From: Phil Smith <phil@masternode.net>
To: linux-kernel@vger.kernel.org
Subject: CS4232 sound questions
Date: Thu, 22 Feb 2001 20:00:02 -0600 [thread overview]
Message-ID: <20010222200002.A451@gezr.masternode.net> (raw)
I have come to the pont of having to mail this list in search of a greater
understanding of what I could possibably be doing wrong in reguards to
enabling my sound card. Under 2.2.X I was able to include the cards
configuration during the config, yes, I understand that this has changed
in opt for other methods. These methods though are very strange and
somewhat unclear in the current documentation set. I have tried several
possible built-in and modular configs with the results being the same, below
I will include information that may or may not be what is necessary to get
possible solutions to this, but odd or exact suggestions will be greatly
appreciated. Thank you, Phil Smith
The mother board is a pr440fx intel board.
Dual ppro 200 cpus
Linux version 2.4.1 (root@gezr) (gcc version 2.95.3 20010125 (prerelease)) #8 SMP Thu Feb 22 17:44:42 CST 2001
dmesg information concerning the card
PCI->APIC IRQ transform: (B0,I17,P0) -> 18
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for Pnp cards...
isapnp: Card 'CS4236B Audio'
isapnp: 1 Plug & Play card detected total
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
lilo config line (kernel boot parameter?)
append="cs4232=0x534,5,0,3,0x330,9"
14 sound shows in /proc/devices
initial lines from /proc/isapnp (all sound card coresponding devices
show as "not active" activation can be achieved via isapnptools and
no sound working from that):
Card 1 'CSC0b35:CS4236B Audio' PnP version 1.0 Product version 0.1
Logical device 0 'CSC0000:WSS/SB'
Device is not active
Resources 0
Priority preferred
Port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding
P.S. I perfer to not use modules for sound, that may be odd, I'm not sure
about that, but I see no reason why what I have chosen to use, not to work,
I can only hope that I have missed an important note somewhere and a simple
answer will raise its head.
next reply other threads:[~2001-02-23 2:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-23 2:00 Phil Smith [this message]
2001-02-23 11:01 ` Guennadi Liakhovetski
2001-02-23 21:59 ` CS4232 sound update Phil Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010222200002.A451@gezr.masternode.net \
--to=phil@masternode.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®