From: Steve <sjthorne@ozemail.com.au>
To: linux-kernel@vger.kernel.org
Subject: 3c509 + sb16 bug
Date: Sat, 24 Feb 2001 04:33:50 +1000 [thread overview]
Message-ID: <20010224043350.A14635@ozemail.com.au> (raw)
[-- Attachment #1: Type: text/plain, Size: 2042 bytes --]
The evidence really speaks for itself:
firstly, I have been running a 2.2.18 kernel system, with a 3c509b and a
soundblaster 16 (and sundry other hardware).
The soundblaster 16 is on 0x220, irq 5. Its a soundblaster 16 (vibra 16b, '94)
The 3c509 is pnp and detects under 2.2.18 as the following:
eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 75 b7 28, IRQ 10.
Both cards work perfectly, and autodetect without any arguments.
Now:
Here are the interesting bits of the boot of the 2.4.x kernel:
PCI: PCI BIOS revision 2.10 entry at 0xfb4f0,
last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
isapnp: Scanning for Pnp cards...
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 1 Plug & Play card detected total
eth0: 3c509 at 0x220, 10baseT port, address 00 20 24 75 b7 28, IRQ 5.
3c509.c:1.16 (2.2) 2/3/98 becker@cesdis.gsfc.nasa.gov.
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
sb: I/O, IRQ, and DMA are mandatory
NB: PCI stuff was interesting, but I'm not sure if its connected to this
situation.
After bootup, at a random time interval between 10 seconds and 5 minutes the
following error spams the screen:
eth0: infinite loop in interrupt, status 2001
I can only conclude that the kernel has mistaken an ethernet card for a
sound card.
for convience, here is an lspci:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04)
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV] (rev c3)
00:08.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium]
(rev 01)
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c2)
Stephen Thorne
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
next reply other threads:[~2001-02-23 18:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-23 18:33 Steve [this message]
2001-02-23 19:01 ` J Sloan
2001-02-23 19:07 ` Alan Cox
2001-02-23 19:09 ` [FAQ] pls add migrate 2.2 -> 2.4 " Rob Cermak
2001-02-24 8:28 ` Mark Hindley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010224043350.A14635@ozemail.com.au \
--to=sjthorne@ozemail.com.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®