From: Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
To: elmer@ylenurme.ee, alan@lxorguk.ukuu.org.uk (Alan Cox)
Cc: linux-kernel@vger.kernel.org (kernel list)
Subject: [PATCH] net #4
Date: Wed, 30 May 2001 02:42:10 +0200 (CEST) [thread overview]
Message-ID: <200105300042.CAA04518@green.mif.pg.gda.pl> (raw)
The following patch fixes network drivers configuration in some points:
- make sb1000 dependent on CONFIG_ISAPNP. It compiles without CONFIG_ISAPNP,
but will not work as the driver relies on ISA PnP board detection
- de620 does not support build-in configuration (dependency on "m" now).
It compiles, but requires io/irq module parameters for board detection
(even ether= is not supported by this driver)
- Aironet fixes:
-- Aironet PnP requires CONFIG_ISAPNP (y or m) to work; of course, when
CONFIG_ISAPNP=m CONFIG_AIRONET4500_NONCS also should be "m", but
this is not supported by CML1; to be fixed in CML2 or in another way
-- Aironet I365 and ISA detection for built-in driver is not supported
currently, so disable these options if CONFIG_AIRONET4500_NONCS=y
Andrzej
************************* PATCH 5 ***********************************
diff -uNr linux-2.4.5-ac4/drivers/net/Config.in linux/drivers/net/Config.in
--- linux-2.4.5-ac4/drivers/net/Config.in Mon May 28 01:34:54 2001
+++ linux/drivers/net/Config.in Wed May 30 01:11:56 2001
@@ -15,7 +15,7 @@
fi
fi
-tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000
+dep_tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000 $CONFIG_ISAPNP
#
# Ethernet
@@ -180,7 +180,7 @@
if [ "$CONFIG_NET_POCKET" = "y" ]; then
dep_tristate ' AT-LAN-TEC/RealTek pocket adapter support' CONFIG_ATP $CONFIG_ISA
tristate ' D-Link DE600 pocket adapter support' CONFIG_DE600
- tristate ' D-Link DE620 pocket adapter support' CONFIG_DE620
+ dep_tristate ' D-Link DE620 pocket adapter support' CONFIG_DE620 m
fi
fi
@@ -264,10 +264,14 @@
tristate ' Aironet 4500/4800 series adapters' CONFIG_AIRONET4500
dep_tristate ' Aironet 4500/4800 ISA/PCI/PNP/365 support ' CONFIG_AIRONET4500_NONCS $CONFIG_AIRONET4500
if [ "$CONFIG_AIRONET4500" != "n" -a "$CONFIG_AIRONET4500_NONCS" != "n" ]; then
- bool ' Aironet 4500/4800 PNP support ' CONFIG_AIRONET4500_PNP
+ if [ "$CONFIG_AIRONET4500_NONCS" = "m" -a "$CONFIG_ISAPNP" = "m" -o "$CONFIG_ISAPNP" = "y" ]; then
+ bool ' Aironet 4500/4800 PNP support ' CONFIG_AIRONET4500_PNP
+ fi
dep_bool ' Aironet 4500/4800 PCI support ' CONFIG_AIRONET4500_PCI $CONFIG_PCI
- dep_bool ' Aironet 4500/4800 ISA broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_ISA $CONFIG_EXPERIMENTAL
- dep_bool ' Aironet 4500/4800 I365 broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_I365 $CONFIG_EXPERIMENTAL
+ if [ "$CONFIG_AIRONET4500_NONCS" = "m" ]; then
+ dep_bool ' Aironet 4500/4800 ISA broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_ISA $CONFIG_EXPERIMENTAL
+ dep_bool ' Aironet 4500/4800 I365 broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_I365 $CONFIG_EXPERIMENTAL
+ fi
fi
dep_tristate ' Aironet 4500/4800 PROC interface ' CONFIG_AIRONET4500_PROC $CONFIG_AIRONET4500 m
--
=======================================================================
Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl
phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math., Technical University of Gdansk
reply other threads:[~2001-05-30 0:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200105300042.CAA04518@green.mif.pg.gda.pl \
--to=ankry@green.mif.pg.gda.pl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=elmer@ylenurme.ee \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®