From: Erik Mouw <J.A.K.Mouw@ITS.TUDelft.NL>
To: Linus Torvalds <torvalds@transmeta.com>
Cc: Erik Mouw <J.A.K.Mouw@ITS.TUDelft.NL>,
Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: test12-pre6
Date: Wed, 6 Dec 2000 20:08:03 +0100 [thread overview]
Message-ID: <20001206200803.C847@arthur.ubicom.tudelft.nl> (raw)
In-Reply-To: <20001206190850.A847@arthur.ubicom.tudelft.nl> <Pine.LNX.4.10.10012061033160.1715-100000@penguin.transmeta.com>
In-Reply-To: <Pine.LNX.4.10.10012061033160.1715-100000@penguin.transmeta.com>; from torvalds@transmeta.com on Wed, Dec 06, 2000 at 10:38:51AM -0800
On Wed, Dec 06, 2000 at 10:38:51AM -0800, Linus Torvalds wrote:
> On Wed, 6 Dec 2000, Erik Mouw wrote:
> > So at first the PCI code can't allocate an IRQ for devices 00:00.1
> > (audio), 00:07.2 (USB), and 00:09.0 (winmodem), but after the audio and
> > USB modules get inserted, IRQ 5 and 11 get allocated.
>
> No, the irq stuff is a two-stage process: at first it only _reads_ the irq
> config stuff for every device - whether they have a driver or not - and at
> this stage it will not ever actually allocate and set up a new route. It
> will just see if a route has already been set up by the BIOS.
>
> Then, when a driver actually does a pci_enable_device(), it will do the
> second stage of PCI irq routing, which is to actually set up a route if
> none originally existed. So this is why you first se "failed" messages
> (the generic "test if there is a route" code) and then later when loading
> the module you see "allocated irq XX" messages.
Thanks for explaining.
> So your dmesg output looks fine, and everything is ok at that level. The
> fact that something still doesn't work for you indicates that we still
> have problems, of course.
>
> Can you tell me what device it is that doesn't work for you?
The USB controller. That's device 00:07.2:
00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host Controller (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at fcc0 [size=32]
I never tried the Winmodem, because I don't need a modem. It came free
with the laptop.
Erik
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A.K.Mouw@its.tudelft.nl
WWW: http://www-ict.its.tudelft.nl/~erik/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-12-06 19:39 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-06 7:25 test12-pre6 Linus Torvalds
2000-12-06 7:50 ` test12-pre6 Alexander Viro
2000-12-06 7:54 ` [PATCH] test12-pre6 Alexander Viro
2000-12-06 8:03 ` Alexander Viro
2000-12-06 8:06 ` Alexander Viro
2000-12-06 8:26 ` Tigran Aivazian
2000-12-06 8:38 ` Tigran Aivazian
2000-12-06 8:56 ` Tigran Aivazian
2000-12-06 9:07 ` Alexander Viro
2000-12-06 9:29 ` Tigran Aivazian
2000-12-06 8:11 ` Alexander Viro
2000-12-06 11:47 ` test12-pre6 Wakko Warner
2000-12-06 12:04 ` test12-pre6 Andrew Morton
2000-12-07 1:43 ` test12-pre6 Wakko Warner
2000-12-06 13:06 ` test12-pre6 Tobias Ringstrom
2000-12-06 13:29 ` test12-pre6 Miles Lane
2000-12-06 18:08 ` test12-pre6 Erik Mouw
2000-12-06 18:38 ` test12-pre6 Linus Torvalds
2000-12-06 19:08 ` Erik Mouw [this message]
2000-12-06 19:38 ` test12-pre6 Linus Torvalds
2000-12-06 20:09 ` test12-pre6 Erik Mouw
2000-12-06 21:06 ` test12-pre6 Jeff Garzik
2000-12-06 22:57 ` test12-pre6 Miles Lane
2000-12-06 23:10 ` test12-pre6 Johannes Erdfelt
2000-12-06 23:13 ` test12-pre6 Jeff Garzik
2000-12-06 23:17 ` test12-pre6 Miles Lane
2000-12-07 0:05 ` test12-pre6 Miles Lane
2000-12-07 1:30 test12-pre6 Dunlap, Randy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001206200803.C847@arthur.ubicom.tudelft.nl \
--to=j.a.k.mouw@its.tudelft.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®