, pol 0, trig 0, bus 5, IRQ 04, APIC ID 4, APIC INT 13 Int: type 0, pol 0, trig 0, bus 5, IRQ 0d, APIC ID 4, APIC INT 13 Int: type 0, pol 0, trig 0, bus 5, IRQ 16, APIC ID 4, APIC INT 13 Int: type 0, pol 0, trig 0, bus 5, IRQ 1f, APIC ID 4, APIC INT 13 Int: type 0, pol 0, trig 0, bus 0, IRQ 19, APIC ID 4, APIC INT 14 Int: type 0, pol 0, trig 0, bus 1, IRQ 14, APIC ID 4, APIC INT 14 Int: type 0, pol 0, trig 0, bus 0, IRQ 22, APIC ID 4, APIC INT 14 Int: type 0, pol 0, trig 0, bus 0, IRQ 2b, APIC ID 4, APIC INT 14 Int: type 0, pol 0, trig 0, bus 4, IRQ 20, APIC ID 4, APIC INT 14 Int: type 0, pol 0, trig 0, bus 4, IRQ 10, APIC ID 4, APIC INT 15 Int: type 0, pol 0, trig 0, bus 4, IRQ 18, APIC ID 4, APIC INT 16 Int: type 0, pol 0, trig 0, bus 0, IRQ 1a, APIC ID 4, APIC INT 0b Int: type 0, pol 0, trig 0, bus 0, IRQ 23, APIC ID 4, APIC INT 0b Int: type 0, pol 0, trig 0, bus 3, IRQ 10, APIC ID 4, APIC INT 0b Int: type 0, pol 0, trig 0, bus 0, IRQ 28, APIC ID 4, APIC INT 0b Int: type 0, pol 0, trig 0, bus 0, IRQ 1b, APIC ID 4, APIC INT 0e Int: type 0, pol 0, trig 0, bus 0, IRQ 20, APIC ID 4, APIC INT 0e Int: type 0, pol 0, trig 0, bus 0, IRQ 29, APIC ID 4, APIC INT 0e Int: type 0, pol 0, trig 0, bus 3, IRQ 14, APIC ID 4, APIC INT 0e Int: type 0, pol 0, trig 0, bus 0, IRQ 18, APIC ID 4, APIC INT 05 Int: type 0, pol 0, trig 0, bus 1, IRQ 10, APIC ID 4, APIC INT 05 Int: type 0, pol 0, trig 0, bus 0, IRQ 21, APIC ID 4, APIC INT 05 Int: type 0, pol 0, trig 0, bus 0, IRQ 2a, APIC ID 4, APIC INT 05 Lint: type 3, pol 1, trig 1, bus 6, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 1, trig 1, bus 6, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 4 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: auto BOOT_IMAGE=new ro root=806 BOOT_FILE=/boot/vmlinuz-2.4.0-test12 console=ttyS0,38400 console=tty0 Initializing CPU#0 Detected 549.985 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1097.73 BogoMIPS Memory: 1028812k/1048568k available (1324k kernel code, 19372k reserved, 86k data, 184k init, 131064k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Katmai) stepping 03 per-CPU timeslice cutoff: 1465.22 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 3000000 Getting ID: c000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 CPU present map: f Booting processor 1/0 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Startup point 1. Initializing CPU#1 Waiting for send to finish... CPU#1 (phys ID: 0) waiting for CALLOUT +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.73 BogoMIPS Stack at about c2119fb8 CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 OK. CPU1: Intel Pentium III (Katmai) stepping 03 CPU has booted. Booting processor 2/1 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Startup point 1. Initializing CPU#2 Waiting for send to finish... CPU#2 (phys ID: 1) waiting for CALLOUT +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 2. After Callout 2. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.73 BogoMIPS Stack at about c213dfb8 CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#2. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 OK. CPU2: Intel Pentium III (Katmai) stepping 03 CPU has booted. Booting processor 3/2 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Startup point 1. Initializing CPU#3 Waiting for send to finish... CPU#3 (phys ID: 2) waiting for CALLOUT +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 3. After Callout 3. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.73 BogoMIPS Stack at about c213bfb8 CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#3. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 OK. CPU3: Intel Pentium III (Katmai) stepping 03 CPU has booted. Before bogomips. Total of 4 processors activated (4390.91 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 4 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-10, 4-13, 4-23 not connected. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. number of MP IRQ sources: 46. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 00F 0F 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 00F 0F 1 1 0 1 0 1 1 51 06 00F 0F 0 0 0 0 0 1 1 59 07 00F 0F 0 0 0 0 0 1 1 61 08 00F 0F 0 0 0 0 0 1 1 69 09 00F 0F 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 00F 0F 1 1 0 1 0 1 1 79 0c 00F 0F 0 0 0 0 0 1 1 81 0d 000 00 1 0 0 0 0 0 0 00 0e 00F 0F 1 1 0 1 0 1 1 89 0f 00F 0F 0 0 0 0 0 1 1 91 10 00F 0F 1 1 0 1 0 1 1 99 11 00F 0F 1 1 0 1 0 1 1 A1 12 00F 0F 1 1 0 1 0 1 1 A9 13 00F 0F 1 1 0 1 0 1 1 B1 14 00F 0F 1 1 0 1 0 1 1 B9 15 00F 0F 1 1 0 1 0 1 1 C1 16 00F 0F 1 1 0 1 0 1 1 C9 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ11 -> 11 IRQ12 -> 12 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 IRQ20 -> 20 IRQ21 -> 21 IRQ22 -> 22 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 549.9848 MHz. ..... host bus clock speed is 99.9971 MHz. cpu: 0, clocks: 999971, slice: 199994 CPU0 cpu: 1, clocks: 999971, slice: 199994 cpu: 2, clocks: 999971, slice: 199994 cpu: 3, clocks: 999971, slice: 199994 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go PCI: PCI BIOS revision 2.10 entry at 0xfcc5e, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Searching for i450NX host bridges on 00:10.0 Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:02.0 PCI->APIC IRQ transform: (B0,I8,P0) -> 14 PCI->APIC IRQ transform: (B4,I4,P0) -> 21 PCI->APIC IRQ transform: (B4,I6,P0) -> 22 PCI->APIC IRQ transform: (B4,I8,P0) -> 20 PCI->APIC IRQ transform: (B1,I4,P0) -> 5 PCI->APIC IRQ transform: (B1,I5,P0) -> 20 PCI->APIC IRQ transform: (B3,I4,P0) -> 11 PCI->APIC IRQ transform: (B3,I5,P0) -> 14 got res[1000:100f] for resource 4 of Intel Corporation 82371AB PIIX4 IDE got res[1020:103f] for resource 4 of Intel Corporation 82371AB PIIX4 USB Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd v1.8 pty: 256 Unix98 ptys configured Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.35 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:27:E3:26:27, IRQ 5. Board assembly 751110-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. eth1: OEM i82557/i82558 10/100 Ethernet, 00:90:27:E3:26:28, IRQ 20. Board assembly 751110-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. eth2: OEM i82557/i82558 10/100 Ethernet, 00:90:27:E3:3F:3B, IRQ 11. Board assembly 751110-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. eth3: OEM i82557/i82558 10/100 Ethernet, 00:90:27:E3:3F:3C, IRQ 14. Board assembly 751110-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. SCSI subsystem driver Revision: 1.00 (scsi0) found at PCI 4/4/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 392 instructions downloaded (scsi1) found at PCI 4/6/0 (scsi1) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi1) Downloading sequencer code... 392 instructions downloaded (scsi2) found at PCI 4/8/0 (scsi2) Narrow Channel, SCSI ID=7, 3/255 SCBs (scsi2) Downloading sequencer code... 422 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 scsi2 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 (scsi2:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 15. Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 (scsi2:0:6:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: SONY Model: SDT-9000 Rev: 0400 Type: Sequential-Access ANSI SCSI revision: 02 megaraid: v107 (December 22, 1999) megaraid: found 0x8086:0x1960: in 00:08.1 scsi3 : Found a MegaRAID controller at 0xf880e000, IRQ: 14 megaraid: [3.13:1.43] detected 1 logical drives scsi3 : AMI MegaRAID 3.13 254 commands 16 targs 1 chans 8 luns scsi3: scanning channel 1 for devices. Vendor: DELL Model: 1x6 U2W SCSI BP Rev: 5.23 Type: Processor ANSI SCSI revision: 02 scsi3: scanning virtual channel for logical drives. Vendor: MegaRAID Model: LD0 RAID5 25704R Rev: 3.13 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi3, channel 1, id 0, lun 0 SCSI device sda: 52641792 512-byte hdwr sectors (26953 MB) Partition check: sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 65536 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kmem_create: Forcing size word alignment - nfs_fh VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding Swap: 1052216k swap-space (priority -1) Detected scsi tape st0 at scsi2, channel 0, id 6, lun 0 st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.