From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 8 Jun 2001 23:52:41 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 8 Jun 2001 23:52:31 -0400 Received: from saturn.cs.uml.edu ([129.63.8.2]:41490 "EHLO saturn.cs.uml.edu") by vger.kernel.org with ESMTP id ; Fri, 8 Jun 2001 23:52:14 -0400 From: "Albert D. Cahalan" Message-Id: <200106090352.f593q7M491225@saturn.cs.uml.edu> Subject: Re: temperature standard - global config option? To: jcwren@jcwren.com Date: Fri, 8 Jun 2001 23:52:07 -0400 (EDT) Cc: linux-kernel@vger.kernel.org In-Reply-To: from "John Chris Wren" at Jun 08, 2001 07:53:06 PM X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org John Chris Wren writes: > coupling to the CPU that is about as bad as it can get. You've got an epoxy > housing of an inconsistent shape in contact with ceramic. The actual > contact point is miniscule. There's no thermal paste, and often, I've seen > the sensors not quite raised high enough to contact the chip (you should be > able to rack a business card across the empty socket and feel a slight > "bump" as you touch the sensor. If not, you need to bend it up slightly, to > give better physical contact to the CPU). > > But in spite of all this, you're not really measure the critical > temperature, which is junction tempature. Yes, case tempature has *some* There are processors with temperature measurement built right into the silicon. > For the record, in the course of a normal day, I see my temperatures > fluctuate from 48C with the house A/C set to 73, to 56C when I open the > doors, and let it get up to 76 in the house. That's 8C (14.4F) over a 3F > change in ambient. This makes sense. Heat increases resistance, which generates heat. At some point, a tiny increase will cause thermal run-away.