Re: [PATCH 1/3] clk: socfpga: agilex: convert to CLK_OF_DECLARE()

[Jerome Brunet <jbrunet@baylibre.com>]

On lun. 21 sept. 2026 at 11:17, "Ng, Adrian Ho Yin" <adrian.ho.yin.ng@altera.com> wrote:

> On 9/19/2026 6:42 AM, Brian Masney wrote:
>> Hi Adrian,
>> 
>> On Fri, Sep 11, 2026 at 03:01:18PM +0800, adrian.ho.yin.ng@altera.com wrote:
>>> From: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
>>>
>>> Register Agilex and eASIC N5X clocks at of_clk_init() so they are
>>> available before platform devices probe.
>>>
>>> Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
>>> ---
>>>   drivers/clk/socfpga/clk-agilex.c | 83 +++++++++++---------------------
>>>   1 file changed, 28 insertions(+), 55 deletions(-)
>>>
>>> diff --git a/drivers/clk/socfpga/clk-agilex.c b/drivers/clk/socfpga/clk-agilex.c
>>> index 2bdea1997b5e..64a20c727d16 100644
>>> --- a/drivers/clk/socfpga/clk-agilex.c
>>> +++ b/drivers/clk/socfpga/clk-agilex.c
>>> @@ -4,8 +4,9 @@
>>>    */
>>>   #include <linux/slab.h>
>>>   #include <linux/clk-provider.h>
>>> +#include <linux/io.h>
>>>   #include <linux/of.h>
>>> -#include <linux/platform_device.h>
>>> +#include <linux/of_address.h>
>>>   
>>>   #include <dt-bindings/clock/agilex-clock.h>
>>>   
>>> @@ -454,24 +455,26 @@ static int n5x_clk_register_pll(const struct stratix10_pll_clock *clks,
>>>   	return 0;
>>>   }
>>>   
>>> -static int agilex_clkmgr_init(struct platform_device *pdev)
>>> +static void __init agilex_clkmgr_init(struct device_node *np)
>>>   {
>>> -	struct device_node *np = pdev->dev.of_node;
>>> -	struct device *dev = &pdev->dev;
>>>   	struct stratix10_clock_data *clk_data;
>>>   	void __iomem *base;
>>>   	int i, num_clks;
>>>   
>>> -	base = devm_platform_ioremap_resource(pdev, 0);
>>> -	if (IS_ERR(base))
>>> -		return PTR_ERR(base);
>>> +	base = of_iomap(np, 0);
>>> +	if (!base) {
>>> +		pr_err("%s: failed to map clock registers\n", __func__);
>>> +		return;
>>> +	}
>>>   
>>>   	num_clks = AGILEX_NUM_CLKS;
>>>   
>>> -	clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
>>> -				num_clks), GFP_KERNEL);
>>> -	if (!clk_data)
>>> -		return -ENOMEM;
>>> +	clk_data = kzalloc(struct_size(clk_data, clk_data.hws, num_clks),
>>> +			   GFP_KERNEL);
>>> +	if (!clk_data) {
>>> +		iounmap(base);
>>> +		return;
>>> +	}
>>>   
>>>   	clk_data->clk_data.num = num_clks;
>>>   	clk_data->base = base;
>>> @@ -491,27 +494,28 @@ static int agilex_clkmgr_init(struct platform_device *pdev)
>>>   	agilex_clk_register_gate(agilex_gate_clks, ARRAY_SIZE(agilex_gate_clks),
>>>   			      clk_data);
>>>   	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data->clk_data);
>>> -	return 0;
>>>   }
>>>   
>>> -static int n5x_clkmgr_init(struct platform_device *pdev)
>>> +static void __init n5x_clkmgr_init(struct device_node *np)
>>>   {
>>> -	struct device_node *np = pdev->dev.of_node;
>>> -	struct device *dev = &pdev->dev;
>>>   	struct stratix10_clock_data *clk_data;
>>>   	void __iomem *base;
>>>   	int i, num_clks;
>>>   
>>> -	base = devm_platform_ioremap_resource(pdev, 0);
>>> -	if (IS_ERR(base))
>>> -		return PTR_ERR(base);
>>> +	base = of_iomap(np, 0);
>>> +	if (!base) {
>>> +		pr_err("%s: failed to map clock registers\n", __func__);
>>> +		return;
>>> +	}
>>>   
>>>   	num_clks = AGILEX_NUM_CLKS;
>>>   
>>> -	clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
>>> -				num_clks), GFP_KERNEL);
>>> -	if (!clk_data)
>>> -		return -ENOMEM;
>>> +	clk_data = kzalloc(struct_size(clk_data, clk_data.hws, num_clks),
>>> +			   GFP_KERNEL);
>>> +	if (!clk_data) {
>>> +		iounmap(base);
>>> +		return;
>>> +	}
>>>   
>>>   	clk_data->base = base;
>>>   	clk_data->clk_data.num = num_clks;
>>> @@ -531,38 +535,7 @@ static int n5x_clkmgr_init(struct platform_device *pdev)
>>>   	agilex_clk_register_gate(agilex_gate_clks, ARRAY_SIZE(agilex_gate_clks),
>>>   			      clk_data);
>>>   	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data->clk_data);
>>> -	return 0;
>>> -}
>>> -
>>> -static int agilex_clkmgr_probe(struct platform_device *pdev)
>>> -{
>>> -	int (*probe_func)(struct platform_device *init_func);
>>> -
>>> -	probe_func = of_device_get_match_data(&pdev->dev);
>>> -	if (!probe_func)
>>> -		return -ENODEV;
>>> -	return	probe_func(pdev);
>>>   }
>>>   
>>> -static const struct of_device_id agilex_clkmgr_match_table[] = {
>>> -	{ .compatible = "intel,agilex-clkmgr",
>>> -	  .data = agilex_clkmgr_init },
>>> -	{ .compatible = "intel,easic-n5x-clkmgr",
>>> -	  .data = n5x_clkmgr_init },
>>> -	{ }
>>> -};
>>> -
>>> -static struct platform_driver agilex_clkmgr_driver = {
>>> -	.probe		= agilex_clkmgr_probe,
>>> -	.driver		= {
>>> -		.name	= "agilex-clkmgr",
>>> -		.suppress_bind_attrs = true,
>>> -		.of_match_table = agilex_clkmgr_match_table,
>>> -	},
>>> -};
>>> -
>>> -static int __init agilex_clk_init(void)
>>> -{
>>> -	return platform_driver_register(&agilex_clkmgr_driver);
>>> -}
>>> -core_initcall(agilex_clk_init);
>>> +CLK_OF_DECLARE(agilex_clkmgr, "intel,agilex-clkmgr", agilex_clkmgr_init);
>>> +CLK_OF_DECLARE(n5x_clkmgr, "intel,easic-n5x-clkmgr", n5x_clkmgr_init);
>> 
>> Why do all of these clk providers need to be registered so early?
>> CLK_OF_DECLARE is abused quite a bit today and the majority of the clk
>> drivers that use it don't actually need it.
>> 
> Hi Brian,
>
> Thanks for the review.
>
> subsys_initcall() / subsys_platform_driver() would not fix the failure 
> we are hitting. Both still run after time_init(), while the DW APB timer 
> is registered via TIMER_OF_DECLARE from timer_probe().

You presumably only need a tiny subset of clock to feed the timer, not
the whole controller

Can you just register those early ?  clk_mt8173_infracfg* does that for example.
>
> So moving from core_initcall() to subsys_initcall() changes nothing for
> this consumer: the timer cannot defer, clk_get() still fails, and the 
> timer is never brought up. That is why these patches use 
> CLK_OF_DECLARE(): the provider must be registered from of_clk_init() so 
> clocks exist before TIMER_OF_DECLARE runs.
>
> On the broader point about CLK_OF_DECLARE abuse: I agree it should not 
> be used merely to beat platform device probe. If the preferred approach 
> is to keep the clkmgr as a platform driver (subsys_platform_driver()) 
> and give the DW APB timer nodes a fixed clock-frequency instead of a 
> clocks phandle, I can respin that way. Please let me know which you prefer.
>
> Thank You
> Adrian
>> core_initcall() is pretty early as well. Can you use subsys_initcall
>> instead so that it's available by time the platform devices probe?
>> 
>> I recently introduced a subsys_platform_driver() macro to simplify the
>> code that should do what you need.
>> 
>> https://lore.kernel.org/linux-clk/20260908-subsys_initcall-v1-0-cbccf4cd4288@redhat.com/
>> 
>> Brian
>

-- 
Jerome