From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 24 Sep 2001 23:33:34 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 24 Sep 2001 23:33:24 -0400 Received: from mail01g.rapidsite.net ([207.158.192.232]:19037 "HELO mail01g.rapidsite.net") by vger.kernel.org with SMTP id ; Mon, 24 Sep 2001 23:33:15 -0400 Content-Type: text/plain; charset=US-ASCII From: David Koretzky Reply-To: david@spanware.com Organization: Spanware To: linux-kernel@vger.kernel.org Subject: Kernel Panic New Adaptec - Old Adaptec Works Date: Mon, 24 Sep 2001 23:34:26 -0400 X-Mailer: KMail [version 1.3.1] MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT X-Loop-Detect: 1 Message-Id: <20010925033318Z274451-760+16507@vger.kernel.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I am running a dual PIII 933 VIA based motherboard (Gigabyte 6VXDC7). I have two Seagate Cheetah HDs, and two SCSI cdroms. There are no IDE devices anywhere in the system, and no support is compiled in the kernel or as a module for IDE. Kernel 2.4.7 works perfectly. I cannot get 2.4.10 to work with the new aha driver compiled into the kernel. Below is what I was able to capture of the output Disconnected List inconsistency. SCB index == 255, yet numscbs=4.scsi0 Dumping card state while ide, at SEQADDR 0x1a5 ACCNUM=0x0 SINDEX=0x0 DINDEX=0x0 ARG_2=0x7f HCNT=0x0 SCSI SEQ=0x12 SBLKCTL=0xa DFNCTRL=0x0 DFSTATUS=0x89 LAST PHASE=0x1 SCSISIGI=0x0 SXFRCTL0=0x88 SSTAT0=0x0 SSTAT1=0x0 STACK=0x0, 0x0, 0x0, 0x0 SCB_COUNT=4 KERNEL NEXTQSCB=3 CARD NEXTQSCB=3 QINFIFO Entries: Waiting Queue Entries: Disconnected Queue Entries: 0:255...31:255 QOUTFIFO entries: Sequencer Free SCB List: 0...31 Pending List: Kernel Free SCB List: 2 1 0 Kernel Panic : For Safety I am currently running 2.4.10 with the old Doug Ledford driver, and it works perfectly. P.S. Could you please CC me any help? Thank you. -- David Koretzky david@spanware.com