mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: quintaq@yahoo.co.uk
To: <linux-kernel@vger.kernel.org>
Subject: Re: UDMA 100 / PIIX4 question
Date: Fri, 23 Mar 2001 10:27:29 +0000	[thread overview]
Message-ID: <20010323102603Z130485-407+2891@vger.kernel.org> (raw)
In-Reply-To: <3AB8FDAD.BF71A5F@bigfoot.com>
In-Reply-To: <Pine.LNX.4.10.10103201628390.8689-100000@coffee.psychology.mcmaster.ca> <3AB8FDAD.BF71A5F@bigfoot.com>

On Wed, 21 Mar 2001 11:14:53 -0800
Tim Moore <timothymoore@bigfoot.com> wrote:

> Change partition type to 'c' (fat32+LBA); check that BIOS is set for
> (AUTO or USER) and LBA.
> 
Hi Tim,

I am afraid that I do not know how to change my partition type.  I can confirm. however, that the BIOS is set to Auto / LBA and that BIOS confirms UDMA 5 is set (and cannot be set unless the correct cabling is detected).

> 
> Regarding the PIIX4, I reran basic throughput read tests on a more
> recent UDMA5, 5400RPM Maxtor on the PIIX4 and HPT366 (Abit BP6 +
> 2.2.19p17 + ide.2.2.18.1221.patch) chipsets.

<snip>

But is my controller, though detected as a PIIX4 (and described as such in the Asus manual), really a PIIX4?  lspci :

00:00.0 Host bridge: Intel Corporation: Unknown device 1130 (rev 02)
00:01.0 PCI bridge: Intel Corporation: Unknown device 1131 (rev 02)
00:1e.0 PCI bridge: Intel Corporation: Unknown device 244e (rev 01)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 2440 (rev 01)
00:1f.1 IDE interface: Intel Corporation: Unknown device 244b (rev 01)
00:1f.2 USB Controller: Intel Corporation: Unknown device 2442 (rev 01)
00:1f.3 SMBus: Intel Corporation: Unknown device 2443 (rev 01)
00:1f.4 USB Controller: Intel Corporation: Unknown device 2444 (rev 01)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
02:0a.0 Ethernet controller: Winbond Electronics Corp W89C940
02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 04)
02:0c.1 Input device controller: Creative Labs SB Live! (rev 01)
02:0d.0 Multimedia video controller: Brooktree Corporation Bt848 TV with DMA push (rev 12)
02:0e.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)

On the other hand, cat /proc/ide/piix :

                               Intel PIIX4 Ultra 100 Chipset.
--------------- Primary Channel ---------------- Secondary Channel -------------
                 enabled                          enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled:    yes              no              yes               no 
UDMA enabled:   yes              no              yes               no 
UDMA enabled:   5                X               2                 X
UDMA
DMA
PI

Regards,

Geoff

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com


  parent reply	other threads:[~2001-03-23 10:26 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-03-18 16:53 quintaq
2001-03-19 19:21 ` Tim Moore
2001-03-19 19:33   ` Jeremy Jackson
2001-03-19 20:17     ` Tim Moore
2001-03-19 20:32     ` Mark Hahn
2001-03-19 21:51       ` Tim Moore
2001-03-19 22:22     ` quintaq
2001-03-20 16:11       ` Holger Lubitz
2001-03-20 17:33         ` Jeremy Jackson
2001-03-21 14:06           ` Holger Lubitz
2001-03-20 20:21         ` quintaq
2001-03-20 21:32           ` Mark Hahn
2001-03-21 16:26             ` quintaq
2001-03-21 16:38               ` Mike Dresser
2001-03-23 10:27               ` quintaq
2001-03-21 19:14             ` Tim Moore
2001-03-23 10:27             ` quintaq [this message]
2001-03-23 21:17               ` Tim Moore
2001-03-21  9:56           ` quintaq
2001-03-21 19:18             ` Tim Moore
2001-03-21 19:29             ` Andre Hedrick
2001-03-22 13:21               ` Holger Lubitz
2001-03-23 10:27             ` quintaq
2001-03-19 19:55   ` Jeremy Jackson
2001-03-19 20:38     ` Tim Moore

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010323102603Z130485-407+2891@vger.kernel.org \
    --to=quintaq@yahoo.co.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®