mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jeff V. Merkey" <jmerkey@vger.timpanogas.org>
To: Andre Hedrick <andre@linux-ide.org>
Cc: "Jeff V. Merkey" <jmerkey@timpanogas.org>,
	Guest section DW <dwguest@win.tue.nl>,
	Andreas Jellinghaus <aj@dungeon.inka.de>,
	linux-kernel@vger.kernel.org
Subject: Re: partition table: chs question
Date: Mon, 26 Feb 2001 11:22:32 -0700	[thread overview]
Message-ID: <20010226112232.B23495@vger.timpanogas.org> (raw)
In-Reply-To: <002201c09f87$5ce75640$f6976dcf@nwfs> <Pine.LNX.4.10.10102251757550.27588-100000@master.linux-ide.org>
In-Reply-To: <Pine.LNX.4.10.10102251757550.27588-100000@master.linux-ide.org>; from andre@linux-ide.org on Sun, Feb 25, 2001 at 05:59:33PM -0800

On Sun, Feb 25, 2001 at 05:59:33PM -0800, Andre Hedrick wrote:
> 
> 
> It does not matter because the usage of CHS will dies soon because it was
> voted to death in Austin last week.  There will only be LBA addressing
> from now on out.

If someone has Linux and NetWare dual booted on a system, and does not 
fill out the CHS fields properly for NetWare partitions, When NetWare 
boots, it will wipe the partition table (it will ask you first) and 
will not recognize any of the partitions.  It does this because if it 
sees CHS values it does not expect, it assumes the partition table 
has been corrupted.

Jeff


> 
> On Sun, 25 Feb 2001, Jeff V. Merkey wrote:
> 
> > 
> > Please also check vger.timpanogas.org/nwfs/nwfs.tar.gz:disk.c for NetWare
> > specific calculations of the CHS values, a different method is used for
> > NetWare partitions vs. everything else (Novell just had to be different).
> > If you do not  use their methods on NetWare partitions, NetWare will not
> > recognize the partition entries correctly, and will attempt to reinitialize
> > the entire partition table on a system if they are wrong (Ouch!).  NetWare
> > does a different calculation for conversion of cylinder values above 1024.
> > 
> > Jeff
> > 
> > 
> > ----- Original Message -----
> > From: "Guest section DW" <dwguest@win.tue.nl>
> > To: "Andreas Jellinghaus" <aj@dungeon.inka.de>;
> > <linux-kernel@vger.kernel.org>
> > Sent: Sunday, February 25, 2001 2:47 PM
> > Subject: Re: partition table: chs question
> > 
> > 
> > > On Sun, Feb 25, 2001 at 04:35:34PM +0100, Andreas Jellinghaus wrote:
> > >
> > > > for partitions not in the first 8gb of a harddisk, what
> > > > should the c/h/s start and end value be ?
> > > >
> > > > most fdisks seem to set start and end to 255/63/1023.
> > > > but partition magic creates partitions with start set to
> > > > 0/1/1023 and end set to 255/63/1023, and detects a problem
> > > > if start is set to 255/63/1023.
> > > >
> > > > so, how should a partition table look like ?
> > >
> > > Since these values will never be used you can imagine that they
> > > are not of great interest. Do whatever you like.
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at  http://www.tux.org/lkml/
> > 
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> > 
> 
> Andre Hedrick
> Linux ATA Development
> ASL Kernel Development
> -----------------------------------------------------------------------------
> ASL, Inc.                                     Toll free: 1-877-ASL-3535
> 1757 Houret Court                             Fax: 1-408-941-2071
> Milpitas, CA 95035                            Web: www.aslab.com

  reply	other threads:[~2001-02-26 17:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-02-25 15:35 Andreas Jellinghaus
2001-02-25 21:15 ` Tim Moore
2001-02-25 21:47 ` Guest section DW
2001-02-26  0:02   ` Jeff V. Merkey
2001-02-26  1:59     ` Andre Hedrick
2001-02-26 18:22       ` Jeff V. Merkey [this message]
2001-02-26 17:32         ` Andre Hedrick
2001-02-26 17:42           ` Jeff V. Merkey
2001-02-26  3:11     ` Guest section DW
2001-02-26 18:24       ` Jeff V. Merkey
2001-02-26 20:11         ` Guest section DW
2001-02-26 20:43           ` Jeff V. Merkey
2001-02-26  0:04 Jeff V. Merkey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010226112232.B23495@vger.timpanogas.org \
    --to=jmerkey@vger.timpanogas.org \
    --cc=aj@dungeon.inka.de \
    --cc=andre@linux-ide.org \
    --cc=dwguest@win.tue.nl \
    --cc=jmerkey@timpanogas.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®