From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 21 Jan 2001 21:02:01 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 21 Jan 2001 21:01:52 -0500 Received: from typhoon.mail.pipex.net ([158.43.128.27]:56269 "HELO typhoon.mail.pipex.net") by vger.kernel.org with SMTP id ; Sun, 21 Jan 2001 21:01:37 -0500 To: linux-kernel@vger.kernel.org From: Trevor-Hemsley@dial.pipex.com (Trevor Hemsley) Date: Mon, 22 Jan 2001 02:00:47 Subject: Re: Incorrect module init message.. X-Mailer: ProNews/2 V1.51.ib103 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Message-Id: <20010122020147Z130431-18594+148@vger.kernel.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed, 17 Jan 2001 09:09:01, "Mike A. Harris" wrote: > 1 root@asdf:/# mcdr > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray > ^^^^^ > > HP7200i burner 2x/2x/6x (CDR/CDRW/read) > > Don't know if anyone cares to fix the message.. The message is reporting current/maximum read speeds. There's no indication that this is or is not what was intended to be reported. If it was intended to be max write/read speeds then it should be using the two bytes at +18 and 19 of mode page 2a not the ones at +14 and 15. -- Trevor Hemsley, Brighton, UK. Trevor-Hemsley@dial.pipex.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/