From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 29 Aug 2001 09:18:12 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 29 Aug 2001 09:18:03 -0400 Received: from erm1.u-strasbg.fr ([130.79.74.61]:23815 "HELO erm1.u-strasbg.fr") by vger.kernel.org with SMTP id ; Wed, 29 Aug 2001 09:17:47 -0400 Date: Wed, 29 Aug 2001 15:29:25 +0200 To: linux-kernel@vger.kernel.org Subject: [AMD] 79c970 ethernet card problems..... Message-ID: <20010829152925.H1357@erm1.u-strasbg.fr> Mail-Followup-To: bboett@erm1.u-strasbg.fr, linux-kernel@vger.kernel.org Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline User-Agent: Mutt/1.3.15i From: bboett@erm1.u-strasbg.fr (Bruno Boettcher) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org hello! my motherboard assigns it IRQ without any distinction, i have several cards on the same interrupt, e.g. the 2 ethernet cards are on irq 10 at the moment .... so maybe this is the real problem ... anyways i have: lspci: 00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (rev 02) Flags: stepping, medium devsel, IRQ 10 I/O ports at e000 [size=32] /etc/modutils/network: options lance io=0xe000 irq=10 alias eth1 lance irq=10 in /var/log/messages: Aug 29 12:25:16 kalman kernel: eth0: Lite-On PNIC-II rev 37 at 0xdc00, 00:C0:F0:7B:E2:D6, IRQ 10. Aug 29 12:25:16 kalman kernel: lance.c: No PCnet/LANCE card found (i/o = 0xe000). same when i try to insmod it by hand: modprobe eth1 /lib/modules/2.4.9/kernel/drivers/net/lance.o: init_module: No such device or address Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.9/kernel/drivers/net/lance.o: insmod /lib/modules/2.4.9/kernel/drivers/net/lance.o failed /lib/modules/2.4.9/kernel/drivers/net/lance.o: insmod eth1 failed ayahhh, for a short time this second card responded to pings.... no it wont even load.... what's going wrong? and is there any way i can change the IRQ's of those damn cards? the module options need the iorq settings but are completely ignoring them! (and i have currently 4 cards on irq9 and 2 on irq10....) -- ciao bboett ============================================================== bboett@earthling.net http://inforezo.u-strasbg.fr/~bboett http://erm1.u-strasbg.fr/~bboett =============================================================== the total amount of intelligence on earth is constant. human population is growing....