On Thu, Apr 05, 2001 at 11:40:36AM -0700, Grover, Andrew wrote: > I'm confused. 3c59x.c has a little acpi WOL stuff, but that's it. I tried "#ifdef 0"-ing the set_WOL function body( empty function ) in 3c59x.c and enabled acpi and built another kernel and I still have the problem. So its NOT a problem with the ACPI code in 3c59x.c per se. I noticed that the following message was from net/core/netfilter.c( i got this message on running dhclient ) ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN so i diabled netfilter also, and I still had the issue. I assigned a static IP. ifconfig showed me the right info. "route" however froze most of the times. I have 2 routes 172.16.12.0 * 255.255.252.0 U 0 0 0 eth0 default 172.16.12.1 0.0.0.0 UG 0 0 0 eth0 It would freeze after the first one most often. If it did'nt, do a ping www.google.com, which will drop all the packets, and try route again, and it would freeze after the first route. I strace'd route and noticed that I was waiting on "poll". I have attached the strace info on route. > > What specifically is ACPI doing to break things? Are ACPI and the NIC > sharing any resources? I dont know about sharing resources. I have attached my dmesg. The whole thing works like a charm under APM however. I'm gonna try increasing vortex_debug level to see what happens. would be glad to furnish more info... -Prasanna Subash psubash@turbolinux.com > > Regards -- Andy > > > -----Original Message----- > > From: Prasanna P Subash [mailto:psubash@turbolinux.com] > > Sent: Thursday, April 05, 2001 11:12 AM > > To: Marcus Meissner > > Cc: linux-kernel@vger.kernel.org > > Subject: Re: [Problem] 3c90x on 2.4.3-ac3 > > Importance: High > > > > > > Thats right. ACPI was what made 3c90x not work :( With APM it > > works perfectly. > > > > Thanks Marcus. > > > > On Thu, Apr 05, 2001 at 10:14:56AM +0200, Marcus Meissner wrote: > > > In article <20010404180709.A564@turbolinux.com> you wrote: > > > > > > > hi lkml, > > > > I just built 2.4.3-ac3 with my old 2.4.2 .config and > > somehow networking does not work. > > > > dhclient eventually froze the machine. > > > > > > > here is what dhclient complains. > > > > > > > [root@psubash linux]# cat /tmp/error.txt > > > > skb: pf=2 (unowned) dev=lo len=328 > > > > PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 > > F=0x0000 T=16 > > > > DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 14 > > > > ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN > > > > skb: pf=2 (unowned) dev=lo len=328 > > > > PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 > > F=0x0000 T=16 > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 > > > > DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 12 > > > > ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN > > > > skb: pf=2 (unowned) dev=lo len=328 > > > > > > > Here is my ver_linux info > > > > > > ... > > > > CONFIG_ACPI=y > > > > > > The ACPI powermanagement for the 3c59x devices appears to > > be a bit broken. > > > > > > Disable ACPI support. Recompile. Reboot. Watch problem > > disappear hopefully. > > > > > > Ciao, Marcus > > - > > To unsubscribe from this list: send the line "unsubscribe > > linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > >