From: Hans-Joachim Baader <hjb@pro-linux.de>
To: linux-kernel@vger.kernel.org
Subject: Aha1542 problem
Date: Sun, 9 Sep 2001 09:11:26 +0200 [thread overview]
Message-ID: <20010909091126.O22352@mandel.hjb.de> (raw)
Hi,
unrelated to any other event, my aha1542b starts to fail. I find messages
like these below in my log. Unloading and reloading the driver helps, but
only for a short time.
HACC <4>aha1542.c: interrupt received, but no mail.
aha1542.c: Unable to abort command for target 0
aha1542.c: Trying device reset for target 0
HACC <4>aha1542.c: interrupt received, but no mail.
HACC <4>aha1542.c: interrupt received, but no mail.
aha1542.c: Unable to abort command for target 0
Sent BUS RESET to scsi host 0
aha1542.c: interrupt received, but no mail.
scsi: device set offline - not ready or command retry failed after host reset: host 0 channel 0 id 0 lun 0
st0: Error 2 (sugg. bt 0x0, driver bt 0x0, host bt 0x0).
scsi : 0 hosts left.
System: Dual P-200 MMX, Kernel 2.4.8-pre3 with ext3 patch.
/proc/interrupts:
CPU0 CPU1
0: 57555063 58669574 IO-APIC-edge timer
1: 0 2 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 1 3 IO-APIC-edge serial
8: 26 30 IO-APIC-edge rtc
10: 339970 351627 IO-APIC-edge aha1542
17: 5557414 5562660 IO-APIC-level ide0
18: 13365797 13366581 IO-APIC-level eth0
NMI: 0 0
LOC: 116232016 116232731
ERR: 0
MIS: 0
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TANDBERG Model: TDC 4222 Rev: =07:
Type: Sequential-Access ANSI SCSI revision: 02
Thanks,
hjb
--
Pro-Linux - Germany's largest volunteer Linux support site
http://www.pro-linux.de/
reply other threads:[~2001-09-09 7:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010909091126.O22352@mandel.hjb.de \
--to=hjb@pro-linux.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®