Re: [PATCH net-next v2] dt-bindings: net: ti: k3-am654-cpsw-nuss: Document Serdes PHY

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 08/03/2023 06:18, Siddharth Vadapalli wrote:
> Update bindings to include Serdes PHY as an optional PHY, in addition to
> the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the
> Serdes PHY is optional. The Serdes PHY handle has to be provided only
> when the Serdes is being configured in a Single-Link protocol. Using the
> name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss
> driver can obtain the Serdes PHY and request the Serdes to be
> configured.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> 
> Hello,
> 
> This patch corresponds to the Serdes PHY bindings that were missed out in
> the series at:
> https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/
> This was pointed out at:
> https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/
> 
> Changes from v1:
> 1. Describe phys property with minItems, items and description.
> 2. Use minItems and items in phy-names.
> 3. Remove the description in phy-names.
> 
> v1:
> https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/
> 
>  .../bindings/net/ti,k3-am654-cpsw-nuss.yaml        | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> index 900063411a20..0fb48bb6a041 100644
> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> @@ -126,8 +126,18 @@ properties:
>              description: CPSW port number
>  
>            phys:
> -            maxItems: 1
> -            description: phandle on phy-gmii-sel PHY
> +            minItems: 1
> +            items:
> +              - description: CPSW MAC's PHY.
> +              - description: Serdes PHY. Serdes PHY is required only if
> +                             the Serdes has to be configured in the
> +                             Single-Link configuration.
> +
> +          phy-names:
> +            minItems: 1
> +            items:
> +              - const: mac-phy
> +              - const: serdes-phy

Drop "phy" suffixes.

Best regards,
Krzysztof