From: Jasper Spaans <jasper@spaans.ds9a.nl>
To: Andrew Morton <andrewm@uow.edu.au>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.4.0-test11pre2-ac1 and previous problem
Date: Sat, 11 Nov 2000 16:27:50 +0100 [thread overview]
Message-ID: <20001111162750.A1031@spaans.ds9a.nl> (raw)
In-Reply-To: <Pine.LNX.4.30.0011101806140.29502-100000@tfuj.ahoj.pl> <3A0C91DC.97693969@uow.edu.au>
In-Reply-To: <3A0C91DC.97693969@uow.edu.au>; from andrewm@uow.edu.au on Sat, Nov 11, 2000 at 11:25:00AM +1100
[-- Attachment #1: Type: text/plain, Size: 538 bytes --]
On Sat, Nov 11, 2000 at 11:25:00AM +1100, Andrew Morton wrote:
> > NMI Watchdog detected LOCKUP on CPU3, registers:
> Oh no. Another one. Could you please try this attached
> patch (against test11-pre2) and see if the diagnostics
> come out?
And yet another one... I applied your patch, and ran my oopses through
ksymoops, results attached.
Kernel: 2.4.0-test11-pre2 + reiserfs-3.6.18
2 * P-II 350, 256 MB RAM, no special hardware, AFAIK.
Of course, more details are available.
Regards,
--
Jasper Spaans <jasper@spaans.ds9a.nl>
[-- Attachment #2: ksymoops-output --]
[-- Type: text/plain, Size: 4120 bytes --]
ksymoops 2.3.4 on i686 2.4.0-test11. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.0-test11/ (default)
-m /boot/System.map-2.4.0-test11-pre2 (specified)
Nov 11 13:37:08 spaans kernel: NMI Watchdog detected LOCKUP on CPU1, registers:
Nov 11 13:37:08 spaans kernel: CPU: 1
Nov 11 13:37:08 spaans kernel: EIP: 0010:[tvecs+21104/42928]
Nov 11 13:37:08 spaans kernel: EFLAGS: 00000086
Nov 11 13:37:08 spaans kernel: eax: 00000000 ebx: ce780000 ecx: 00000000 edx: ffffffff
Nov 11 13:37:08 spaans kernel: esi: 00000002 edi: 00000000 ebp: cd0f1eb0 esp: cd0f1ea8
Nov 11 13:37:08 spaans kernel: ds: 0018 es: 0018 ss: 0018
Nov 11 13:37:08 spaans kernel: Process mysqld (pid: 5799, stackpage=cd0f1000)
Nov 11 13:37:08 spaans kernel: Stack: ce780000 00000021 00000000 c01152ea ce780000 00000021 00000086 c01153c6
Nov 11 13:37:08 spaans kernel: 00000021 cd0f1f04 ce780000 00040001 00000000 cd0f0000 00000021 c011589a
Nov 11 13:37:08 spaans kernel: 00000021 cd0f1f04 ce780000 cd0f0000 c1458000 cd0f0000 ce780000 00000021
Nov 11 13:37:08 spaans kernel: Call Trace: [do_ioctl+334/820] [do_ioctl+554/820] [apm+358/644] [will_become_orphaned_pgrp+14/124] [do_fork+211/2788] [do_fork+1188/2788] [do_fork+1274/2788]
Nov 11 13:37:08 spaans kernel: Code: 80 3d 00 44 2e c0 00 f3 90 7e f5 e9 67 59 ee ff 80 3b 00 f3
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 80 3d 00 44 2e c0 00 cmpb $0x0,0xc02e4400
Code; 00000007 Before first symbol
7: f3 90 repz nop
Code; 00000009 Before first symbol
9: 7e f5 jle 0 <_EIP>
Code; 0000000b Before first symbol
b: e9 67 59 ee ff jmp ffee5977 <_EIP+0xffee5977> ffee5977 <END_OF_CODE+2ec39fd0/????>
Code; 00000010 Before first symbol
10: 80 3b 00 cmpb $0x0,(%ebx)
Code; 00000013 Before first symbol
13: f3 00 00 repz add %al,(%eax)
Nov 11 13:37:08 spaans kernel: NMI Watchdog detected LOCKUP on CPU0, registers:
Nov 11 13:37:08 spaans kernel: CPU: 0
Nov 11 13:37:08 spaans kernel: EIP: 0010:[__down+339/588]
Nov 11 13:37:08 spaans kernel: EFLAGS: 00000097
Nov 11 13:37:08 spaans kernel: eax: c02e4420 ebx: ca6c0000 ecx: 00000000 edx: ffffffff
Nov 11 13:37:08 spaans kernel: esi: c02e4420 edi: ca6c1fa8 ebp: ca6c1fa8 esp: ca6c1f90
Nov 11 13:37:08 spaans kernel: ds: 0018 es: 0018 ss: 0018
Nov 11 13:37:08 spaans kernel: Process mysqld (pid: 5801, stackpage=ca6c1000)
Nov 11 13:37:08 spaans kernel: Stack: c0234797 ca6c0000 40083890 bf5ffc00 fffffff2 00000008 ca6c1fbc c0119ad4
Nov 11 13:37:08 spaans kernel: 000016a9 00000000 bf5ff8e8 bf5ff8b4 c010b203 000016a9 00000000 bf5ff8e8
Nov 11 13:37:08 spaans kernel: 40083890 bf5ffc00 bf5ff8b4 0000009c 0000002b 0000002b 0000009c 401a03e4
Nov 11 13:37:08 spaans kernel: Call Trace: [tvecs+21059/42928] [proc_sel+68/140] [restore_sigcontext+63/328]
Nov 11 13:37:08 spaans kernel: Code: 83 38 01 78 fb f0 ff 08 0f 88 ef ff ff ff c3 90 90 90 90 90
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 83 38 01 cmpl $0x1,(%eax)
Code; 00000003 Before first symbol
3: 78 fb js 0 <_EIP>
Code; 00000005 Before first symbol
5: f0 ff 08 lock decl (%eax)
Code; 00000008 Before first symbol
8: 0f 88 ef ff ff ff js fffffffd <_EIP+0xfffffffd> fffffffd <END_OF_CODE+2ed54656/????>
Code; 0000000e Before first symbol
e: c3 ret
Code; 0000000f Before first symbol
f: 90 nop
Code; 00000010 Before first symbol
10: 90 nop
Code; 00000011 Before first symbol
11: 90 nop
Code; 00000012 Before first symbol
12: 90 nop
Code; 00000013 Before first symbol
13: 90 nop
next prev parent reply other threads:[~2000-11-11 15:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-10 17:17 Pawe³ Kot
2000-11-10 17:30 ` Rik van Riel
2000-11-10 17:36 ` Pawe³ Kot
2000-11-11 0:25 ` Andrew Morton
2000-11-11 15:27 ` Jasper Spaans [this message]
2000-11-12 1:32 ` Andrew Morton
2000-11-12 2:27 ` Keith Owens
2000-11-13 8:58 ` Jasper Spaans
2000-11-13 10:44 ` Keith Owens
2000-11-13 11:16 ` Andrew Morton
2000-11-13 12:11 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001111162750.A1031@spaans.ds9a.nl \
--to=jasper@spaans.ds9a.nl \
--cc=andrewm@uow.edu.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®