mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Manfred H. Winter" <mahowi@gmx.net>
To: Andrew Morton <andrewm@uow.edu.au>
Cc: Linux Kernel List <linux-kernel@vger.kernel.org>
Subject: Re: PROBLEM: [2.4.6] kernel BUG at softirq.c:206!
Date: Thu, 5 Jul 2001 16:28:12 +0200	[thread overview]
Message-ID: <20010705162812.A602@marvin.mahowi.de> (raw)
In-Reply-To: <3B4450DF.82EEC851@uow.edu.au>

Hi Andrew!

On Thu, 05 Jul 2001, Andrew Morton wrote:

> > kernel panic every time (see original post). My CPU is a MediaGX, and
> > Manfred's one is a 6x86MX. What about yours ?
> > After my first unsuccessful attempt with a 2.4.6-pre3, I tried several other
> > 2.4.6-preX and 2.4.5-acX kernels. All 2.4.6 (since pre1) seem to be
> > affected, and so do the latest ac's. I don't have tested 2.4.7-pre[12] yet,
> > but looking at the changelog, I doubt the fix is in.
> 
> 
> It may help to know which tasklet is in the wrong state.
> Could you please add this patch:
> 
> --- linux-2.4.6/kernel/softirq.c	Wed Jul  4 18:21:32 2001
> +++ lk-ext3/kernel/softirq.c	Thu Jul  5 21:32:08 2001
> @@ -202,8 +202,10 @@ static void tasklet_hi_action(struct sof
>  		if (!tasklet_trylock(t))
>  			BUG();
>  repeat:
> -		if (!test_and_clear_bit(TASKLET_STATE_SCHED, &t->state))
> +		if (!test_and_clear_bit(TASKLET_STATE_SCHED, &t->state)) {
> +			printk("func: %p\n", t->func);
>  			BUG();
> +		}
>  		if (!atomic_read(&t->count)) {
>  			local_irq_enable();
>  			t->func(t->data);
> 

Okay, here's the output of gdb:

(gdb) x/10i 0xc0118028
0xc0118028 <bh_action>: mov    0x4(%esp,1),%eax
0xc011802c <bh_action+4>:       cmpl   $0x0,0xc025c2e4
0xc0118033 <bh_action+11>:      jne    0xc0118043 <bh_action+27>
0xc0118035 <bh_action+13>:      mov    0xc024af20(,%eax,4),%eax
0xc011803c <bh_action+20>:      test   %eax,%eax
0xc011803e <bh_action+22>:      je     0xc0118042 <bh_action+26>
0xc0118040 <bh_action+24>:      call   *%eax
0xc0118042 <bh_action+26>:      ret
0xc0118043 <bh_action+27>:      lea    (%eax,%eax,4),%eax
0xc0118046 <bh_action+30>:      lea    0xc025bf80(,%eax,4),%eax

HTH,

Manfred
-- 
 /"\                        | PGP-Key available at Public Key Servers
 \ /  ASCII ribbon campaign | or "http://www.mahowi.de/pgp/mahowi.asc"
  X   against HTML mail     | RSA: 0xC05BC0F5 * DSS: 0x4613B5CA
 / \  and postings          | AIM: mahowi42   * ICQ: 61597169

       reply	other threads:[~2001-07-05 15:12 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <3B4450DF.82EEC851@uow.edu.au>
2001-07-05 14:28 ` Manfred H. Winter [this message]
2001-07-05 15:23   ` Andrew Morton
2001-07-05 17:31     ` Manfred H. Winter
     [not found] <E15I8gj-0002W7-00@the-village.bc.nu>
2001-07-05 13:59 ` Bob_Tracy
2001-07-05 12:14 Bob_Tracy
2001-07-05 13:42 ` Alan Cox
2001-07-05 14:02   ` Bob_Tracy
  -- strict thread matches above, loose matches on Subject: below --
2001-07-04 21:28 Manfred H. Winter
2001-07-05  7:46 ` Mircea Damian
2001-07-05 11:18   ` Alan Cox
2001-07-05 12:10     ` Bob_Tracy
2001-07-05 13:04     ` Mircea Damian
2001-07-05 14:15     ` Manfred H. Winter
2001-07-05 10:52 ` Thibaut Laurent
2001-07-05 13:00   ` Mircea Damian
2001-07-05 11:04 ` Manfred H. Winter
2001-07-05 14:20 ` Andrea Arcangeli
2001-07-05 14:30   ` Alan Cox
2001-07-05 14:36   ` Arjan van de Ven
2001-07-05 14:40     ` Andrea Arcangeli
2001-07-05 15:32     ` Thibaut Laurent
2001-07-05 15:46       ` Arjan van de Ven
2001-07-05 15:56         ` Andrew Morton
2001-07-05 16:04           ` Alan Cox
2001-07-05 16:11             ` Andrew Morton
2001-07-05 16:15         ` Andrea Arcangeli
2001-07-05 22:40           ` Bob_Tracy
2001-07-06  3:42             ` Andrew Morton
2001-07-06 10:58         ` Manfred H. Winter
2001-07-06 12:43       ` Andrea Arcangeli
2001-07-06 14:18       ` Thibaut Laurent
2001-07-06 15:02         ` Andrea Arcangeli
2001-07-05 15:19   ` Manfred H. Winter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010705162812.A602@marvin.mahowi.de \
    --to=mahowi@gmx.net \
    --cc=andrewm@uow.edu.au \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®