From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 14 Aug 2001 06:54:29 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 14 Aug 2001 06:54:19 -0400 Received: from sunrise.pg.gda.pl ([153.19.40.230]:30355 "EHLO sunrise.pg.gda.pl") by vger.kernel.org with ESMTP id ; Tue, 14 Aug 2001 06:54:05 -0400 From: Andrzej Krzysztofowicz Message-Id: <200108141053.MAA00375@sunrise.pg.gda.pl> Subject: Re: 3c905b works with 10bt hub - not with 10/100 switch To: aaronl@vitelus.com (Aaron Lehmann) Date: Tue, 14 Aug 2001 12:53:53 +0200 (MET DST) Cc: linux-kernel@vger.kernel.org In-Reply-To: <20010814031851.A374@vitelus.com> from "Aaron Lehmann" at Aug 14, 2001 03:18:51 AM Reply-To: ankry@green.mif.pg.gda.pl X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Aaron Lehmann wrote: > On Tue, Aug 14, 2001 at 02:14:45AM -0700, Aaron Lehmann wrote: > > I've been having major problems on my network as of today. > > I seem to have solved this problem. > > I put in a 3c595 - same problem. > > Luckily, I had the persistance to try another card. I chose to try > Client's eth0 as Server's eth2. Well, it worked. > > I hope this network setup will work on a switch for longer than the > 3c905b did. Did you check the board's NVRAM setting for media type ? AFAIR changing Auto/Manual was related with this problem. But I hit it about three years ago... Andrzej -- ======================================================================= Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl phone (48)(58) 347 14 61 Faculty of Applied Phys. & Math., Technical University of Gdansk