From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 11 Aug 2001 14:04:07 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 11 Aug 2001 14:03:58 -0400 Received: from redbull.speedroad.net ([195.139.232.25]:1288 "HELO redbull.speedroad.net") by vger.kernel.org with SMTP id convert rfc822-to-8bit; Sat, 11 Aug 2001 14:03:52 -0400 Date: Sat, 11 Aug 2001 20:01:54 +0200 From: Arnvid Karstad To: Linux Kernel List Subject: Kernel crashes in 2.4.x with SMP Message-Id: <20010811193940.34CD.ARNVID@karstad.org> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 8BIT X-Mailer: Becky! ver. 2.00.06 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hiya, I've tested 2.4.x on several computers with SMP. One of them I wrote about earlier.. and another I've just recently been able to get the kernel panic information from since it's located in in another country. It crashes with a similar message as the other.. is this an hw error? or something else? ;) Maybe a bad driver for the E1000 nic.. ? Dmesg: 0000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002ffffc00 (ACPI data) BIOS-e820: 000000002ffffc00 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) found SMP MP-table at 000f6ac0 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. On node 0 totalpages: 196592 zone(0): 4096 pages. zone(1): 192496 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: SBT2 APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #4 Version 17 at 0xFEC00000. I/O APIC #5 Version 17 at 0xFEC01000. Processors: 2 Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/vmlinuz Initializing CPU#0 Detected 931.030 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1854.66 BogoMIPS Memory: 770632k/786368k available (1251k kernel code, 15344k reserved, 391k data, 204k init, 0k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 731.28 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1861.22 BogoMIPS CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (3715.89 BogoMIPS). ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 4 ... ok. ...changing IO-APIC physical APIC ID to 5 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-2, 4-5, 4-9, 4-10, 4-11, 5-5, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 17. number of IO-APIC #4 registers: 16. number of IO-APIC #5 registers: 16. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 0 0 0 0 0 1 1 31 01 003 03 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 003 03 0 0 0 0 0 1 1 71 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : IO APIC version: 0011 .... register #02: 0F000000 ....... : arbitration: 0F .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 89 01 003 03 1 1 0 1 0 1 1 91 02 003 03 1 1 0 1 0 1 1 99 03 003 03 1 1 0 1 0 1 1 A1 04 003 03 1 1 0 1 0 1 1 A9 05 000 00 1 0 0 0 0 0 0 00 06 003 03 1 1 0 1 0 1 1 B1 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ22 -> 1:6 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 930.9679 MHz. ..... host bus clock speed is 132.9952 MHz. cpu: 0, clocks: 1329952, slice: 443317 CPU0 cpu: 1, clocks: 1329952, slice: 443317 CPU1 checking TSC synchronization across CPUs: passed. PCI: PCI BIOS revision 2.10 entry at 0xfdb47, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Discovered peer bus 01 PCI->APIC IRQ transform: (B0,I2,P0) -> 19 PCI->APIC IRQ transform: (B0,I3,P0) -> 18 PCI->APIC IRQ transform: (B1,I4,P0) -> 16 PCI->APIC IRQ transform: (B1,I4,P1) -> 17 PCI->APIC IRQ transform: (B1,I12,P0) -> 22 PCI->APIC IRQ transform: (B2,I8,P0) -> 20 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Simple Boot Flag extension found and enabled. Starting kswapd v1.8 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: queued sectors max/low 511610kB/380538kB, 1536 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ServerWorks OSB4: IDE controller on PCI bus 00 dev 79 ServerWorks OSB4: chipset revision 0 ServerWorks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x5440-0x5447, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x5448-0x544f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD307AA, ATA DISK drive hdb: SONY CDU4811, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=3739/255/63, UDMA(33) hdb: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 > Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 DAC960: ***** DAC960 RAID Driver Version 2.4.10 of 1 February 2001 ***** DAC960: Copyright 1998-2001 by Leonard N. Zubkoff DAC960#0: Configuring Mylex eXtremeRAID 2000 PCI RAID Controller DAC960#0: Firmware Version: 6.00-01, Channels: 4, Memory Size: 32MB DAC960#0: PCI Bus: 2, Device: 8, Function: 0, I/O Address: Unassigned DAC960#0: PCI Address: 0xF8000000 mapped at 0xF0800000, IRQ Channel: 20 DAC960#0: Controller Queue Depth: 512, Maximum Blocks per Command: 2048 DAC960#0: Driver Queue Depth: 511, Scatter/Gather Limit: 128 of 257 Segments DAC960#0: Physical Devices: DAC960#0: 0:0 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: TFFEB196 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 0:1 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3V888 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 0:2 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3K791 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 0:3 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3X071 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 0:4 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3K885 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 0:6 Vendor: ESG-SHV Model: SCA HSBP M14 Revision: 0.01 DAC960#0: Asynchronous DAC960#0: 0:7 Vendor: MYLEX Model: eXtremeRAID 2000 Revision: 0600 DAC960#0: Wide Synchronous at 160 MB/sec DAC960#0: Serial Number: DAC960#0: 1:0 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3T862 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 1:1 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3T550 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 1:2 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3P559 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 1:3 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3W070 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 1:4 Vendor: IBM Model: DDYS-T36950M Revision: S93E DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY3K011 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: 1:6 Vendor: ESG-SHV Model: SCA HSBP M14 Revision: 0.01 DAC960#0: Asynchronous DAC960#0: 1:7 Vendor: MYLEX Model: eXtremeRAID 2000 Revision: 0600 DAC960#0: Wide Synchronous at 160 MB/sec DAC960#0: Serial Number: DAC960#0: 2:7 Vendor: MYLEX Model: eXtremeRAID 2000 Revision: 0600 DAC960#0: Wide Synchronous at 160 MB/sec DAC960#0: Serial Number: DAC960#0: 3:7 Vendor: MYLEX Model: eXtremeRAID 2000 Revision: 0600 DAC960#0: Wide Synchronous at 160 MB/sec DAC960#0: Serial Number: DAC960#0: Logical Drives: DAC960#0: /dev/rd/c0d0: RAID-0, Online, 716513280 blocks DAC960#0: Logical Device Initialized, BIOS Geometry: 255/63 DAC960#0: Stripe Size: 64KB, Segment Size: 8KB DAC960#0: Read Cache Disabled, Write Cache Disabled rd/c0d0: rd/c0d0p1 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:B6:13:9F, IRQ 18. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 690M agpgart: no supported devices found. [drm] Initialized tdfx 1.0.0 20000928 on minor 63 [drm:radeon_init] *ERROR* Cannot initialize agpgart module. SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 204k freed Adding Swap: 2048248k swap-space (priority -1) DAC960#0: Physical Device 0:6 Found DAC960#0: Physical Device 1:6 Found DAC960#0: Physical Device 1:0 Found DAC960#0: Physical Device 0:0 Found DAC960#0: Physical Device 0:1 Found DAC960#0: Physical Device 0:2 Found DAC960#0: Physical Device 0:3 Found DAC960#0: Physical Device 0:4 Found DAC960#0: Physical Device 1:1 Found DAC960#0: Physical Device 1:2 Found DAC960#0: Physical Device 1:3 Found DAC960#0: Physical Device 1:4 Found DAC960#0: Physical Device 0:0 Online DAC960#0: Physical Device 0:1 Online DAC960#0: Physical Device 0:2 Online DAC960#0: Physical Device 0:3 Online DAC960#0: Physical Device 0:4 Online DAC960#0: Physical Device 1:0 Online DAC960#0: Physical Device 1:1 Online DAC960#0: Physical Device 1:2 Online DAC960#0: Physical Device 1:3 Online DAC960#0: Physical Device 1:4 Online DAC960#0: Logical Drive 0 (/dev/rd/c0d0) Found DAC960#0: Logical Drive 0 (/dev/rd/c0d0) Online DAC960#0: Controller Battery Backup Unit Found DAC960#0: Enclosure 1 Temperature Sensor 0 OK DAC960#0: Enclosure 2 Temperature Sensor 0 OK Intel(R) PRO/1000 Network Driver - version 3.0.16 Copyright (c) 1999-2001 Intel Corporation. Intel(R) PRO/1000 Network Connection eth1: Mem:0xf6020000 IRQ:22 Speed:1000 Mbps Duplex:Full Kernel Crash message: Warning: kfree_skb passed an skb still on a list (from c01f0689) invalid operand: 0000 CPU: 0 EIP: 0010:[] EFLAGS: 00010286 eax: 00000045 ebx: ef73e8a0 ecx: 00000002 edx: 02000000 esi: ef73ebc0 edi: 00000000 ebp: c02d657c esp: eb8fbe18 ds: 0018 es: 0018 ss: 0018 Prosess glftpd pid (pid: 1116, stackpage=eb8fb000) Stack: c0269ca0 c01f0689 ef73e8a0 00000000 c01f0689 ef73ebc0 c02d6068 00000001 fffffffb 00000000 ef73ebc0 c0119adf c02d6068 ee671b60 c02ffa48 00000000 eb8fa000 00000246 c0237264 00000000 c02ffa48 00000001 ee671c38 7fffffff Call Trace: [] [] [] [] [] [] [] [] [] [] Code: 0f 0b 83 c4 08 8b 44 24 0c 8b 40 28 85 c0 74 04 f0 ff 48 04 <0>Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing EIP: 0010:[] - c01ed3d0 T skb_clone Call Trace: [] c01f0630 t net_tx_action [] c01f0630 t net_tx_action [] c0119a70 T do_softirq [] c0230e5c T stext_lock <--? [] c0202808 t tcp_close_state [] c021a440 t inet_getname [] c01ea324 T sock_recvmsg [] c01ea47c t sock_write [] c0132468 T sys_read [] c0106ca8 T system_call regards, Arnvid Karstad