From: Nitin Dhingra <nitin.d@usa.net>
To: linux-kernel@vger.kernel.org
Subject: A little help in SCSI Device Drivers
Date: 4 Nov 00 15:54:35 IST [thread overview]
Message-ID: <20001104102435.19069.qmail@nwcst283.netaddress.usa.net> (raw)
Respected Sir,
I had got your mail from redhat.com and came to know you are
working under drivers in Linux. I am also working in this field,
I would like you to help me out with one problem as I am stuck here
and couldn't proceed further.
I am working in a project that involves making a low-level device
driver for a SCSI card (Symbios Logic sym 53c810) and the problem
that I am facing is with interrupts. There is a kind of a script
processor in the card to which we give some instructions to interrupt
and the IRQ line 10 is supposed to be interrupted. Now the problem
is we request irq 10 and provide our ISR entry, but this ISR is never
called infact when we check /proc/interrupts or /proc/stat, there is
"0" value infront of our entry.
I have verified that interrupt has occured in the SCSI as I had
polled and found out. Now I am not able to get where could be the
problem as the interrupt is ocuuring from SCSI side and also the card
is working fine that I have checked.
Could you suggest some possible solution to this?
I would be awaiting your precious suggestion.
Thanks,
Regards,
Nitin Dhingra
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2000-11-04 10:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-04 10:24 Nitin Dhingra [this message]
2000-11-04 11:26 ` Peter Samuelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001104102435.19069.qmail@nwcst283.netaddress.usa.net \
--to=nitin.d@usa.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®