From: Jerome Brunet <jbrunet@baylibre.com>
To: Ioana Ciornei <ciorneiioana@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Florian Fainelli <f.fainelli@gmail.com>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>,
Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: [PATCH net-next 06/15] net: phy: meson-gxl: remove the use of .ack_callback()
Date: Thu, 26 Nov 2020 10:02:44 +0100 [thread overview]
Message-ID: <1jim9s8p8r.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20201123153817.1616814-7-ciorneiioana@gmail.com>
On Mon 23 Nov 2020 at 16:38, Ioana Ciornei <ciorneiioana@gmail.com> wrote:
> From: Ioana Ciornei <ioana.ciornei@nxp.com>
>
> In preparation of removing the .ack_interrupt() callback, we must replace
> its occurrences (aka phy_clear_interrupt), from the 2 places where it is
> called from (phy_enable_interrupts and phy_disable_interrupts), with
> equivalent functionality.
>
> This means that clearing interrupts now becomes something that the PHY
> driver is responsible of doing, before enabling interrupts and after
> clearing them. Make this driver follow the new contract.
>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> ---
> drivers/net/phy/meson-gxl.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index b16b1cc89165..7e7904fee1d9 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -204,22 +204,27 @@ static int meson_gxl_config_intr(struct phy_device *phydev)
> int ret;
>
> if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
> + /* Ack any pending IRQ */
> + ret = meson_gxl_ack_interrupt(phydev);
> + if (ret)
> + return ret;
> +
> val = INTSRC_ANEG_PR
> | INTSRC_PARALLEL_FAULT
> | INTSRC_ANEG_LP_ACK
> | INTSRC_LINK_DOWN
> | INTSRC_REMOTE_FAULT
> | INTSRC_ANEG_COMPLETE;
> + ret = phy_write(phydev, INTSRC_MASK, val);
> } else {
> val = 0;
> - }
> + ret = phy_write(phydev, INTSRC_MASK, val);
>
> - /* Ack any pending IRQ */
> - ret = meson_gxl_ack_interrupt(phydev);
> - if (ret)
> - return ret;
> + /* Ack any pending IRQ */
> + ret = meson_gxl_ack_interrupt(phydev);
> + }
>
> - return phy_write(phydev, INTSRC_MASK, val);
> + return ret;
The only thing the above does is clear the irq *after* writing INTSRC_MASK
*only* when the interrupts are not enabled. If that was not the intent,
please let me know.
As it stands, I don't think this hunk is necessary and I would prefer if
it was not included.
> }
>
> static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
> @@ -249,7 +254,6 @@ static struct phy_driver meson_gxl_phy[] = {
> .soft_reset = genphy_soft_reset,
> .config_init = meson_gxl_config_init,
> .read_status = meson_gxl_read_status,
> - .ack_interrupt = meson_gxl_ack_interrupt,
> .config_intr = meson_gxl_config_intr,
> .handle_interrupt = meson_gxl_handle_interrupt,
> .suspend = genphy_suspend,
> @@ -260,7 +264,6 @@ static struct phy_driver meson_gxl_phy[] = {
> /* PHY_BASIC_FEATURES */
> .flags = PHY_IS_INTERNAL,
> .soft_reset = genphy_soft_reset,
> - .ack_interrupt = meson_gxl_ack_interrupt,
> .config_intr = meson_gxl_config_intr,
> .handle_interrupt = meson_gxl_handle_interrupt,
> .suspend = genphy_suspend,
next prev parent reply other threads:[~2020-11-26 9:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-23 15:38 [PATCH net-next 00/15] net: phy: add support for shared interrupts (part 3) Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 01/15] net: phy: intel-xway: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 02/15] net: phy: intel-xway: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 03/15] net: phy: icplus: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 04/15] net: phy: icplus: remove the use .ack_interrupt() Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 05/15] net: phy: meson-gxl: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 06/15] net: phy: meson-gxl: remove the use of .ack_callback() Ioana Ciornei
2020-11-26 9:02 ` Jerome Brunet [this message]
2020-11-23 15:38 ` [PATCH net-next 07/15] net: phy: micrel: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 08/15] net: phy: micrel: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 09/15] net: phy: national: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 10/15] net: phy: national: remove the use of the .ack_interrupt() Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 11/15] net: phy: ti: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 12/15] net: phy: ti: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 13/15] net: phy: qsemi: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 14/15] net: phy: qsemi: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-23 15:38 ` [PATCH net-next 15/15] net: phy: remove the .did_interrupt() and .ack_interrupt() callback Ioana Ciornei
2020-11-23 22:13 ` [PATCH net-next 00/15] net: phy: add support for shared interrupts (part 3) Martin Blumenstingl
2020-11-23 22:37 ` Jakub Kicinski
2020-11-23 22:55 ` Ioana Ciornei
2020-11-25 19:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1jim9s8p8r.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=andrew@lunn.ch \
--cc=ciorneiioana@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=narmstrong@baylibre.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®