreq-info.c:488
> +#, c-format
> +msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
> +msgstr "  -b, --boost 检查 Turbo 或 boost 模式 *\n"
> +
> +#: utils/cpufreq-info.c:489
> +#, c-format
> +msgid ""
> +"  -o, --proc           Prints out information like provided by the /proc/"
> +"cpufreq\n"
> +"                       interface in 2.4. and early 2.6. kernels\n"
> +msgstr ""
> +"  -o, --proc 打印 /proc/cpufreq 提供的信息\n"
> +"                        2.4 中的接口。 以及 2.6 之前的内核。\n"
> +
> +#: utils/cpufreq-info.c:491
> +#, c-format
> +msgid ""
> +"  -m, --human          human-readable output for the -f, -w, -s and -y "
> +"parameters\n"
> +msgstr "  -m, -- human -f, -w, -s 和 -y 参数的人类可读输出\n"
> +
> +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
> +#, c-format
> +msgid "  -h, --help           Prints out this screen\n"
> +msgstr "  -h, --help 打印此屏幕\n"
> +
> +#: utils/cpufreq-info.c:495
> +#, c-format
> +msgid ""
> +"If no argument or only the -c, --cpu parameter is given, debug output "
> +"about\n"
> +"cpufreq is printed which is useful e.g. for reporting bugs.\n"
> +msgstr ""
> +"screen如果没有参数或仅给出了 -c, --cpu 参数，则调试输出有关\n"
> +"cpufreq 被打印出来，这很有用，例如 用于报告错误。\n"
> +
> +#: utils/cpufreq-info.c:497
> +#, c-format
> +msgid ""
> +"For the arguments marked with *, omitting the -c or --cpu argument is\n"
> +"equivalent to setting it to zero\n"
> +msgstr ""
> +"对于标有 * 的参数，省略 -c 或 --cpu 参数是\n"
> +"相当于将其设置为零\n"
> +
> +#: utils/cpufreq-info.c:580
> +#, c-format
> +msgid ""
> +"The argument passed to this tool can't be combined with passing a --cpu "
> +"argument\n"
> +msgstr "传递给此工具的参数不能与传递 --cpu 参数结合使用\n"
> +
> +#: utils/cpufreq-info.c:596
> +#, c-format
> +msgid ""
> +"You can't specify more than one --cpu parameter and/or\n"
> +"more than one output-specific argument\n"
> +msgstr ""
> +"您不能指定多个 --cpu 参数和/或\n"
> +"多个特定于输出的参数\n"
> +
> +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
> +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
> +#, c-format
> +msgid "invalid or unknown argument\n"
> +msgstr "无效或未知的参数\n"
> +
> +#: utils/cpufreq-info.c:617
> +#, c-format
> +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
> +msgstr "无法分析 CPU %d，因为它似乎不存在\n"
> +
> +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
> +#, c-format
> +msgid "analyzing CPU %d:\n"
> +msgstr "分析 CPU %d：\n"
> +
> +#: utils/cpufreq-set.c:25
> +#, c-format
> +msgid "Usage: cpupower frequency-set [options]\n"
> +msgstr "用法：cpupower frequency-set [选项]\n"
> +
> +#: utils/cpufreq-set.c:27
> +#, c-format
> +msgid ""
> +"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
> +"select\n"
> +msgstr "  -d FREQ, --min FREQ 调控器可以选择的新的最小 CPU 频率\n"
> +
> +#: utils/cpufreq-set.c:28
> +#, c-format
> +msgid ""
> +"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
> +"select\n"
> +msgstr "  -u FREQ, --max FREQ 调控器可以选择的新的最大 CPU 频率\n"
> +
> +#: utils/cpufreq-set.c:29
> +#, c-format
> +msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
> +msgstr "  -g GOV, --governor GOV 新的 cpufreq 调节器\n"
> +
> +#: utils/cpufreq-set.c:30
> +#, c-format
> +msgid ""
> +"  -f FREQ, --freq FREQ     specific frequency to be set. Requires "
> +"userspace\n"
> +"                           governor to be available and loaded\n"
> +msgstr ""
> +"  -f FREQ, --freq FREQ 要设置的特定频率。 需要用户空间\n"
> +"                            调速器可用并已加载\n"
> +
> +#: utils/cpufreq-set.c:32
> +#, c-format
> +msgid "  -r, --related            Switches all hardware-related CPUs\n"
> +msgstr "  -r, --related 切换所有与硬件相关的CPU\n"
> +
> +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
> +#, c-format
> +msgid "  -h, --help               Prints out this screen\n"
> +msgstr "  -h, --help 打印此屏幕\n"
> +
> +#: utils/cpufreq-set.c:35
> +#, c-format
> +msgid ""
> +"Notes:\n"
> +"1. Omitting the -c or --cpu argument is equivalent to setting it to "
> +"\"all\"\n"
> +msgstr ""
> +"注意：\n"
> +"1.省略-c或--cpu参数相当于将其设置为“all”\n"
> +
> +#: utils/cpufreq-set.c:37
> +#, c-format
> +msgid ""
> +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
> +"parameter\n"
> +"   except the -c CPU, --cpu CPU parameter\n"
> +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
> +"   by postfixing the value with the wanted unit name, without any space\n"
> +"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
> +msgstr ""
> +"2. -f FREQ、--freq FREQ参数不能与任何其他参数组合使用\n"
> +"    除了 -c CPU、--cpu CPU 参数\n"
> +"3. 频率可以以 Hz、kHz（默认）、MHz、GHz 或 THz 为单位传递\n"
> +"    通过在值后面添加所需的单位名称，不带任何空格\n"
> +"    （以 kHz 为单位的频率 =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000）。\n"
> +
> +#: utils/cpufreq-set.c:57
> +#, c-format
> +msgid ""
> +"Error setting new values. Common errors:\n"
> +"- Do you have proper administration rights? (super-user?)\n"
> +"- Is the governor you requested available and modprobed?\n"
> +"- Trying to set an invalid policy?\n"
> +"- Trying to set a specific frequency, but userspace governor is not "
> +"available,\n"
> +"   for example because of hardware which cannot be set to a specific "
> +"frequency\n"
> +"   or because the userspace governor isn't loaded?\n"
> +msgstr ""
> +"设置新值时出错。 常见错误：\n"
> +"- 您有适当的管理权吗？ （超级用户？）\n"
> +"- 您请求的调控器是否可用并已进行 modprobed？\n"
> +"- 尝试设置无效的策略？\n"
> +"- 尝试设置特定频率，但用户空间调控器不可用，\n"
> +"    例如由于硬件无法设置为特定频率\n"
> +"    或者因为用户空间调控器未加载？\n"
> +
> +#: utils/cpufreq-set.c:170
> +#, c-format
> +msgid "wrong, unknown or unhandled CPU?\n"
> +msgstr "错误、未知或未处理的CPU？\n"
> +
> +#: utils/cpufreq-set.c:302
> +#, c-format
> +msgid ""
> +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
> +"-g/--governor parameters\n"
> +msgstr ""
> +"-f/--freq 参数不能与 -d/--min、-u/--max 或\n"
> +"-g/--调速器参数\n"
> +
> +#: utils/cpufreq-set.c:308
> +#, c-format
> +msgid ""
> +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
> +"-g/--governor must be passed\n"
> +msgstr ""
> +"-f/--freq、-d/--min、-u/--max 和 -f/--freq 中的至少一个参数\n"
> +"-g/--governor 必须通过\n"
> +
> +#: utils/cpufreq-set.c:347
> +#, c-format
> +msgid "Setting cpu: %d\n"
> +msgstr "设置CPU：%d\n"
> +
> +#: utils/cpupower-set.c:22
> +#, c-format
> +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
> +msgstr "用法： cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
> +
> +#: utils/cpupower-set.c:24
> +#, c-format
> +msgid ""
> +"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
> +"                           Intel models [0-15], see manpage for details\n"
> +msgstr ""
> +"  -b, --perf-bias [VAL] 设置 CPU 的功耗与性能策略\n"
> +"                            Intel 型号 [0-15]，请参阅manpage了解详细信息\n"
> +
> +#: utils/cpupower-set.c:26
> +#, c-format
> +msgid ""
> +"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
> +msgstr "  -m, --sched-mc [VAL] 设置内核的多核调度程序策略。\n"
> +
> +#: utils/cpupower-set.c:27
> +#, c-format
> +msgid ""
> +"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
> +"policy.\n"
> +msgstr "  -s, --sched-smt [VAL] 设置内核的线程同级调度程序策略。\n"
> +
> +#: utils/cpupower-set.c:80
> +#, c-format
> +msgid "--perf-bias param out of range [0-%d]\n"
> +msgstr "--perf-bias 参数超出范围 [0-%d]\n"
> +
> +#: utils/cpupower-set.c:91
> +#, c-format
> +msgid "--sched-mc param out of range [0-%d]\n"
> +msgstr "--sched-mc 参数超出范围 [0-%d]\n"
> +
> +#: utils/cpupower-set.c:102
> +#, c-format
> +msgid "--sched-smt param out of range [0-%d]\n"
> +msgstr "--sched-smt 参数超出范围 [0-%d]\n"
> +
> +#: utils/cpupower-set.c:121
> +#, c-format
> +msgid "Error setting sched-mc %s\n"
> +msgstr "设置 sched-mc %s 时出错\n"
> +
> +#: utils/cpupower-set.c:127
> +#, c-format
> +msgid "Error setting sched-smt %s\n"
> +msgstr "设置 sched-smt %s 时出错\n"
> +
> +#: utils/cpupower-set.c:146
> +#, c-format
> +msgid "Error setting perf-bias value on CPU %d\n"
> +msgstr "在 CPU %d 上设置性能偏差值时出错\n"
> +
> +#: utils/cpupower-info.c:21
> +#, c-format
> +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
> +msgstr "用法：cpupower info [-b][-m][-s]\n"
> +
> +#: utils/cpupower-info.c:23
> +#, c-format
> +msgid ""
> +"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
> +"                           Intel models [0-15], see manpage for details\n"
> +msgstr ""
> +"  -b, --perf-bias    获取 CPU 在某些方面的功耗与性能策略\n"
> +"                            Intel 型号 [0-15]，请参阅联机帮助页了解详细信"
> +"息\n"
> +
> +#: utils/cpupower-info.c:25
> +#, c-format
> +msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
> +msgstr "  -m, --sched-mc 获取内核的多核调度程序策略。\n"
> +
> +#: utils/cpupower-info.c:26
> +#, c-format
> +msgid ""
> +"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
> +msgstr "  -s, --sched-smt    获取内核的线程同级调度程序策略。\n"
> +
> +#: utils/cpupower-info.c:28
> +#, c-format
> +msgid ""
> +"\n"
> +"Passing no option will show all info, by default only on core 0\n"
> +msgstr ""
> +"\n"
> +"不传递任何选项将显示所有信息，默认情况下仅在核心 0 上\n"
> +
> +#: utils/cpupower-info.c:102
> +#, c-format
> +msgid "System's multi core scheduler setting: "
> +msgstr "系统的多核调度器设置："
> +
> +#. if sysfs file is missing it's: errno == ENOENT
> +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
> +#, c-format
> +msgid "not supported\n"
> +msgstr "不支持\n"
> +
> +#: utils/cpupower-info.c:111
> +#, c-format
> +msgid "System's thread sibling scheduler setting: "
> +msgstr "系统的线程兄调度程序设置："
> +
> +#: utils/cpupower-info.c:126
> +#, c-format
> +msgid "Intel's performance bias setting needs root privileges\n"
> +msgstr "Intel的性能偏差设置需要root权限\n"
> +
> +#: utils/cpupower-info.c:128
> +#, c-format
> +msgid "System does not support Intel's performance bias setting\n"
> +msgstr "系统不支持Intel的性能偏差设置\n"
> +
> +#: utils/cpupower-info.c:147
> +#, c-format
> +msgid "Could not read perf-bias value\n"
> +msgstr "无法读取性能偏差值\n"
> +
> +#: utils/cpupower-info.c:150
> +#, c-format
> +msgid "perf-bias: %d\n"
> +msgstr "性能偏差：%d\n"
> +
> +#: utils/cpuidle-info.c:28
> +#, c-format
> +msgid "Analyzing CPU %d:\n"
> +msgstr "正在分析 CPU %d：\n"
> +
> +#: utils/cpuidle-info.c:32
> +#, c-format
> +msgid "CPU %u: No idle states\n"
> +msgstr "CPU %u：无空闲状态\n"
> +
> +#: utils/cpuidle-info.c:36
> +#, c-format
> +msgid "CPU %u: Can't read idle state info\n"
> +msgstr "CPU %u：无法读取空闲状态信息\n"
> +
> +#: utils/cpuidle-info.c:41
> +#, c-format
> +msgid "Could not determine max idle state %u\n"
> +msgstr "无法确定最大空闲状态 %u\n"
> +
> +#: utils/cpuidle-info.c:46
> +#, c-format
> +msgid "Number of idle states: %d\n"
> +msgstr "空闲状态数：%d\n"
> +
> +#: utils/cpuidle-info.c:48
> +#, c-format
> +msgid "Available idle states:"
> +msgstr "可用的空闲状态："
> +
> +#: utils/cpuidle-info.c:71
> +#, c-format
> +msgid "Flags/Description: %s\n"
> +msgstr "标志/描述：%s\n"
> +
> +#: utils/cpuidle-info.c:74
> +#, c-format
> +msgid "Latency: %lu\n"
> +msgstr "延迟：%lu\n"
> +
> +#: utils/cpuidle-info.c:76
> +#, c-format
> +msgid "Usage: %lu\n"
> +msgstr "用法：%lu\n"
> +
> +#: utils/cpuidle-info.c:78
> +#, c-format
> +msgid "Duration: %llu\n"
> +msgstr "持续时间：%llu\n"
> +
> +#: utils/cpuidle-info.c:90
> +#, c-format
> +msgid "Could not determine cpuidle driver\n"
> +msgstr "无法确定 cpuidle 驱动程序\n"
> +
> +#: utils/cpuidle-info.c:94
> +#, c-format
> +msgid "CPUidle driver: %s\n"
> +msgstr "CPU 空闲驱动程序：%s\n"
> +
> +#: utils/cpuidle-info.c:99
> +#, c-format
> +msgid "Could not determine cpuidle governor\n"
> +msgstr "无法确定 cpuidle 调控器\n"
> +
> +#: utils/cpuidle-info.c:103
> +#, c-format
> +msgid "CPUidle governor: %s\n"
> +msgstr "CPU 空闲调节器：%s\n"
> +
> +#: utils/cpuidle-info.c:122
> +#, c-format
> +msgid "CPU %u: Can't read C-state info\n"
> +msgstr "CPU %u：无法读取 C 状态信息\n"
> +
> +#. printf("Cstates: %d\n", cstates);
> +#: utils/cpuidle-info.c:127
> +#, c-format
> +msgid "active state:            C0\n"
> +msgstr "活动状态:            C0\n"
> +
> +#: utils/cpuidle-info.c:128
> +#, c-format
> +msgid "max_cstate:              C%u\n"
> +msgstr "最大c状态:              C%u\n"
> +
> +#: utils/cpuidle-info.c:129
> +#, c-format
> +msgid "maximum allowed latency: %lu usec\n"
> +msgstr "允许的最大延迟：%lu usec\n"
> +
> +#: utils/cpuidle-info.c:130
> +#, c-format
> +msgid "states:\t\n"
> +msgstr "状态：\t\n"
> +
> +#: utils/cpuidle-info.c:132
> +#, c-format
> +msgid "    C%d:                  type[C%d] "
> +msgstr "    C%d:                  类型[C%d]"
> +
> +#: utils/cpuidle-info.c:134
> +#, c-format
> +msgid "promotion[--] demotion[--] "
> +msgstr "晋升[--] 降级[--]"
> +
> +#: utils/cpuidle-info.c:135
> +#, c-format
> +msgid "latency[%03lu] "
> +msgstr "延迟[%03lu]"
> +
> +#: utils/cpuidle-info.c:137
> +#, c-format
> +msgid "usage[%08lu] "
> +msgstr "使用情况[%08lu]"
> +
> +#: utils/cpuidle-info.c:139
> +#, c-format
> +msgid "duration[%020Lu] \n"
> +msgstr "持续时间[%020Lu]\n"
> +
> +#: utils/cpuidle-info.c:147
> +#, c-format
> +msgid "Usage: cpupower idleinfo [options]\n"
> +msgstr "用法：cpupower idleinfo [选项]\n"
> +
> +#: utils/cpuidle-info.c:149
> +#, c-format
> +msgid "  -s, --silent         Only show general C-state information\n"
> +msgstr "  -s, --silent 只显示一般C状态信息\n"
> +
> +#: utils/cpuidle-info.c:150
> +#, c-format
> +msgid ""
> +"  -o, --proc           Prints out information like provided by the /proc/"
> +"acpi/processor/*/power\n"
> +"                       interface in older kernels\n"
> +msgstr ""
> +"  -o, --proc 打印 /proc/acpi/processor/*/power 提供的信息\n"
> +"                        旧内核中的接口\n"
> +
> +#: utils/cpuidle-info.c:209
> +#, c-format
> +msgid "You can't specify more than one output-specific argument\n"
> +msgstr "您不能指定多个特定于输出的参数\n"
> +
> +#~ msgid ""
> +#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
> +#~ "about\n"
> +#~ msgstr ""
> +#~ "  -c CPU, --cpu CPU    Numéro du CPU pour lequel l'information sera "
> +#~ "affichée\n"
> +
> +#~ msgid ""
> +#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
> +#~ "modified\n"
> +#~ msgstr ""
> +#~ "  -c CPU, --cpu CPU        numéro du CPU à prendre en compte pour les\n"
> +#~ "                           changements\n"


thanks,
-- Shuah