From: Tony Sumner <solon@macaulay.demon.co.uk>
To: linux-kernel@vger.kernel.org
Subject: Ftape bug
Date: Tue, 9 Jan 2001 17:26:39 GMT [thread overview]
Message-ID: <200101091726.f09HQd700480@macaulay.demon.co.uk> (raw)
I have a problem with ftape. What happened was that I had a backup on
QIC80 tape that I made from Red Hat 5.2 and I (foolishly?) installed
SuSE 7.0. I then found I could not read the tape with the newer version
of ftape.
In the Ftape-HOWTO Claus Heine gives a check list of the things I
need to tell you about:
Kernel version: was 2.0.36, now 2.2.16
ftape version: 3.04d
model: Colorado Jumbo DJ-10/DJ-20
bus type: The motherboard has both ISA and PCI slots but I don't
think this is relevant because I wrote and read the tape
with the older kernel so it is not a matter of ftape not working.
what I did: I copied tob to the SuSE system and ran it. I didn't recompile
afio but used the SuSE version. All afio does is call ftape.
what went wrong: tob reported 'No input'. The log in /var/spool/messages
had a report from ftape to say that it was looking at a
new cartridge. An extract from the log is below. It was not
a new cartridge -- I have been able to read it by reloading
kernel 2.0.36 and the corresponding version 2.08 of ftape.
Current kernel: I still have it, and the file ftape.o
Another point: in Red Hat /dev/ftape is a link to /dev/rft0 while in SuSE
it is a link to /dev/qft0; Does that make any difference?
Before I try increasing the tracing level maybe you could let me know
whether this is a new thing or something you know about already.
Tony Sumner
I am not a subscriber to this mailing list so I was advised to ask
you to Cc any reply to me at solon@macaulay.demon.co.uk
-----------------------------------------------------------------
Nov 25 20:23:54 macaulay kernel: ftape v3.04d 25/11/97
Nov 25 20:23:54 macaulay kernel: (c) 1993-1996 Bas Laarhoven (bas@vimec.nl)
Nov 25 20:23:54 macaulay kernel: (c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)
Nov 25 20:23:54 macaulay kernel: (c) 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)
Nov 25 20:23:54 macaulay kernel: QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives
Nov 25 20:23:54 macaulay kernel: Compiled for Linux version 2.2.16
Nov 25 20:23:54 macaulay kernel: [000] ftape-init.c (ftape_init) - installing QIC-117 floppy tape hardware drive ... .
Nov 25 20:23:54 macaulay kernel: [001] ftape-init.c (ftape_init) - ftape_init @ 0xc283a054.
Nov 25 20:23:54 macaulay kernel: [002] ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c0917220, dma area @ c0ab8000.
Nov 25 20:23:54 macaulay kernel: [003] ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c09172c0, dma area @ c0a80000.
Nov 25 20:23:54 macaulay kernel: [004] ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c0917040, dma area @ c09f8000.
Nov 25 20:23:54 macaulay kernel: [005] ftape-calibr.c (time_inb) - inb() duration: 638 nsec.
Nov 25 20:23:54 macaulay kernel: [006] ftape-calibr.c (ftape_calibrate) - TC for `ftape_udelay()' = 840 nsec (at 10239 counts).
Nov 25 20:23:54 macaulay kernel: [007] ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 1784 nsec (at 5119 counts).
Nov 25 20:23:54 macaulay kernel: zftape for ftape v3.04d 25/11/97
Nov 25 20:23:54 macaulay kernel: (c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)
Nov 25 20:23:54 macaulay kernel: vfs interface for ftape floppy tape driver.
Nov 25 20:23:54 macaulay kernel: Support for QIC-113 compatible volume table, dynamic memory allocation
Nov 25 20:23:54 macaulay kernel: and builtin compression (lzrw3 algorithm).
Nov 25 20:23:54 macaulay kernel: Compiled for Linux version 2.2.16
Nov 25 20:23:54 macaulay kernel: [008] zftape-init.c (zft_init) - zft_init @ 0xc2861538.
Nov 25 20:23:54 macaulay kernel: [009] zftape-init.c (zft_init) - installing zftape VFS interface for ftape driver ....
Nov 25 20:23:54 macaulay kernel: [010] fdc-io.c (fdc_config) - fdc base: 0x3f0, irq: 6, dma: 2.
Nov 25 20:23:54 macaulay kernel: [011] fdc-io.c (fdc_probe) - Type 8272A/765A compatible FDC found.
Nov 25 20:23:56 macaulay kernel: [012] ftape-ctl.c (ftape_get_drive_status) - status: new cartridge.
etc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-01-09 22:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-09 17:26 Tony Sumner [this message]
2001-01-10 0:33 Mikael Pettersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200101091726.f09HQd700480@macaulay.demon.co.uk \
--to=solon@macaulay.demon.co.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®