From: Petr Vandrovec <vandrove@vc.cvut.cz>
To: John Cavan <johncavan@home.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Odd behaviour with agpgart
Date: Sun, 19 Nov 2000 20:39:03 +0100 [thread overview]
Message-ID: <20001119203903.E670@ppc.vc.cvut.cz> (raw)
In-Reply-To: <3A174C58.141E0C91@home.com>
In-Reply-To: <3A174C58.141E0C91@home.com>; from johncavan@home.com on Sat, Nov 18, 2000 at 10:43:20PM -0500
On Sat, Nov 18, 2000 at 10:43:20PM -0500, John Cavan wrote:
> Bus 1, device 0, function 0:
> VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 5).
> IRQ 16.
> Master Capable. Latency=64. Min Gnt=16.Max Lat=32.
> Prefetchable 32 bit memory at 0xf6000000 [0xf7ffffff].
> Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafffff].
> Non-prefetchable 32 bit memory at 0xfe000000 [0xfe7fffff].
>
> But agpgart sets up:
>
> agpgart: Maximum main memory to use for agp memory: 440M
> agpgart: Detected Intel 440BX chipset
> agpgart: AGP aperture is 32M @ 0xfa000000
AGP aperture is feature of host bridge:
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, prefetchable) [size=64M]
^^^^^^^^ ^^^^^^^^^^
Capabilities: [a0] AGP version 1.0
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G200 AGP
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at d8000000 (32-bit, prefetchable) [size=16M]
Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
Memory at d5000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Capabilities: [f0] AGP version 1.0
So it matters what you have listed in 00:00.0 node, not on Matrox device.
> Needless to say, the two disagree and direct rendering is disabled.
> Attached is my .config for 2.4.0-test11-pre7. I've been wading through
> the code for AGP and DRM support, but nothing jumps out at me.
> (http://www.matrox.com/mga/support/drivers/latest/home.htm)
As matrox driver contains large BLOB which does all important things
(dualhead) usual practices about binary only software applies.
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-11-19 20:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-19 3:43 John Cavan
2000-11-19 19:39 ` Petr Vandrovec [this message]
2000-11-19 20:47 ` John Cavan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001119203903.E670@ppc.vc.cvut.cz \
--to=vandrove@vc.cvut.cz \
--cc=johncavan@home.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®