From: Matthias Andree <matthias.andree@stud.uni-dortmund.de>
To: Paul <pstroud@bellsouth.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Mulitple 3c509 cards 2.4.x Kernel
Date: Fri, 3 Aug 2001 20:04:57 +0200 [thread overview]
Message-ID: <20010803200457.C31468@emma1.emma.line.org> (raw)
In-Reply-To: <3B6ADBA7.2FC0AE2A@bellsouth.net>
In-Reply-To: <3B6ADBA7.2FC0AE2A@bellsouth.net>
On Fri, 03 Aug 2001, Paul wrote:
> I have a x86 server with multiple(2) 3c509 cards. When I build the
> 3c509 driver into the kernel. It will only pick up a single card. The
> cards are NOT in pnp mode according to isapnp on boot. I have added:
>
> append = "ether=3,0x300,0,0,eth0 ether=10,0x280,0,0,eth1"
>
> to the lilo file and still only one card is detected. The io ports and
> irq's come direct from /proc with the 2.2.13 kernel in place. There
You should use 2.2.19 nowadays. 2.2.13 is insecure.
Are the cards themselves in ISAPNP mode or in fixed-address/IRQ mode?
Linux 2.4 has ISAPNP capabilities if you choose so at compile time,
these might move the card. Check your boot logs and /proc/isapnp and
/proc/sys/isapnp.
> are no messages about anything failing, only the message that the one
> card was found. It appears the card on the higher io(0x300) is the
> only one that is ever found.
Did you re-run lilo?
next prev parent reply other threads:[~2001-08-03 18:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-03 17:13 Paul
2001-08-03 17:46 ` William Park
2001-08-03 18:04 ` Matthias Andree [this message]
2001-08-10 6:46 ` Paul Gortmaker
2001-08-03 21:26 Paul Stroud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010803200457.C31468@emma1.emma.line.org \
--to=matthias.andree@stud.uni-dortmund.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pstroud@bellsouth.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®