From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 29 May 2001 18:27:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 29 May 2001 18:26:55 -0400 Received: from mailout01.sul.t-online.com ([194.25.134.80]:28429 "EHLO mailout01.sul.t-online.de") by vger.kernel.org with ESMTP id ; Tue, 29 May 2001 18:26:45 -0400 Date: Wed, 30 May 2001 00:26:32 +0200 From: Marc Schiffbauer To: LKML Subject: Re: new aic7xxx oopses with AHA2940 Message-ID: <20010530002632.A7734@lisa.links2linux.home> Mail-Followup-To: LKML In-Reply-To: <20010527042129.A12765@lisa.links2linux.home> <200105291855.f4TIteU27159@aslan.scsiguy.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200105291855.f4TIteU27159@aslan.scsiguy.com>; from gibbs@scsiguy.com on Tue, May 29, 2001 at 12:55:40PM -0600 X-Operating-System: Linux 2.2.18-lisa01 i586 X-Editor: VIM 5.7.8 X-Homepage: http://www.links2linux.de Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org * Justin T. Gibbs schrieb am 29.05.01 um 20:55 Uhr: > >OK. Now I cut out the Oops out of my /var/log/messages, then did > > Can you provide the full dmesg from a working kernel for you system? > I need to know the type of controller in use as well as some other > system attributes. > sure. but its only the old aic7xxx driver. The new one is not working . I was one thing missing, sorry: The new driver has been working. He did it since I installed Wi***** 2k on the 4G scsi-disk (maybe random?). Maybe that fuc**** Billysoft has "tuned" my Controller firmware?? I don't think (hope!) thats possible... dmesg: Linux version 2.4.5 (root@homer) (gcc version 2.95.2 19991024 (release)) #5 Sun May 27 13:11:31 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 4096 bytes. On node 0 totalpages: 131052 zone(0): 4096 pages. zone(1): 126956 pages. zone(2): 0 pages. mapped APIC to ffffe000 (01884000) Kernel command line: auto BOOT_IMAGE=linux ro root=307 Initializing CPU#0 Detected 807.220 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1608.90 BogoMIPS Memory: 512868k/524208k available (1333k kernel code, 10952k reserved, 471k data, 184k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1150, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:04.0 Found VT82C686A, not applying VIA latency patch. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module pty: 256 Unix98 ptys configured Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d block: queued sectors max/low 340869kB/209797kB, 1024 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio PDC20265: IDE controller on PCI bus 00 dev 88 PCI: Found IRQ 10 for device 00:11.0 PCI: The same IRQ used for device 00:0b.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:pio hda: ST320430A, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 011, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 40079088 sectors (20520 MB) w/512KiB Cache, CHS=39761/16/63, UDMA(66) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 9 for device 00:0d.0 PCI: The same IRQ used for device 00:04.2 PCI: The same IRQ used for device 00:04.3 (scsi0) found at PCI 0/13/0 (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs (scsi0) Downloading sequencer code... 415 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 (scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: PLEXTOR Model: CD-ROM PX-8XCS Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:0:5:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: TEAC Model: CD-R58S Rev: 1.0K Type: CD-ROM ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PIONEER Model: DVD-ROM DVD-105 Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 2, lun 0 SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB) sda: sda1 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0 Detected scsi CD-ROM sr2 at scsi1, channel 0, id 0, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr2: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ACPI: APM is already active, exiting VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding Swap: 265568k swap-space (priority -1) reiserfs: checking transaction log (device 03:0a) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:08) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:09) ... Using r5 hash to sort names ReiserFS version 3.6.25 NTFS version 010116 Warning! NTFS volume version is Win2k+: Mounting read-only usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.259 $ time 17:21:57 May 26 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 9 for device 00:04.2 PCI: The same IRQ used for device 00:04.3 PCI: The same IRQ used for device 00:0d.0 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:04.3 PCI: The same IRQ used for device 00:04.2 PCI: The same IRQ used for device 00:0d.0 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.251 Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber usb-uhci.c: USB Universal Host Controller Interface driver hub.c: USB new device connect on bus2/2, assigned device number 2 hub.c: USB hub found hub.c: 4 ports detected Creative EMU10K1 PCI Audio Driver, version 0.7, 17:21:48 May 26 2001 PCI: Found IRQ 10 for device 00:0b.0 PCI: The same IRQ used for device 00:11.0 emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xa400-0xa41f, IRQ 10 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PCI: Found IRQ 11 for device 00:0c.0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:27:0F:5E:23, IRQ 11. Receiver lock-up bug exists -- enabling work-around. Board assembly 697680-002, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. /dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-1118 $ /dev/vmmon: Module vmmon: initialized /dev/vmnet: open called by PID 363 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached NVRM: loading NVIDIA kernel module version 1.0-1251 /dev/vmnet: open called by PID 533 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened -- | ...and don't forget: Linux rulez! | | | | http://www.links2linux.de <-- Von Linux-Usern fuer Linux-User |