From: thunder7@xs4all.nl
To: linux-kernel@vger.kernel.org
Cc: alan@lxorguk.ukuu.org.uk
Subject: 2.4.4-ac6: timeout waiting for DMA on hpt370 / ibm DJNA drive
Date: Fri, 11 May 2001 08:44:17 +0200 [thread overview]
Message-ID: <20010511084417.A4460@middle.of.nowhere> (raw)
I got these messages in 2.4.4-ac5, and now in 2.4.4-ac6, when I expire
my news-spool. In 2.4.4, there's no problem expring my newsspool and
running 2 bonnie's in the background.
May 11 00:47:25 middle kernel: hdg: timeout waiting for DMA
May 11 00:47:25 middle kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
May 11 00:47:25 middle kernel: hdg: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
May 11 00:56:20 middle kernel: hdg: timeout waiting for DMA
May 11 00:56:20 middle kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
May 11 00:56:20 middle kernel: hdg: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
May 11 00:56:30 middle kernel: hdg: timeout waiting for DMA
May 11 00:56:30 middle kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
May 11 00:56:30 middle kernel: hdg: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
Info from 2.4.4:
block: queued sectors max/low 340506kB/209434kB, 1024 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
HPT370: IDE controller on PCI bus 00 dev 70
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio
hda: Maxtor 33073H3, ATA DISK drive
hde: IBM-DTLA-307045, ATA DISK drive
hdg: IBM-DJNA-372200, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xdc00-0xdc07,0xe002 on irq 10
ide3 at 0xe400-0xe407,0xe802 on irq 10
hda: 60032448 sectors (30737 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(100)
hde: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63, UDMA(100)
hdg: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=43800/16/63, UDMA(33)
Partition check:
hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hda4
hde: [PTBL] [5606/255/63] hde1 hde2 hde3 hde4
hdg: hdg1 hdg2 hdg3 hdg4
Floppy drive(s): fd0 is 1.44M
HPT370 Chipset.
--------------- Primary Channel ---------------- Secondary Channel -------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: yes no yes no
UDMA
DMA
PIO
Good luck,
Jurriaan
--
BOFH excuse #24:
network packets travelling uphill (use a carrier pigeon)
GNU/Linux 2.4.4 SMP/ReiserFS 2x1402 bogomips load av: 0.42 0.10 0.03
next reply other threads:[~2001-05-11 6:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-11 6:44 thunder7 [this message]
2001-05-11 17:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010511084417.A4460@middle.of.nowhere \
--to=thunder7@xs4all.nl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®