From: Andrzej Krzysztofowicz <ankry@pg.gda.pl>
To: backes@rhrk.uni-kl.de
Cc: linux-kernel@vger.kernel.org (LINUX Kernel)
Subject: Re: Kernel 2.4.4, Adaptec 7880 on board controller
Date: Fri, 11 May 2001 08:19:35 +0200 (MET DST) [thread overview]
Message-ID: <200105110619.IAA06283@sunrise.pg.gda.pl> (raw)
In-Reply-To: <XFMail.20010511064201.backes@rhrk.uni-kl.de> from "Joachim Backes" at May 11, 2001 06:42:01 AM
"Joachim Backes wrote:"
> when booting on a machine having an Adaptec 7880 on board
> controller (Kernel 2.4.4), then i get the following msg:
> ...
> SCSI subsystem driver Revision: 1.00
> request_module[scsi_hostadapter]: Root fs not mounted
> request_module[scsi_hostadapter]: Root fs not mounted
> request_module[scsi_hostadapter]: Root fs not mounted
> ...
> The aic7xxx scsi driver is not configured as module,
> but linked to the kernel.
Hmmm, I observe similar messages when
- scsi low-level driver (eg. sd, sr, st) linked to the kernel,
- no appropriate (corresponding to any of the above drivers) devices found
on the hostadapters which have support linked to the kernel.
I don't think it is driver-specyfic. As I looked at the code it would be
difficult to avoid them (unless a linked-to-the-kernel function is able
to detect whether it is called from __init code or from a module
initialization code).
--
=======================================================================
Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl
phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math., Technical University of Gdansk
prev parent reply other threads:[~2001-05-11 6:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-11 4:42 Joachim Backes
2001-05-11 4:58 ` Justin T. Gibbs
2001-05-11 6:19 ` Andrzej Krzysztofowicz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200105110619.IAA06283@sunrise.pg.gda.pl \
--to=ankry@pg.gda.pl \
--cc=ankry@green.mif.pg.gda.pl \
--cc=backes@rhrk.uni-kl.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®