Linux version 2.2.19 (root@debian) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #2 Sun Apr 22 21:21:38 CEST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 0fef0000 @ 00100000 (usable)
Detected 801838 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1599.07 BogoMIPS
Memory: 257840k/262080k available (932k kernel code, 412k reserved, 2824k data, 72k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb2d0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
PDC20265: IDE controller on PCI bus 00 dev 60
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide1: BM-DMA at 0xdc00-0xdc07, BIOS settings: hdc:DMA, hdd:pio
    ide2: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hde:pio, hdf:pio
hda: FUJITSU MPG3102AH, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14


 -----> Silent stop when trying SMP


hda: FUJITSU MPG3102AH, 9541MB w/2048kB Cache, CHS=1216/255/63, UDMA(66)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 498004k swap-space (priority -1)
rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: RealTek RTL8139 Fast Ethernet at 0xe800, IRQ 11, 00:48:54:53:a2:fa.
ncr53c8xx: at PCI bus 0, device 17, function 0
ncr53c8xx: 53c810 detected 
ncr53c810-0: rev 0x2 on pci bus 0 device 17 function 0 irq 15
ncr53c810-0: ID 7, Fast-10, Parity Checking
scsi0 : ncr53c8xx-3.4.1-20000726
scsi : 1 host.
  Vendor: PIONEER   Model: DVD-ROM DVD-303   Rev: 1.09
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
ncr53c810-0-<2,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 8)
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A