esp causing crashes..

["Roeland Th. Jansen" <roel@grobbebol.xs4all.nl>]

[mike -- included you for refs only]

recently I started to dive into a problem that causes 2.2.x and 2.4.x to
crash at shutdown and when minicom/mgetty is used. e.g. shutdown almost
always crashed the system; if a fax is received, 3 out of 4 faxes ok,
but also crashes system.

I tried to contact the author of the hayes esp also but he seems to be
pretty busy...

Initially I thought that killall5, mike's product, somehow caused the
mentioned crash but diving deeper into it I found that killall5 tries to
kill mgetty -- and crashes the system. I tried a source version as well.
same stuff (I use suse 7.0)

I then tried without mgetty -- shutdown ok. Then I looked at esp.o as
it's being used with mgetty -- now used minicom... that crashes most
of the time when I exit the program. most of the time, it only crashes
if you reset the modem connected. 

I trouble shooted further and disconnecting the plug of the esp and at
the reconnect -- crash.

It seems that somewhere in the esp code, something causes this
particular weird crash. somehting like modem lines that get changed or
so causing the crash ? 

the IRQ is 11, not using DMA, IRQ is set to legacy in the BIOS.

it happens with any 2.2.xx version and also happens with 2.4.0.

the system's a non OC dual SMP (BP6) but it happened on the old hardware
(P5-100 w 64 MB) as well.

are there any things I could do to truble shoot this further in order to
use the esp again ?


-- 
Grobbebol's Home                   |  Don't give in to spammers.   -o)
http://www.xs4all.nl/~bengel       | Use your real e-mail address   /\
Linux 2.2.16 SMP 2x466MHz / 256 MB |        on Usenet.             _\_v  
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/