From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 24 Mar 2001 10:36:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 24 Mar 2001 10:36:49 -0500 Received: from obelix.hrz.tu-chemnitz.de ([134.109.132.55]:53684 "EHLO obelix.hrz.tu-chemnitz.de") by vger.kernel.org with ESMTP id ; Sat, 24 Mar 2001 10:36:47 -0500 Date: Sat, 24 Mar 2001 16:36:05 +0100 From: Ingo Oeser To: Michael Devogelaere Cc: linux-kernel@vger.kernel.org Subject: Re: network unusable Message-ID: <20010324163605.W11126@nightmaster.csn.tu-chemnitz.de> In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from michael@digibel.be on Fri, Mar 23, 2001 at 10:44:58PM +0100 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Mar 23, 2001 at 10:44:58PM +0100, Michael Devogelaere wrote: > I'm experiencing problems with an rtl8029-nic. The computer acts as a > multicast-client receiving a disk-image from a server. That transfer went > fine during the first 1.5 gb and then the machine stopped responding. > I tried to ping it, but got no answer. On the machine i see that the > error-packets (/sbin/ifconfig) grow very fast, but the machine cannot > send or receive anymore. The arp-table contains 00:00:.. for all > hw-addresses. Dmesg shows: > eth0: bogus packet size: 65360, status=0x0 nxpg=0x0 > (repeated for 100+ times) > > The machine runs kernel 2.4.2 without module-support. All other participating > computers have exactly the same hardware and software (they were all cloned > with ghost). If i restart the program, everything goes fine for some > minutes and then another computer crashes with exactly the same symptoms. > When i restart the network-configuration, everything seems to work again. Could you tell more about your hardware? Does it still happen with 2.4.2-ac20 (which I consider most stable for now ;-))? Full dmesg from booting and after inserting the proper networking modules, your .config and lscpi -vvvv would be nice. I don't experience any problems like that here. Regards Ingo Oeser -- 10.+11.03.2001 - 3. Chemnitzer LinuxTag <<<<<<<<<<<< been there and had much fun >>>>>>>>>>>>