Re: Linux v2.2.17: IDE disk error on Compact Flash device

[hugang <linuxbest@sina.com>]

On Tue, 7 Nov 2000 11:58:48 -0600
Steven_Snyder@3com.com wrote:

> 
> 
> Hello.
> 
> When attempting to boot Linux kernel v2.2.17 from a Compact Flash (CF) device I
> am getting the errors shown below.  This CF device is in a PCMCIA form factor
> and is the Master device on the secondary IDE controller
> 
> Before we get to the errors, though, a little background.  I can reproduce this
> boot error on 2 different systems, and have seen the same error messages
> (non-booting) on a 3rd system.  For both boot systems the CF device is the only
> IDE device and is the Master on the secondary IDE controller (/dev/hdc).  For
> the non-booting system the device is in a PCMCIA slot (/dev/hde).
> 
> This is what I see at boot time:
> 
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: SanDisk SDCFB-128, 122MB /w1kB Cache, CHS=980/8/32
> Partition check:
>  hdc: hdc1 hdc2
>  hdc: hdc1 hdc2
> hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }  <- see /Document/Config.help
> hdc: drive_cmd: error=0x04 { DriveStatusError }


	Try to set CONFIG_IDEDISK_MULTI_MODE y.



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/