Re: PCMCIA modem (v.90 X2) not working with 2.4.0-test12 PCMCIA services

["Jeff V. Merkey" <jmerkey@vger.timpanogas.org>]

On Tue, Dec 19, 2000 at 05:05:16PM -0700, Jeff V. Merkey wrote:

David,

Do you think there's a solution for this problem.  Sorry for bothering 
you again.  I'm available if you need some help retesting and fixes.

:-)

Jeff


> On Tue, Dec 19, 2000 at 01:51:14PM -0800, David Hinds wrote:
> > On Tue, Dec 19, 2000 at 03:41:29PM -0700, Jeff V. Merkey wrote:
> > > 
> > > On a related topic, the 3c575_cb driver on an IBM Thinkpad 765D is getting
> > > tx errors on the 2.2.18 kernel with PCMCIA services 3.1.22.
> > > 
> > > Card is a 3Com 3CCFE575BT Cyclone Cardbus Adapter.
> > > 
> > > Error is:
> > > 
> > > eth0:  transmit timed out, tx_status 00 status e000.
> > >   diagnostics net 0cc2 media a800 dma 000000a0
> > 
> > What host bridge is in the 765D?  Is it perhaps a TI 1131 rev 1, or
> > something else?  Also, try adding:
> > 
> 
> /proc/bus/pccard/00/info reports TI 1130 chipset.
> 
> >   module "3c575_cb" opts "down_poll_rate=0"
> 
> Adding this does not fix the problem, but does cause a little more
> error info to get printed.  Now in addition to the original message,
> I am also seeing:
> 
> eth0: Tx ring full, refusing to send buffer.
> 
> Looks like some type of interrupt problem.  I am available to assist 
> you in debugging this problem.
> 
> Jeff
> 
> > 
> > to /etc/pcmcia/config.opts and see if that makes any difference.
> > 
> > -- Dave
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > Please read the FAQ at http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/