usb.c: USB device not accepting new address=4 (error=-110)

[Ingo Oeser <ingo.oeser@informatik.tu-chemnitz.de>]

[-- Attachment #1: Type: text/plain, Size: 905 bytes --]

Hi there,

please CC me to replies on linux-usb-devel, since I'm not
subscribed there.

I try to use my Handspring Visor USB craddle with Linux. I've
seen, that this will work, but all the other people use a UHCI
driver for this, so this could be as well an OHCI issue.

loaded modules:
visor                  10256   0  (unused)
usbserial              18128   0  [visor]
usb-ohci               22352   0  (unused)
usbcore                58256   1  [visor usbserial usb-ohci]

Pressing the hotsync button, I get the message from the subject
line (with variing values for "address"). Even plugging into
another USB port doesn't help. Only the usb port adress changes.

lspci -vvvv (attached)
.config (attached)
kernel messages since boot (attached)

Would be nice, if we can solve/debug this ;-)

Regards

Ingo Oeser
-- 
To the systems programmer,
users and applications serve only to provide a test load.

[-- Attachment #2: pci.bz2 --]
[-- Type: application/octet-stream, Size: 1258 bytes --]

[-- Attachment #3: .config.bz2 --]
[-- Type: application/octet-stream, Size: 5091 bytes --]

[-- Attachment #4: debug.bz2 --]
[-- Type: application/octet-stream, Size: 5013 bytes --]