From: majordomo kernel <majordomo_kernel@yahoo.com>
To: Keith Owens <kaos@ocs.com.au>, Olaf Hering <olh@suse.de>
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: Re: new scsi hardware detection in 2.4.7(pre)
Date: Mon, 30 Jul 2001 10:30:44 -0700 (PDT) [thread overview]
Message-ID: <20010730173044.69085.qmail@web13905.mail.yahoo.com> (raw)
In-Reply-To: <24749.996500350@ocs3.ocs-net>
It makes more sense if U can send a copy to SCSI group
too.People like Eric and many others only looks at the
linux-scsi group.I think by doing this U can cater to
a wider group of people and more specifically this
sort
of issues are relavant to both -kernel and scsi group.
I hope and expect that in future this will be taken
care of.
Thanx
--- Keith Owens <kaos@ocs.com.au> wrote:
> On Mon, 30 Jul 2001 15:31:17 +0200,
> Olaf Hering <olh@suse.de> wrote:
> >On Tue, Jul 24, Keith Owens wrote:
> >
> >> On Mon, 23 Jul 2001 17:10:19 +0200,
> >> Olaf Hering <olh@suse.de> wrote:
> >> >I get this on non-scsi systems with scsi
> compiled into the kernel:
> >> >
> >> >SCSI subsystem driver Revision: 1.00
> >> >request_module[scsi_hostadapter]: Root fs not
> mounted
> >> >request_module[scsi_hostadapter]: Root fs not
> mounted
> >> >request_module[scsi_hostadapter]: Root fs not
> mounted
> >>
> >> The SCSI midlayer is trying to load the SCSI host
> adapter, that is an
> >> unavoidable side effect of including SCSI
> support. Because no adapter
> >> is found, kmod tries to automatically load a
> module that can find a
> >> host adapter. The "Root fs not mounted" message
> occurs when you try to
> >> load any module before / is mounted.
> >
> >Does that make any sense? I mean, there are some
> scsi drivers, none of
> >them found a valid device, why do we look for more
> drivers? It would
> >make sense if there are no low level device drivers
> in the kernel
> >binary.
>
> There is no way for the mid layer to distinguish
> between "no SCSI card
> configured into kernel" and "SCSI card configured
> but failed to detect
> hardware". Even when there is a card built into the
> kernel, it still
> makes sense to scan for modules if the initial card
> failed. That gives
> you fallback to modules when you change your
> hardware.
>
> If you boot a SCSI kernel on a non-SCSI box then you
> should alias
> scsi_hostadapter off. You still get the 'Root fs
> not mounted' warning
> messages, just ignore them. If you are using one
> kernel build for lots
> of different hardware you should be using initrd,
> then the root fs
> messages go away as well.
>
> -
> To unsubscribe from this list: send the line
> "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at
> http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
prev parent reply other threads:[~2001-07-30 17:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-07-23 15:10 Olaf Hering
2001-07-24 1:59 ` Keith Owens
2001-07-30 13:31 ` Olaf Hering
2001-07-30 13:39 ` Keith Owens
2001-07-30 17:30 ` majordomo kernel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010730173044.69085.qmail@web13905.mail.yahoo.com \
--to=majordomo_kernel@yahoo.com \
--cc=kaos@ocs.com.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=olh@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®