From: "Zephaniah E\. Hull" <warp@whitestar.soark.net>
To: Andre Hedrick <andre@linux-ide.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Lovely crash with 2.4.2-ac24.
Date: Mon, 26 Mar 2001 14:03:49 -0500 [thread overview]
Message-ID: <20010326140349.D3920@whitestar.soark.net> (raw)
In-Reply-To: <20010326132833.B3920@whitestar.soark.net> <Pine.LNX.4.10.10103261030570.14541-100000@master.linux-ide.org>
In-Reply-To: <Pine.LNX.4.10.10103261030570.14541-100000@master.linux-ide.org>; from andre@linux-ide.org on Mon, Mar 26, 2001 at 10:31:17AM -0800
[-- Attachment #1: Type: text/plain, Size: 2563 bytes --]
On Mon, Mar 26, 2001 at 10:31:17AM -0800, Andre Hedrick wrote:
> On Mon, 26 Mar 2001, Zephaniah E. Hull wrote:
>
> > On Mon, Mar 26, 2001 at 09:46:54AM -0800, Andre Hedrick wrote:
> > >
> > > Zephaniah,
> > >
> > > Does this happen in a non-ac kernel?
> > > I have not updated code since around 2.4.0, but other have.
> > > You point ot a few times w/ ac18, but is there one before that which does
> > > not cause this to happen?
> > >
> > > The question is to gain isolation of the changes.
> >
> > I'm not sure, I did not see it on 2.4.2-ac18 until I started doing a lot
> > of X compiling, but I can't reproduce at will which makes this a little
> > harder.
> >
> > I could try 2.4.2 the current 2.4.3-pre kernels from Linus if that would
> > help? (Though, as I said, it seems to happen semi-randomly, though more
> > when there is heavy disk activity.)
>
> But hardware class and vender?
K6-2 500, the MB is a Super 7, Tyan S1590S-100.
It is a VIA Apollo 3 (MVP3) AGPset chipset, only goes up to DMA/33.
The drive is a 10G Western Digital, output from the kernel on boot up below.
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
hda: WDC WD102AA, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 20044080 sectors (10263 MB) w/2048KiB Cache, CHS=1247/255/63, UDMA(33)
If I've left anything out just ask.
Zephaniah E. Hull.
<snip>
>
> Andre Hedrick
> Linux ATA Development
> ASL Kernel Development
> -----------------------------------------------------------------------------
> ASL, Inc. Toll free: 1-877-ASL-3535
> 1757 Houret Court Fax: 1-408-941-2071
> Milpitas, CA 95035 Web: www.aslab.com
>
--
PGP EA5198D1-Zephaniah E. Hull <warp@whitestar.soark.net>-GPG E65A7801
Keys available at http://whitestar.soark.net/~warp/public_keys.
CCs of replies from mailing lists are encouraged.
Having been the victim of forgeries myself, I sympathise. I've still got
my nutcraker handy for the day I identify and catch the scum...
-- Richard Gooch on l-k.
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
next prev parent reply other threads:[~2001-03-26 19:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-26 17:17 Zephaniah E. Hull
2001-03-26 17:46 ` Andre Hedrick
2001-03-26 18:28 ` Zephaniah E. Hull
2001-03-26 18:31 ` Andre Hedrick
2001-03-26 19:03 ` Zephaniah E. Hull [this message]
2001-03-27 0:39 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010326140349.D3920@whitestar.soark.net \
--to=warp@whitestar.soark.net \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®