mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Alexander Koskovich <akoskovich@pm.me>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] usb: typec: qcom: Add support for per port VBUS detection
Date: Thu, 19 Mar 2026 14:26:00 +0100	[thread overview]
Message-ID: <1fd9048c-b0c0-451a-a6f7-e5474352d118@oss.qualcomm.com> (raw)
In-Reply-To: <20260312-qcom-typec-shared-vbus-v2-1-99ed9e500947@pm.me>

On 3/12/26 7:16 AM, Alexander Koskovich wrote:
> This is required for devices (e.g. ASUS ROG Phone 3) where more than
> one USB port can act as a sink and both share a single USBIN input on
> the PMIC.
> 
> Because the PM8150B uses USBIN to determine VBUS presence, a charger
> connected to one port causes the PMIC to falsely detect VBUS on the
> other port, preventing it from entering source mode.
> 
> For example, plugging a charger into one port prevents using the other
> port for a flash drive.
> 
> Fix this by adding support for the vbus-gpios connector binding so the
> driver can use an external GPIO for per-port VBUS presence detection
> instead of the shared USBIN register.
> 
> Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
> ---
> Changes in v2:
> - Dropped RFC prefix
> - Remove redundant vbus-detect-gpios, instead use existing vbus-gpios from usb-connector (Dmitry)
> - Updated cover to better describe scenario where this change is relevant
> - Update comment for EN_TRY_SRC to make more sense
> - Skip vSafe5V poll too not just vSafe0V
> - return gpiod_get_value_cansleep (Konrad)
> - regmap_update_bits -> regmap_set_bits (Konrad)
> - Get vbus-gpios per connector (Konrad)
> - Add bracket to if (IS_ERR(pmic_typec_port->vbus_detect_gpio)) (Bryan)
> - Link to v1: https://lore.kernel.org/r/20260308-qcom-typec-shared-vbus-v1-0-7d574b91052a@pm.me
> ---
>  drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c | 53 +++++++++++++++++++++-
>  1 file changed, 52 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
> index 8051eaa46991..a8f6687a3522 100644
> --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
> +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
> @@ -5,6 +5,7 @@
>  
>  #include <linux/delay.h>
>  #include <linux/err.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
>  #include <linux/mod_devicetable.h>
> @@ -176,6 +177,8 @@ struct pmic_typec_port {
>  	bool				vbus_enabled;
>  	struct mutex			vbus_lock;		/* VBUS state serialization */
>  
> +	struct gpio_desc		*vbus_detect_gpio;

I'd like for this to include the word 'secondary', since it's not obvious
that if an external GPIO is at play, we have two ports connected in this
uhh non-standard fashion

perhaps just secondary_vbus_detect_gpio

Konrad

  parent reply	other threads:[~2026-03-19 13:26 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-12  6:16 Alexander Koskovich
2026-03-12 10:04 ` Bryan O'Donoghue
2026-03-13  8:46 ` Heikki Krogerus
2026-03-19 13:26 ` Konrad Dybcio [this message]
2026-03-19 19:57   ` Dmitry Baryshkov
2026-03-20 10:03     ` Bryan O'Donoghue
2026-03-23  9:36       ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1fd9048c-b0c0-451a-a6f7-e5474352d118@oss.qualcomm.com \
    --to=konrad.dybcio@oss.qualcomm.com \
    --cc=akoskovich@pm.me \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®